CNC lathe

SMTCL CAK80285D

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Fsdpfxeyaywhs Am Ejpp Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Base holder - 3-jaw chuck - Various PARAT tool holders With original operating manual Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee Fsdjxlz Rxopfx Am Espp

Condition: used, Year of construction: 2007, greates pass round over bed 650 mm Swing dia. over traverse guideway 420 mm Distance between centres 2.000 mm control Sinumerik Siemens slide travel X-axis 440 mm slide travel Z-axis 2.000 mm turning speed range - main spindle 1 - 3.000 min/-1 power capacity - main spindel 33 / 27 / 22 kW transmission ratio 2 spindle diameter in front bearing 140 mm spindle bore 106 mm standard chuck diameter 250 - 400 mm spindle head DIN 55026 / A8 turret head 12 pos. turning tool - shaft cross cut 32 x 32 mm rapid traverse X: 5 m/min rapid traverse Z: 10 m/min feed range X: 0,001 - 1.000 mm/min feed range Z: 0,001 - 2.000 mm/min power feed coss 9.000 N power feed longitudinal 12.000 N diameter of quill 100 mm quill travel 200 mm taper of center MK 6 total power requirement 38 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,0 x 2,5 x 2,0 m CNC - Lathe DMT KERN - CD 650 / 2000 - only 3,446 operating hours - incl. boring bar with holder for cross slide - incl. face plate 600 mm - incl. traveling steady rest max. 160 mm - incl. fixed steady rest max. 160 mm - incl. fixed steady rest max. 250 mm (not pictured) - incl. fixed steady rest max. 350 mm (not pictured) Fpsdpfx Ajzp Rvlsm Ejp - incl. spare parts package - NO additional tools included

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide Fpsdpfozb Ipzjx Am Esp X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 2008, turning length: 3,000 mm, spindle bore: 155 mm, spindle motor power: 51,000 W, total height: 3,200 mm, total length: 9,500 mm, total width: 3,200 mm, turning diameter over bed slide: 1,420 mm, workpiece weight (max.): 5,000 kg, overall weight: 16,000 kg, Make: Krewema Type: HFDM 55 Control: SIEMENS 840D YOP: 2008 4 chuck 1600 mm 4 chuck   900 mm 3 chuck   630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Axial live tool holder Chip conveyor double  Internal coolant tool holder Swing over bed Ø: 1420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2050mm DBC Turning Length: 3000/4000mm Gap length: 1000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Fjdpfxsz R Rdmj Am Espp Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Workpiece weight: 5000 Speeds / ranges: 1200Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 6000mm/min. Length: 9500mm Width: 3200mm Height: 3200mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fpedozrnkrepfx Am Eop Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 105 mm, turning length: 1,500 mm, turning diameter over bed slide: 600 mm, swing diameter over cross slide: 365 mm, quill diameter: 68 mm, spindle speed (max.): 2,200 rpm, feed rate X-axis: 10 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 310 mm, travel distance Z-axis: 1,500 mm, spindle diameter: 250 mm, workpiece diameter between centers: 365 mm, distance between centers: 1,500 mm, CNC ECS 2400 Center height above the bed: 300 mm Spindle nose: CAM LOCK 8" Spindle bore diameter: 105 mm Spindle motor power – S1/S6: 9/13 kW Spindle speed ranges: 2 with automatic change Maximum spindle speed: 2200 rpm Spindle speed at constant power: 75/2200 rpm Fsdpsz Ig T Isfx Am Ejpp Spindle speed at constant power (I range): 10 + 75/430 rpm Spindle speed at constant power (II range): 40 + 380/2200 rpm Maximum spindle torque: 1650 Nm Maximum diameter on the bed: 600 mm Maximum diameter on the carriage: 365 mm Nominal distance between centers: 1,500 mm Controlled travel of axis "X": 310 mm Controlled travel of axis "Z": 1,500 mm Rapid traverse rate of axis "X": 10,000 mm/min Rapid traverse rate of axis "Z": 12,000 mm/min Continuous feed force of axis "X": 300 daN Continuous feed force of axis "Z": 1000 daN Tailstock bore diameter: 68 mm Tailstock travel: 220 mm Axial thrust of the tailstock: 1,200 daN Supply voltage: 400 V (50 Hz) Total installed power: 20 kW Machine complete with: • Self-centering chuck, Pinto, diameter 250, 3+3 jaws • Electric tool turret, 8 positions • Fixed steady rest • Operation and maintenance manuals • CE declaration of conformity

Condition: good (used), Used lathe from TOS In excellent condition, used in a one-man operation Type: SV 18 RA Turning diameter over the bed: 380 mm Turning length: 1000 mm Fode Aiqpkopfx Am Eopp Spindle bore: 31 mm 2-axis digital readout Includes 3-jaw and 4-jaw chucks Includes tool holder