Turn-Mill Centre

Okuma Multus B300 II

Condition: used, Year of construction: 2003, machine/vehicle number: 247078, Max. turning diameter: 630 mm Max. machinable diameter: 630 mm Max. distance between centers: 900 mm Travel: X-axis: 580 mm (+480 / –20 mm) Z-axis: 935 mm Y-axis: 160 mm (+80 / –80 mm) C-axis: 360° (in 0.001° increments) B-axis: 225° (–30° / +195°; in 0.001° increments) Spindle speed: 50 – 5,000 rpm Tailstock type: NC-controlled, MT5 Spindle nose: A2-8 Spindle bore: Ø 80 mm Spindle bearing diameter: Ø 120 mm Turret type: H1-ATC Tool holder: HSK-A63 Number of stations: 1 Tool magazine capacity: 40 tools Tool size: 25 × 25 mm Shank diameter: Ø 32 mm Max. tool diameter: Ø 90 mm Max. tool length: 300 mm Max. tool weight: 8 kg Driven tool power (5 min / continuous): VAC 11 / 7.5 kW Milling spindle speed: 50 – 6,000 rpm Milling spindle torque (5 min / continuous): 65.7 / 44.8 Nm Feed rate: 0.001 – 1,000 mm/rev Rapid traverse: X-axis: 40 m/min Z-axis: 40 m/min Y-axis: 26 m/min C-axis: 200 rpm B-axis: 30 rpm Spindle motor power (30 min / continuous): OKUMA PREX 15 / 11 kW Spindle motor torque (10 / 20 min / continuous): 412 / 281 Nm Feed axis motor power: Z-axis: OKUMA BL 2.8 kW X-axis: OKUMA BL 3.5 kW Y-axis: OKUMA BL 2.9 kW W-axis (tailstock): OKUMA BL 2.9 kW Coolant pressure through milling spindle: 20 bar Coolant pump capacity: 0.8 kW Machine dimensions (L × W × H): 4,035 × 2,257 × 2,587 mm Machine weight: 10,000 kg Hedpfxsxtn Erj Ad Djnw Control system: OKUMA OSP-P300SA Display: 15" touchscreen (OSP Suite)

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm Hsdow H Awlepfx Ad Dsnw input Power : 12 kW Torque: 237 Nm

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Hnedpfxjxg Umps Ad Dow Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2023, operating hours: 213 h, functionality: fully functional, OSP-P300SA control system with LCD screen Max. turning diameter 630 mm Max. turning length 900 mm X travel 580 mm (+480 / -20 mm) Y travel 160 mm (+80 / -80 mm) Z travel 935 mm Spindle end A2-8 Spindle bore D80 mm Main spindle speed 50 - 5000 rpm C axis 360° (0.001 degrees) B axis 225° (-30° / +195°; 0.001° increment) Power of driven tools (5 min/cont.) VAC 11/7.5 kW Milling spindle speed 50-6,000 rpm Milling spindle torque (5 min/cont.) 65.7 / 44.8 Nm HAS-A63 chuck Number of tools: 40 Motor: 15/11 kW Feed range: 0.001 – 1,000 mm/rev Rapid traverse (X) 40 m/min Rapid traverse (Z) 40 m/min Rapid traverse (Y) 26 m/min Hnjdpfx Ajwrr Nhod Dew Tailstock travel: 1,000 mm Tailstock taper: MT5 Power requirement: Dimensions (L x W x H) = 4,035 x 2,257 x 2,587 mm Weight: 10,000 kg Features, accessories - Internal coolant supply: 20 bar - Kitagawa B-212A8 12" chuck - NC tailstock - B-axis indexing in 0.001 degrees - Coolant supply through the milling spindle - Dual foot pedal - Y-axis travel: 160 mm (+80 / -80 mm) - Hydraulic Device - Thermo-Friendly Concept - H1 TAS-S and TAS-C - CAS - Collision Avoidance System - *10 dB Coordinate Measurement (1 set) - Control Software: * Coordinate Transformation (1 set) * Profile Generation (1 set) * Coordinate Calculation (1 set) * Coordinate Change, Rotation, and Copy (1 set) * Realistic 3D Simulation (1 set) * Cycle Time Monitoring (1 set) * Load Monitoring (Main Spindle, Slide) (1 set) * Program Run Monitoring (1 set) * 2-Color Signal Lamps (1 set) Chip conveyor Coolant system Machine feet Documentation The machine is being sold due to company redundancy. It's in mint condition. It's only been in use for approximately 213 hours.

Condition: good (used), Year of construction: 2002, Hurco VMX 30, year of construction 2002, Ultimax 4 control unit, Travel X/Y/Z 760/510/610 mm, table size 1020 x 510 mm, 24-position tool changer, spindle speed up to 10,000 rpm, coolant system, Hodpfx Ajtud Ncjd Djnw electric handwheel, Pocket milling with islands, synchronous thread cutting, 3D contour software, DXF capable, chip conveyor,

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hnsdpfewmg U Isx Ad Djw Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: Hnsdjlzhhkspfx Ad Dsw - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Hnjdpfx Aefu Nbbsd Dsw Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Condition: used, Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Hsdog Nqlijpfx Ad Denw Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Hodpfxsxqq Hys Ad Donw