Thread rolling machine

Pee-Wee P24US

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Todpfxjwgnz Aj Aqxea Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Tedouz If Njpfx Aqxsa Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Tedpfox H Rmusx Aqxsa Shaft Ø: 85 - 135mm Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Todpeq U Ihvjfx Aqxsa Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Condition: excellent (used), Year of construction: 2011, operating hours: 7,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller model: FANUC 21iMB, overall weight: 7,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT-40, number of slots in tool magazine: 30, Equipment: documentation/manual, rotational speed infinitely variable, The used VICTOR A110 vertical machining center is a small/medium-sized 3-axis continuous CNC machining center; table size 1350×600 mm, X travel 1,100 mm, Y 600 mm, Z 560 mm, year of manufacture 2011 (installed in 2013), CE-compliant, equipped with FANUC 21i-MB CNC with Manual Guide i, rapid feed of 42 m/min, axis acceleration of 0.75G, working feed of 12 m/min, weight 7,400 kg. It is equipped with a BT-40 milling spindle, 12,000 rpm, 15 kW, cooled by dedicated chiller, belt-type chip conveyor, double internal auger, tank washing system, high-pressure through-spindle coolant, 32-position random tool changer, door, memory card slot, Ethernet RJ 45 port, and RS 232 serial port. Only just over 13,000 power-on hours and 7,000 spindle hours (original). PERFECT WORKING CONDITION! Tedpfx Aqsx Hap Eexoa

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm Todpfx Aqexwp Eboxea spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: ready for operation (used), turning diameter over cross slide: 800 mm, turning diameter: 800 mm, turning diameter over bed slide: 560 mm, Center Lathe VDF V6 Tjdpfxexpillo Aqxoa Distance between centers: 5000 mm Turning diameter: Over guides: 800 mm Over carriage: 560 mm Spindle speed: 560 rpm Motor power: 11 kW Accessories: Steady rests: 330 mm and 420 mm

Condition: used, Year of construction: 2006, Technical details: x-travel: 1000 / 600 mm y-travel: 570 mm z-travel: 570 mm control: Fagor 8055 MC tool changer with: 24 Plätze tool taper: SK 40 Revolution per minute: 10 000 U/min. Tsdpou Idfrefx Aqxea spindle taper: SK40 feed speeds infinitely variable: X/Y/Z: 10 m/min. rapid traverse:: X/Y/Z: 24 m/min. operating hours - idle run: nicht einsehbar h table-size: 1200 x 500 mm table load capacity: 800 kg distance spindle nose and table: min./max. 100/670 mm interface: 232 total power requirement: 15 kW Weight approx.: 5,0 t dimension machine xH: 3,3 x 2,3 x 2,8 m Equipment: -Cooling device with feed to the spindle (no CTS cooling through spindle)) -operating panel with manual control unit -chip conveyor -E-cabinet cooling Rittal SK 3305500 *

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t Tjdpfew D Aq Tox Aqxea workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 Tedpfx Aqou Et Nbsxoa - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine