Carriage

Rehnen Masterflex LT

Condition: new, Technical data: Hodpfx Abog A D Aneronh Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Hodpfx Aor Iyvbebronh Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm Hnjdpfx Abeuyky Torsh - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm Hnsdpfeumvmksx Abroh - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: new, weight max. in kg 2000 kg fork length 1800 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm number of wheels 4 vorne, 2hinten tire equipment PU/PU fork arm (length x width x thickness) 1800 x 155 x 50 mm Hnedpfxsfgyhpe Abrsh weight of the machine ca. 0,088 t dimensions 2,15 x 0,54 x 1,20 m SPECIAL PRICE !!! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: efficient: - Turbo system: 25% higher system performance thanks to state-of-the-art application technology, all with the same space requirements! - Reduced throughput times due to optimized program automation for fast UV systems - Up to 70% cost savings compared to casting and spraying, thanks to the use of solvent-free systems and single-operator control Hnjdpfx Aowka Hljbrsh flexible: - Cost-effective single-operator operation with return function or, alternatively, continuous operation for two-person operation - Expandable: The system can be upgraded with additional roller, smoothing, or sanding units ergonomic: - Simple operation thanks to ergonomic controls service-friendly: - Cleaning cycle and quick-change system process-safe: - Top-quality surfaces, precisely reproducible Included: - Roller conveyor, 2000 mm long - ELX 1400 roller conveyor - Bar conveyor, 3000 mm long - UV drying tunnel, 1 lamp 60/80/120 W Working height: 850 - 950 mm Application roller, rubberized: D=238 mm Dosing roller, chrome-plated: D=174 mm Passage height: 3–120 mm UV lamp module: 80/120 W mercury Connected load: approx. 21 kW Dimensions: 1300 x 3080 mm Availability: short notice Location: Röllbach

Year of construction: 2004, condition: refurbished (used), 2004 Double squaring machine, Friulmac brand, Idramat model Hsdpjpfp Ezofx Abrsnh Note: see [VIDEO](?share=copy#t=0)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Top sanding and calibrating machine (fine finishing). Also suitable for sanding assembled window frames (semi-open side). Machine with fixed table and height-adjustable sanding unit. • One sanding unit type C (combination unit with roller and mechanically adjustable pad) • Rubber roller diameter 160 mm, 90 Sh • Sanding belt length 1900 mm • 1 straight and 1 beveled pad • Fixed table height, motorized height adjustment of sanding unit (max. sanding thickness 200 mm) • Automatic star-delta starter • Ammeter for sanding unit motor • Infrared sanding belt oscillation • Electronic digital thickness setting display • 2 feed speeds: 4.5 / 9 m/min Hnsdpfx Asya H E Eobreh • Rubber pressure rollers • Pneumatic brake on main motor • Pneumatic tensioning of sanding belt • Soundproof protection

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Hsdpfx Abeyaiaferonh Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. (The YouTube video serves only as an example video of a similar system configuration!)

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt Hodpfx Aboumvkcsrjnh - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50