Band saws SCM 2017

SCM

Condition: repair required (used), Year of construction: 2014, machine/vehicle number: AA2/002546, number of slots in tool magazine: 24, overall weight: 6,600 kg, table length: 5,200 mm, table width: 1,300 mm, TECHNICAL DETAILS Table length: 5,200 mm Table width: 1,300 mm Number of milling spindles: 1 Type of milling table: Beam table Dodpjy Nybtofx Anwscg Tool changer positions: 24 MACHINE DETAILS Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Net weight: 6,600 kg Transport packages: 1 EQUIPMENT Drilling tool Vacuum pump Tools Becker Vtlf 250 vacuum pump: - Year of manufacture: 2008 - Main motor power: 5.5 kW - Connection diameter: 70 mm - Oil-free: Yes Note: The machine requires repair. There is an issue with the CAN bus system.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Wemhöner VARIOPRESS Vacuum Membrane Press Basic 1000 S Technical Specifications: Heating platen size (mm): 2850 x 1550 Electric heating platen design: Aluminum, top heating platen Total pressing force (kN): 2400 Max. chamber pressure (bar): 6 Max. operating temperature: 180 degrees Celsius Dcedpfxjv Np H Hj Anweg Max. batch or workpiece size (mm): approx. 2460 x 1180 Thermoplastic film in roll form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Pressure chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AHH/157/00, functionality: fully functional, total length: 12,500 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit type: Pre-milling unit 2. Unit type: Glue application unit 3. Unit type: Pressure rollers 4. Unit type: End trimming unit 5. Unit type: Rough milling unit 6. Unit type: Corner rounding unit 7. Unit type: Radius scraping unit 8. Unit type: Flat scraping unit 9. Unit type: Brushing unit MACHINE DETAILS Voltage: 400 V Dcjdpsy Nxrdofx Anwsg Current consumption: 36 A Fuse: 63 A Power: 14.4 kW Dimensions & Weight Dimensions (L x W x H): 12,500 x 2,400 x 1,900 mm Weight: 4,000 kg EQUIPMENT Tools CE marking

Condition: excellent (used), Catalogue number 6368 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) bottom horizontal, 230 mm, 5.5 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) top horizontal, 230 mm, 7.5 kW 5) top horizontal, 230 mm, 11 kW 6) bottom horizontal, 230 mm, 18.5 kW 7) universal, 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, right/left - all spindles equipped with electric brake - spindle diameter: 40 mm - spindles 4 and 5 adjustable electrically up/down - top: 8 metal feed rollers, twisted, including 2 double rollers - top: 4 rubber outfeed rollers - top: 2 hold-downs - bottom: pawls - bottom side: 3 hold-downs - bottom: 2 smooth metal feed rollers - bottom: 2 double rubber feed rollers - rollers pneumatically loaded - feed via Kardana shafts - stepless feed speed adjustment 5–36 m/min - feed motor 4 kW - electric thickness adjustment 0.75 kW - infeed table length: 1980 mm - fully enclosed in soundproof cabin - central lubrication for the table - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L/W/H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture Dcedpfey N Agxsx Anwjg – 7-head configuration – suitable for wet and dry wood – universal final spindle – unpainted – used four-side planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR, depending on exchange rate 4.2 EUR (Prices may vary in case of higher fluctuations)

Condition: new, width of the strips 300 mm band length 2070 mm Dodpfx Aoxaapionwscg band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. Dsdpjd Supgefx Anwocg PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. Dsdpfsdd Hi Ejx Anwjcg hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), SURFACE PLANER model SCM MINIMAX F1 second hand machine in Excellent working conditions CE regulation: YES instruction booklet and CE certification: YES security protection working width mm. 410 tables length mm. 2610 n.4 knives "Tersa" tilting guide up to 45° motor power Hp 5,5 volt. 380/50 Dcjdpfxon Dw N Ds Anwog OTHER Surface Planer machines available as in photos

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Dcjdper A Eq Rsfx Anwsg Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Dcodpeiknp Rjfx Anwog Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Year of construction: 2022, condition: new, Angle: 0° - 90° Dcodpfx Anoi Ezr Njwjg Maximum cutting length: 1370 mm

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Djdpfx Anjd Etkhewjcg • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Work table adjustment in the infeed by means of parallelogram system Display for chip removal via degree scale Simultaneous height adjustment and locking of the work tables complete with anti-tilt device Quick changeover system for changing from dressing to thicknessing operations (CE version) by means of a special support for the opening of the dressing tables and an automatic pneumatic positioning system of the suction hood, with hydraulic assistance. "READY" electronic control includes: - Thicknessing table adjustment - Manual, semi-automatic and automatic mode with 99 storable working programs. - Additional functions: Calculator and hour meter Automatic star delta start for main engine Machine table with height adjustment via 4 steel threaded spindles Rubber-coated feed roller at the outlet Exchangeable feed rollers Link pressure shoes in the infeed Planing shaft and setting gauge for planing knives Dcjdod Akyzjpfx Anwog Micro protection switch for correct positioning of the dressing tables and extraction hoods Dressing hood (CE version) Automatic motor brake on main motor Thermal protection switch Emergency stop switch Lockable main switch CE Declaration of Conformity Technical data [mm Usable working width [mm] 520 Total table length [mm] 2310 Blade shaft diameter [mm] 120 Motor power [kW] 9.0 Hz 50, 400 V Planer shaft speed [rpm] 5000 4 knives [mm] 35 x 3 x 520 Aluminium planing fence [mm] 1200 x 190 Planing fence inclination from 90° to -45 Min./ma

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER Dedpfxou U Hgie Anwjcg PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: new, both working tables open at the same time! working width 410 mm cutter block DM 95 mm knife dimensions 410 x 30 x 3 max. chip removal 5 mm working table length 2200 mm thicknesses table dim. 410 x 775 mm feed speed 6/12 m/ min min. ÷ max. work piece height 3 ÷ 240 mm Motorleistung 5,0 kW, 400V, 50 Hz incl. options: "Tersa”-cuter block Ø 95 mm, with 4 pcs knifes auxiliary fence for small work pieces electric height adjustment for thicknessing table with digital readout Dcjdpedvn Hwjfx Anwjg