Other accessories for machine tools

SCHUETTE

Condition: used, Year of construction: 2002, SCHÜTTE SG 18 Max. bar diameter round / square: 18 / 13 mm Spindle pitch circle diameter: 180 mm Bar feed: 80 mm Ljdpfoymdd Sex Ab Torh Longitudinal slide travel (total / working): 63 / 50 mm Cross slide travel (total / working): 32 / 20 mm Spindle speeds (stepless): 800 – 10,000 rpm Main times (stepless): min. / max. 0.24 – 45 s Secondary times: 0.30 s Main drive: 11 kW Feed motor torque: 18 Nm Dimensions (incl. bar guide): approx. L x W 5.5 x 1.3 m Weight: approx. 5 t Voltage: 400 V / 50 Hz Operating hours: 14,304 h Scope of delivery: Bar feeder Pra 52 P IEMCA RUEZ KF0WW2/312 DAS, year 2002

Condition: used, Year of construction: 2017, machine/vehicle number: XD-38II-CN-0491-N, Special feature: The machine is equipped with a hydraulic 3-jaw chuck on both the main and pick-up spindles. The machine can be inspected at our premises. MAIN SPINDLE Maximum turning diameter: 25 mm Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) C-axis with 0.001° Stroke Z1 [mm]: Long lathe version 142 mm, Short lathe version 80 mm Synchronous guide bush unit Type of guide bush: SL38 Type of collet chuck: 173E COUNTER SPINDLE Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) Maximum pick-up diameter [mm]: 25 Max. part length ejection to the front [mm]: 90 C-axis with 0.001° stroke Z2 [mm]: 280 Type of collet chuck: 171E / 173 E TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 5 external turning tools 16 x 16 mm Cross drilling/milling device: - Quantity: 5 driven ER16 drilling/milling spindles - Power: [kW]: 2.1 (S6000) - Front drilling unit for 5 drilling quills diameter 32 mm Rear machining - Tool carrier for 4 (optionally 6) tools - 2 - 4 driven drilling/milling spindles ER16 modular - 2 - 4 stationary drilling/milling spindles ER16 modular Optional Y2 axis - 4 - 5 driven drilling/milling spindles ER16 modular - 3 - 4 stationary drilling/milling spindles ER16 modular TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32 m/min (Z1,Z2,Y,X2, Y2) ; 24 m/min (X1) Connected load [kW]: 35 CONTROL Control type: Siemens 828 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Lrsdpfx Absrvzdms Tjh Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function ACCESSORIES Alignment shoes with leveling elements Tool box and service tool set LED work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English

Condition: repair required (used), 3x SCHÜTTE SF40 offered as a package at a low price – machines require overhaul Lredpfoylhp Njx Ab Toh

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: PE-305L-1307, 30A 5-axis Siemens Sinumerik control cabinet 2008 GEA Multitron Junior air extraction system 2008 Volmat FA-120S filtration system with cooling Motoman MX100 robotic arm with control cabinet 400V The robotic arm is not operational. Lrodpfx Ajyl Iq Hob Tsh The machine is in good condition and has always been used without the robot. The robotic arm has never been put into operation and is currently not functioning. All parts and assemblies are separated; the machine has been completely dismantled and is therefore easy to transport.

Condition: good (used), Multi-spindle lathe (6 spindles) max. bar diameter 16 mm Ljdpfx Abjp Dux Tj Torh guide tubes 4,000 mm chip conveyor

Condition: repair required (used), Year of construction: 1987, functionality: not functional, Control unit defective. Spindle is mechanically okay and runs smoothly. Free loading. Ledpfeyiuaisx Ab Tjrh

Condition: excellent (used), Year of construction: 2013, operating hours: 1,169 h, functionality: fully functional, Ladies and Gentlemen, We offer you a very well equipped Schütte grinding machine. Please refer to the technical data sheet for a technical description. Lrjdpova Dumofx Ab Teh

Condition: good (used), Year of construction: 1991, Lifting tipper, forklift tipping container, tipping container, tipping trough, forklift trough, -Body: made of stainless steel -Manufacturer BAADER Type 531 -Tilt height: 2500 mm (can be changed for an extra charge) Lrjdpefx T Hfefx Ab Tjh -Max. tine width: 740 mm -Chain hoist: Demag, year of manufacture 2007 -Dimensions: 3800/890/H1060 mm -Weight: 326 kg -without documentation

Year of construction: 2005, condition: excellent (used), Multispindle lathe Schütte SF26S DNT Lodpfxjg Ezv Hs Ab Tsrh

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Ledpfx Absg S Tx Is Torh

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, measuring range Y-axis: 615 mm, table width: 1,200 mm, table length: 800 mm, Height gauge TESA Micro-Hite M-600 Range: 0 to 615mm Graphite table C.E.Johansson DIABASE (Made in Sweden) - Year: 1988 - Measurements: 1200x800 - Grade: B Lodpfx Asqy H A Dob Torh - Tolerance: 22 um Sale of the set.

Year of construction: 2001, condition: excellent (used), Multispindle lathe Schütte AG20 Lrjdpfohrihyox Ab Tsh

Year of construction: 1999, condition: ready for operation (used), A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible. Lsdpsx Aup Nofx Ab Torh

Condition: excellent (used), Multispindle lathe GILDEMEISTER GM 35 with spindle stop n°4901/0067 with bar loader Giovanni DMB36 year 1999 n°DBM99294 - Hydraulic pick-up - Back burring slide - 5 front spindles - 4 long turning slides pos.1, 2, 4, 5 - Part catcher - End of bar catcher Ledpfoix I Dgex Ab Torh - Swarf conveyor - Part belt conveyor

Condition: good (used), Year of construction: 1980, Pick-off devices for backworking on automatic lathes Schütte - Pittler 1X for up to 36 mm 1 X for up to 42 mm 1X for up to 50 mm 1X shaping head Ljdpetthkdjfx Ab Torh Complete with base plate and drive shaft .