Parallel tower

POREBA TCC 160

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment incl. milling saddle support Bjdpjzcm Rmsfx Af Holk DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1987, functionality: fully functional, turning diameter: 4,300 mm, faceplate diameter: 4,000 mm, Vertical Turning Lathe SC43 CNC, retrofitted and upgraded with CNC Fanuc 0𝑖-TF Plus Made in Romania by TITAN Year of manufacture: 1987 The machine was completely retrofitted in 2026 Bodpfx Aey A Iifsf Helk Main technical data: FACE PLATE DIA. MM 4000 MAX. SWING MM 4300 MAX HEIGHT UNDER THE CROSSRAIL MM 2000 MAX. LOADING ADMITTED KG 18,000 FACEPLATE SPEED RANGE 1-92 RPM FEEDS RANGE MM/ROT 0.05-5 CARRIAGE RAPID FEEDS MM/MIN 2500 MAIN D.C. MOTOR POWER KW 55 SIEMENS WITH SIEMENS DRIVER MACHINE WEIGHT APPROX. 63 TONS The machine has the following brand new components: - New electrical equipment with parts made by Schneider, Shrack, Siemens, with a new cabinet - New control panel - New micro switches - New hydraulic pump and components - New pump for guideway lubrication, and the entire installation was redone - New CNC Fanuc 0𝑖-TF Plus 55KW Main motor, Siemens, refurbished in 2018 with Siemens driver The main gearbox was checked and refurbished with new bearings. The machine was repainted. We grant a 6-month guarantee for parts. We can send more photos and a video showing the machine’s precision measurements. Do not hesitate to contact us.

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Bsdpfx Afexr Nvcj Helk

Condition: like new (used), Rotary autoclave SURDRY 1 B Blsdpfx Afjxp Rqve Hok

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Bsdpfx Asxcuicjf Holk Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min Blodex Ru Azspfx Af Hsk SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm Blsdpowgnz Aefx Af Hjk workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, Radial drilling machine CSEPEL, Type RFh 75 / 1500 Machine no. 13704, Year of manufacture 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle mount: MK 5 Nominal overhang: 1500 mm Maximum overhang of the spindle: 1500 mm (to the column) Minimum overhang of the spindle: 440 mm (to the column) Distance from spindle nose to clamping surface: 370 - 1700 mm Overarm vertical adjustment: 950 mm Bedpjlhwr Refx Af Hjlk Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed rate: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volts, 50 Hz, 15 kW - Right-hand and left-hand rotation of the drilling spindle via hand lever switch - Hydraulic gear change for spindle speed and feed rate - Hydro-mechanical central clamping device - Motorized overarm vertical adjustment - Without coolant system - Machine light - Operating manual Space required: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons Good condition

Condition: used, color: yellow, first registration: 01/1995, * Manufacturer: HYSTER, * Model: H2.50XM, * Serial number: D177B22181S, * Attachment: S/S 2.00-1.50 1067 mm, * Year of manufacture: 1995, * Drive: Diesel, * Operating hours: 18151.8 h, * Unladen weight: 4265 kg, * Mast tilt: 6 degrees, * Tire size: 7.0 x 12 (front), 6.0 x 9 (rear), * Tire pressure: 0 (front / rear), Blsdoi Tfapopfx Af Hjk * Track width: 1125 mm, * Load capacity with vertical mast and attachment as specified above, * Lifting height: 5550 mm, * Load capacity: 2040 kg at 500 mm, 1860 kg at 600 mm, 1710 kg at 700 mm. Subject to changes, prior sale, and errors.

Condition: excellent (used), With DRO With internal grinding attachement Center height 240 mm Distance between centers 2500 mm Grinding wheel 700 x 200 x 305 Grinding wheel speeds 890 / 1'120 rpm Workpiece spindle head 90° rotation Taper in tailstock MK5 Bsdpfxezhmfyj Af Holk Misc. accessories MARCELS MASCHINEN AG