Poreba TPK 90/5M

Poreba TPK 90/5M

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm Dedpjfxgrdsfx Abhski - Rollers: PUR wheels - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm - turning speed: 0 - 2,000 mm/min - Operation: hand remote control and foot switch

Condition: new, table diameter 780 mm table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min Dedpfx Abofv Ay Sohjki table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment Dsdpjx D Iixsfx Abheki • Powered (live) tool holders • Various tool holders • Liners

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Dkedst Hfrcspfx Abhsi Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 100 mm, total height: 2,080 mm, overall weight: 8,500 kg, product length (max.): 3,650 mm, number of axes: 4, This 4-axis Hyundai WIA LM 1800 TTSY was manufactured in 2025, featuring a maximum turning diameter of Ø230 mm and length of 673 mm. It boasts a spindle speed of up to 5,000 rpm and a bar capacity of Ø65 mm. The machine includes a built-in motor spindle, dual 12-tool turrets, and rapid traverse rates ensuring efficient operations. Ideal for complex turning tasks. Contact us for more information about this machine. • Packaging: Original packaging • Capacity: • Swing over carriage: Ø290 mm • Max. turning diameter: Ø230 mm • Max. turning length: 673 mm • Bar capacity (1st/2nd): Ø65 mm • Chuck size (1st/2nd): Ø210 mm • Spindle: • Spindle bore (1st/2nd): Ø76 mm • Motor (Max/Cont.) (1st/2nd): 22/11 kW (30/15 HP) • Torque (Max/Cont.) (1st/2nd): 358/214 Nm (264/158 lbf ft) • Spindle type: Built-in motor • Spindle nose: A2-6 • C-axis indexing (1st/2nd): 0.001° • Feed / Axes: • Travels (X1/X2): 165/195 mm • Travels (Z1/Z2): 700/720 mm • Travel (ZB): 668 mm Dkodpfx Asycvzbobhsi • Rapid (X1/X2): 20/20 m/min (787/787 ipm) • Rapid (Z1/Z2): 40/40 m/min (1,575/1,575 ipm) • Rapid (Y): 7.5 m/min (295 ipm) • Rapid (ZB): 40 m/min (1,575 ipm) • Slide type (X/Y): Box guide • Slide type (Z): LM guide • Turret: • No. of tools: 2 × 12 (24) • Tool size (OD): Ø20 mm • Tool size (ID): Ø32 mm • Indexing time: 0.15 sec • Y-axis type: Wedge type • Live tool: • Milling tool speed: 5,000 rpm • Motor (Max/Cont.): 5.5/1.1 kW (7.4/1.5 HP) • Torque (Max/Cont.): 47/14 Nm (34/10 lbf ft) • Collet size: ER25 • Type: BMT55 • Tank capacity: • Coolant tank: 300 L (79.3 gal) • Lubricating tank: 4 L (1.06 gal) • Power supply: • Electric power: 60 kVA • Power cable thickness: Over 50 mm² • Voltage: 220/60 (200/50) • NC / Controller: FANUC 31i-B Plus / SIEMENS 840D