Center lathe

Poreba TPK - 90A1/6M

Condition: used, functionality: fully functional, turning diameter: 930 mm, turning diameter over bed slide: 650 mm, turning length: 6,000 mm, total width: 8,500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power and can be inspected at any time. Equipment as shown in the photos. Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm Hnedpev Epkkofx Ab Tji total weight: 8000 kg

Condition: used, CNC flame cutting machine BACH type ACW 2500 Hodpof Ncadsfx Ab Toni Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch with cutting table

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR Hodpfxox Dmi De Ab Toni MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: good (used), Technical data: Working length: 2050 mm Max. bending capacity: 18.0 mm Pre-bending: 12.0 mm Top roller diameter: 280 mm Bottom roller diameter: 280 mm Hnsdpsxruvzsfx Ab Toi Conical bending device Hydraulic drop-end bearing Motor power: 7.5 kW Dimensions (length x width x height): approx. 3650 x 1550 x 1650 mm Weight: approx. 7.5 tonnes The seller is not liable for typing or data transmission errors. The machine's condition in appearance, technology, and wear corresponds to its age; used machines are sold without any guarantee.

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm Hodpfx Aoxmvm Rsb Tjni OUTFEED CROSS TRANSFERS T13

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] - Number of spindle hours : 7658 [h] Hodow Tnhbepfx Ab Teni EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. Hnodpfx Asxlza Hob Tji The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Type: ERMS 60-260 Hnsdpfewkttrex Ab Tsi Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: ready for operation (used), Year of construction: 2019, Make: HURCO Type of machine: VMX42i Year of manufacture: 2019 Hedpfx Absyc Sn Ro Toni Control system: Hurco WinMax Tool holder: SK40 x-travel: 1.067 mm y-travel: 610 mm z-travel: 610 mm Speed range: 12.000 U/min max. Table load: 1.000 kg Table dimensions: 1.270 × 610 mm Number of tools in the magazine: 24

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Hodpfew T Ti Djx Ab Tsni Specifications Maximum longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 × 2400 × 1600 mm Weight: 4800 kg Operating hours: — Power-on hours: — Condition: Rebuilt Compliant with local standards: — Status: Under power Technical features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table displacement [mm/rev]: 10 - Table speed range [mm/s]: 0.01–5 - Smallest table stroke [mm]: 3 - Wheelhead swivel [°]: ±90 - Centre sleeve taper [Morse No.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32–500 - Grinding wheel drive motor power [kW]: 5.5 - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Machine dimensions [mm]: L=5400 / W=2400 / H=1580 / Machine weight [kg]: 4800