2001 Rotox KF 348

Rotox KF 348

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Podpfxsv Dvkzo Agzorf Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, Machining center with 4 CNC controlled axes for machining profiles made of aluminum, PVC, and steel Machine frame in stable welded construction, stress-relieved annealed, with hardened rail guides Protective cabin over the entire machining length Pneumatically opening safety door Milling spindle: 3.8/4.6 KW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with tool holder ISO 30 with minimum quantity cyclic spraying for tools with fill level monitoring Tool magazine: 5 positions, on the left side of the machine bed, for holding drilling, milling, and thread cutting tools, angle head, disc milling cutter up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: One pneumatic reference stop each on the left and right of the A-axis Travel paths: X - Axis 3500mm Y - Axis 370mm Z - Axis 348mm A - Axis ±90° Travel speeds: X - Axis 70m/min. Y - Axis 30m/min. Z - Axis 30m/min. A - Axis 60°/sec Max. working areas: X - Axis 3270mm Y - Axis 250mm at 0° 116mm at ±90° of the A-axis Z - Axis:170mm at 0° 200mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining by swiveling the A axis 90°-0°-90° Face machining using a disc cutter Podpfxjwrcwpj Agzorf Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivery without power cable Pneumatic: pressure 6 - 8 bar Dimensions and weight: Length: 5800mm Width: 1640 mm Height: 2000mm Weight: 2000 kg incl.: graphical programming software CM3D/CAD3D barcode reader additional network connection incl. remote maintenance/diagnosis for 1 year

Year of construction: 2012, condition: excellent (used), Double-head saw with 3 controlled axes for aluminium, PVC, and light alloys, featuring automatic movement of the mobile head and electronic management of all angles from 45° (internal) to 15° (external), with precision up to 280 positions per degree. Podpfx Agexqdu Dozjrf

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch Pjdpfx Asw Tfybogzjrf - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg Prsdpfx Asghl Emogzsf

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Pjdjxdl U Espfx Agzjrf

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw Prjdpot Rp Hxofx Agzef 3 feed speeds CE certificate

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Psdov Dvfrepfx Agzsrf Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 2009, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. CNC, Metalurgia y Fabricación Prjdpstvrc Sofx Agzof Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg Viewing possible

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor Pjdjp H Sv Depfx Agzerf 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below