Cnc multispindle lathe

SCHÜTTE SC9-26

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Fedjw T Tlrjpfx Am Eegi Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Fedpfx Aswv Hnmjm Eegi Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1987, Technical details: Fjdpfx Amemf Aw Ao Ejgi number of spindles: 8

Condition: like new (used), Year of construction: 2021, operating hours: 3,573 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 480 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, swing diameter over cross slide: 300 mm, turning diameter over bed slide: 430 mm, type of input current: three-phase, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E45 (Year 2021) CNC turning machine with FANUC 0i-TF, 3,573 hours, like new! Includes parts collection device for removal of finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of construction: 2021 • Serial number: S4E213351 • Control system: FANUC 0i-TF incl. manual operation wheel • Operating hours: 3,573 h • Power-on hours: 14,792 h (control system ON) • Machine type: Single-spindle with parts collection device • Number of tool positions: 12-position VDI-30 axial turret with two pitch circles • Number of axes: 2 (X/Z) • Condition: like new, fully functional (Inspected by EMCO technician on 09.11.2026! - Inspection report will be provided upon request) • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: More pictures and videos of the operating machine will be provided upon request. _____ Item description For sale is a high-precision CNC turning center EMCO EMCOTURN E45 from the year 2021 with low operating hours of only 3,573 hours, in very good condition. Special features: • Control system: Modern FANUC 0i-TF control system for easy programming, including manual wheel • Parts collection device: The parts collection device (parts catcher) of the Emco Emcoturn E45 gently removes finished workpieces from the working area and automatically deposits them into a finished parts container. • Powerful main drive: Single-spindle configuration with 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • High-quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical data: Working area and travel ranges: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Cross slide travel ranges (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power main spindle: 13 kW • Torque on the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two pitch circles • Arbor according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drilling bars: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse speed (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm Fgodpfx Ajzkhuhjm Esi _____ Scope of delivery & terms of sale: • CNC turning machine EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included • FANUC operating manuals and machine documentation • Loading with a forklift on site is included. The machine is immediately available and can be inspected and tested under power after prior appointment. Subject to prior sale and errors.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] Fodpfx Aexur E Sjm Eegi - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons Fgodpfsw U A Rmex Am Eei The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: good (used), Parts shown by hand not come. Technical details shown on picture. Tools in wooden box will come with machine. Fgjdpfewb Eptex Am Eei

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Max. bar diameter : 32 [mm] - Spindle speed : 6300 [rpm] - slide unity 1.1 : X and Z axes controlled by CNC - slide unity 1.2 : X and Z axes controlled by CNC - slide unity 2.1 : X and Z axes controlled by CNC - slide unity 2.2 : X and Z axes controlled by CNC - slide unity 3.1 : X and Z axes controlled by CNC - slide unity 3.2 : X and Z axes controlled by CNC - slide unity 4.1 : X and Z axes controlled by CNC - slide unity 4.2 : X and Z axes controlled by CNC - slide unity 5.1 : X and Z axes controlled by CNC - slide unity 5.2 : X and Z axes controlled by CNC - slide unity 6.1 : X and Z axes controlled by CNC - slide unity 6.2 : X and Z axes controlled by CNC - synchronous unit, spindle position 6.1 EQUIPMENT - CN SIEMENS 840D - Counter spindle - Polygonal milling device : 5.1 carriage unit Fodpsuhatpsfx Am Eogi - Bar loader : IEMCA SIR MS32/33 P - coolant tank KNOLL * with high-pressure pump - chip conveyor KNOLL - Cooling unit - Parts catcher - Ejection of workpiece - Fire extinguisher : KRAFT UND BAUER * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. Fgodpfsx D Iuzjx Am Eei • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: excellent (used), Working travels 700 x 420 x 610 mm Table size 1260 x 490 mm Spindle taper HSK E50 Spindle speeds 50-36'000 U/min Tool changer 42 Pos. Fjdpfx Amsxpud He Eegi Control HEIDENHAIN iTNC 530 3D measuring tracer Tool breakage control Tool length and diameter measuring device MARCELS MASCHINEN CH