CNC lathe
Optimum L28 HS CNC

Name: Optimum L28 HS CNC
Brand: Optimum
Price: 22299 EUR
Availability: InStock

ONO plus VAT

€22,299

Year of construction

2025

Condition

Ex-display machine

Location

Hallstadt

Show map

Machine data

Machine type:: CNC lathe

Manufacturer:: Optimum

Model:: L28 HS CNC

Year of construction:: 2025

Condition:: as good as new (ex-display)

Price & Location

ONO plus VAT

€22,299

Location:: Dr.-Robert-Pfleger-Straße 26, 96103 Hallstadt, Deutschland

Call

Details about the offer

Listing ID:: A19662181

Update:: 22.10.2025

Description

Optiturn L28 HS CNC lathe directly from the manufacturer.

L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150.

Strutted machine bed made of gray cast iron
- Elaborate spindle bearings
- Emergency stop impact switch
- Central lubrication
- Reference switch
- Maintenance-friendly protective housing
- Rear access flap for maintenance
- Safety switch on the front sliding door
- Turning turret is located behind the turning center (left turning tool)
- Linear guide
- Software package "SINUMERIK 808D on PC" included. (Practical training software, so that
workpieces can be programmed and simulated offline on the PC. Free to
download free of charge
- Two-year SIEMENS warranty included

Technical data

Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 3.75 kVA

Spindle
Drive motor S1 operation 2.2 kW
Torque drive motor S1 operation 14 Nm
Torque at the spindle 28 Nm
Spindle holder DIN 6350 A2-3
Spindle cone 5C
Spindle bore Ø 30 mm
Dedpjw Ebngefx Agdoul
Cooling lubricant system
Coolant pump output 95 W
Tank capacity 25 liters

Machine data
Center height 169 mm
Center width 430 mm
Rotation Ø over cross slide Ø 200 mm
Rotation Ø over machine bed Ø 300 mm
Speed range
Spindle speeds* 40 - 4,000 min-1

Tool turret
Type electric
Number of tool positions 6 tools
Mounting height, width square max. 16 mm
Mounting diameter of boring bar max. 16 mm

Accuracy
Repeat accuracy ± 0.01 mm
Positioning accuracy ± 0.01 mm

Bhajn7pvcu

Travel distance
X-axis 145 mm
Z-axis 465 mm

Feed speed
X-axis 10,000 mm/min.
Z-axis 12,000 mm/min.

Machine leasing possible via Siemens Finance. Liquidity required.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

25 listings online

Call

Send inquiry

Telephone & Fax

+49 951 9... show

These listings may also fit your interest.

Listing

CNC lathe with bar loader Miyano ABX-64SYY

Umkirch

7,913 km

CNC lathe with bar loader
MiyanoABX-64SYY

Call

Condition: good (used), Year of construction: 2011, functionality: fully functional, CNC Turning Center with Bar Loader Manufacturer: Miyano Type: ABX-64SYY Year of Manufacture: 2011/06 Control: Fanuc 31i-B Technical Specifications: Workpiece Length SP1/SP2: 118mm / 125mm Bar Diameter: 64mm Turning Diameter: 165mm Number of Turrets: 2 Speed: 6,000 rpm Machine Weight: 11,000kg Djdpfx Ajwdh U Rjgdjul

See details

Listing

Germany

7,804 km

Lathe - cycle controled
SEIGERSLZ500E

Call

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Solid tailstock, quill Ø 90 mm with internal taper MK5 Djdswmcx Aepfx Agdsul Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. *

See details

Listing

CNC portal milling machine dia. 2000mm UNISIGN UNIPORT 6000

Düsseldorf

7,655 km

CNC portal milling machine dia. 2000mm
UNISIGNUNIPORT 6000

Call

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. Dsdovvh T Sspfx Agdeul A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

See details

Listing

Cnc bench Hastastar/Hatabur Hatastar POP 50500

Oebisfelde

7,818 km

Cnc bench
Hastastar/HataburHatastar POP 50500

Call

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation Dujdpfx Agod Egc Ajdsl universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm

See details

Listing

Marlenheim

7,860 km

Band saw
AmadaHFA 1000 C II

Call

Listing

Hattingen

7,668 km

Vertical Turning Machine
EMAGVL2

Call

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details Dedpfxoqvd Ius Agdeul were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

See details

Listing

Neuenkirchen

7,672 km

CNC lathe
DMT KERNDMT CD1100

Call

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Tailstock: Dedpfxjxlza Hj Agdoul - Quill diameter: 125 mm - Taper: 6 Mk Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.

See details

Listing

Portal milling machine UNISIGN Uniport 6000

Düsseldorf

7,655 km

Portal milling machine
UNISIGNUniport 6000

Call

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! Duedevvh R Dspfx Agdol TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing. The machine is in operation and can be inspected on site. A video of the machine is available.

See details

Listing

CNC Turning- and Milling Center TRAUB TNX 65

Germany

7,640 km

CNC Turning- and Milling Center
TRAUBTNX 65

Call

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm Dedpfx Agowp D Nbedoul turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

See details

Listing

Vertical machining center AWEA BM-1200-II

Cuggiono

8,142 km

Vertical machining center
AWEABM-1200-II

Call

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, workpiece weight (max.): 1,200 kg, total height: 24,920 mm, total length: 38,970 mm, total width: 30,700 mm, table width: 650 mm, table length: 1,300 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 11 W, spindle nose: Iso 40, tool length: 250 mm, tool diameter: 75 mm, tool weight: 7 g, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1200 II" with FANUC 0i-MF Plus CNC Accessories standard: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Duodpfxerhi Rke Agdol Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light

See details

Advertise here

CNC latheOptimum L28 HS CNC

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

CNC lathe
Optimum L28 HS CNC