Pillar drill

Serrmac TCO 40L

Year of construction: 2022, condition: new, Manipulator with two height-adjustable outriggers and a turntable. Load capacity: 1,500 kg Stroke: 800 mm Iisdjfnku Hepfx Abvog Swivel range: 300° Turntable diameter: 1,000 mm Welding current: 600 A

Condition: used, Year of construction: 2008, Technical details: batch weight: - total volume: 600 l external diameter: 1716 mm Effective volume: 345 l Work tank width: 1616 mm max. workpiece size: 270 mm revolution per minute: 980 - 1460 U/min total power requirement: 6 kW weight of the machine ca.: 1600 kg dimension machine approx.LxWxH: 2,4 x 1,7 x 1,44 m height: 3,42 m This machine was never operated with abrasive grinding media and therefore shows very little wear. The polyurethane lining is in excellent condition. The Walther Trowal CB 600 offered for sale was used exclusively for the treatment of stamped metal parts. Iiedpfxezdnlae Abvjg The parts were processed in a dry finishing process using corn cob granulate, whereby they were conveyed through the media. The purpose of this process was to condition the surface of the stamped parts in such a way that sticking together during subsequent stacking was reliably prevented. The machine was used exclusively for this application and operated only in dry mode with corn cob media. Walther Trowal CB 600 The Walther Trowal CB 600 is an industrial circular vibratory finishing machine with a gross capacity of 600 liters. Suitable for: ·Deburring ·Edge radiusing ·Grinding ·Surface smoothing ·Polishing ·Descaling ·Cleaning metal parts Typical workpieces: ·Turned parts ·Milled parts ·Stamped parts ·Cast parts ·Forged parts ·Gears Machine can be demonstrated under power. i.D. *

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 Iodpfx Abju Tyvhjvsig -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer. Isdpfx Abjx H Aa Tsveig

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR Isdera Aghopfx Abveig

Year of construction: 2025, condition: new, Transport trailer Payload: 6000 kg Length: 4000 mm Width: 1600 mm Height: 540 mm Turntable steering Fixed trailing axle Wooden floor: 27 mm Reinforced band tires 415 x 100 with steel rims Ijdpfx Ajhwna Asbveig Paint finish: RAL 2000 Drawbar with 40 mm eye and safety lock

Year of construction: 2017, condition: ready for operation (used), A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible. Iodpozkldtefx Abveig

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Iiodpfsgtty Tjx Abveg Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed Ijdpfx Aezcv Egebvsig

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Iodpfx Ajx D Iuuobvjig Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Application Types Milling