TRIPLE WATER DRAIN WITH HIGH FREQUENCY MOTOR

PLASTMAK PVC ALÜMİNYUM İŞLEME MAKİNELERİ SÇ 521 S

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 100 h is ideal for frequently changing section lengths and for stopping long materials. It enables the carriage to be moved quickly and precisely using a hand crank. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • Suitable for hitting steel profiles and solid materials • Hand wheel drive for the carriage • Pneumatic stop clamping with high holding power • digital actual length display in the working area • Direct distance measurement via sensor / magnetic tape • Control with dimensional error compensation • Trolley with 3 ball bearings • raise and lower manual arm • Cable chain with steel storage tray • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.5 m • Left or right hand versions available • Mounting screws Cgsdeidmp Tspfx Af Del • Accesories: – Stop arm with spring damping – Arm retraction with impact damping via pneumatic cylinder – pneumatic arm raise / lower – Piece counter for the number of pieces/cuts made – various material roller conveyors

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg Cedpfx Aowgi Sijf Dogl with table feed Description has been adopted.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. Csdpfxeramzus Af Degl • The machine can cut at +45, -45, and intermediate angles. • Quick setting stops for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic for practical use. • Diamond saw blade diameter is Ø400 mm. • Standard with measuring and material handling conveyors (2.5 meters on both left and right sides). • Cooling unit for cutting aluminum profiles. • Capability to work with a digital meter. OPTIONAL: • Roller conveyor system (3 meters on both left and right sides).

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds Cedpfjrbf R Tex Af Dogl - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Year of construction: 1998, condition: good (used), Used Emmegi Automatica 550 Single head cutting-off machine from 1998 in good condition for 90 degress cutting of aluminium profiles, with pneumatic bar feeder and stop, as well as adjustment of cutting length and tolerance op to +/- 0,10 mm of the required size. Csdetlpl Hopfx Af Djgl Specifications: • Blade diameter: 550mm • Blade drive power: 4 kW • Blade drive rpm (50hz): 2840 1/min • Total installed power: 4,3 kW • Operating pressure: 6-8 bar • Max. Feeder stroke: 500mm • Max. Clamp opening, feeder: 410mm

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. Cgsdpfx Ajramz Hjf Dol - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Cgsdouiy Nyopfx Af Dol Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). Cedpfx Aforahzgj Degl • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Condition: excellent (used), STROMAB CT800 Beam Cutting Centre A cutting centre for beams with large cross-sections, making it the optimal solution for carpentry and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cuts. It guarantees maximum processing speed and finished product quality while reducing labour requirements and maximizing productivity. The CT800 can process beams of any length, with cross-sections ranging from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilting upper clamps. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table movement and repeat cutting: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table movement and repeat cutting: mm 200×760 Maximum longitudinal cutting height: mm 300 Cgjdpfowtw Avex Af Dol

Year of construction: 2025, condition: new, machine/vehicle number: SÇ 5000 S ALÜMİNYUM PVC 3 EKSEN CNC FREZE MAKİNESİ, - Conforms to CE standards - It is a machine that can perform door, sash, arm barrel and triple drilling of aluminum and PVC profiles. - CNC control 10" touch screen - 3 independent axes (AXIS) - Cooling system for aluminum profiles - Metering system with right and left arm and rest - Precise operation thanks to linear slide system Cgodpfxjra Nybe Af Del - Ability to adjust the speed settings of all processes - Easy switching from touch screen to Aluminum Pvc profile and automatic change of speed settings - Unlimited memory capacity - Automatic protection cover for safety - Servo motor system in X, Y, Z axener