2014 Spinner TC800-110MCY

Spinner TC800-110MCY

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min Fpodpfx Ajyv Epvsm Eop • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Fpsdox Tvkxepfx Am Eop

Condition: ready for operation (used), Year of construction: 2016, operating hours: 19,460 h, travel distance X-axis: 360 mm, travel distance Z-axis: 900 mm, number of axes: 4, This 4-axis SPINNER TC800 110MCY was manufactured in 2016. It features a Siemens control system, operating at a voltage of 400 V and a frequency of 50/60 Hz. The machine has a full-load current of 63 A and a nominal current of 80 A. If you are looking to get high-quality turn-milling capabilities, consider the SPINNER TC800 110MCY machine we have for sale. Contact us for further details. - Voltage: 3/PE ~400 V - Frequency: 50/60 Hz - Full-Load Current (Ib): 63 A - Nominal Current (In): 80 A - Spindle bore: 110 mm (ideal for heavy-duty bar machining) - Main spindle taper: A11 - Control system: Siemens 840D - Turret & Milling (MC): Tool turret with powered tools & full-fledged C-axis - Y-axis: Mechanical Y-axis (travel: 120 mm / ±60 mm) - Tailstock: Fitted (MK4 quill) - Chip management: Chip conveyor fitted - Tool measurement: Fitted (manual measuring arm) Fjdpfxez Hwflo Am Eopp Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Fsdpfx Amjzguums Eepp Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 2007, Manufacturer: Volz BMT Year of manufacture: 2007 Control: conventional with digital readout (DRO) Country of origin: Taiwan Swing diameter: 660 mm Max. turning length: 2000 mm Spindle bore: 85 mm Spindle mount: D1-8 Fjdpfx Amex Uw S Hs Espp Spindle motor: 7.5 kW Spindle speed: 17–1200 rpm with steady rest with digital readout (DRO) with thread cutting function

Condition: used, Year of construction: 2015, CMZ TX 66 Y2 Quattro Year 2015 Fanuc 31i control Maximum turning diameter (mm): 255 Distance between spindle centers (mm): 639 Maximum speed (rpm): 4000 Maximum bar diameter: 66 mm X-axis: 190 mm Y-axis: +- 40 mm Z-axis: 500 mm Chuck: 210 mm 2 BMT 55 tool heads 2 spindles 2 Y-axes Fedszp Ituepfx Am Eepp Spindle bore: 66 mm Tool probe Chip conveyor Tooling included Documentation

Condition: good (used), Year of construction: 2011, operating hours: 19,000 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 19,000 h, spindle nose: HSK 63, number of slots in tool magazine: 32, Equipment: chip conveyor, documentation/manual, The machine will be available starting October 2026! Fedpfxezx Ur No Am Eopp

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Fjdszg Iqnepfx Am Espp

Condition: excellent (used), Year of construction: 2016, operating hours: 3,300 h, functionality: fully functional, Manufacturer: DMG MORI Model: ecoMill 70 Year of manufacture: 2016 Fsdpjz S Uyrsfx Am Espp Control system: Siemens Machining: 3+2 axes Internal cooling (IKZ): available Spindle hours: approx. 3,300 h X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm Machining: 3+2-axis positioning B-axis: -10° to +95° C-axis: 360° Rapid traverse X/Y/Z: 24 m/min Max. feed rate: 24,000 mm/min The machine is in very good condition.

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,400 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,400 kg, total height: 2,492 mm, total length: 4,367 mm, total width: 3,070 mm, table length: 1,500 mm, table width: 650 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Fedjrg Htpepfx Am Espp Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Coolant gun Fairing bottom washing system 390 liter refrigerant collection tank Automatic power-off system Alarm light & work light