CNC turning and milling center

Takisawa TM-2000Y2

Year of construction: 2018, condition: ready for operation (used), A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible. Crsdpeu Dm Izjfx Ab Usa

Condition: used, Year of construction: 2023, controller manufacturer: Mazak, controller model: Mazatrol SmoothAi, _____ Description: Year of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mm Turning length : 850 mm In General: Year of manufacture:2023 Control system:Mazak Mazatrol SmoothAi Max. machining diameter:600 mm Max. machining length:850 mm Main spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Chuck:3-jaw chuck Clamping cylinder:Hollow clamping cylinder Sub spindle: Technology:Motor spindle Speed:6,000 rpm Power:11 kW Max. torque:184 Nm Bar capacity:51 mm C-axis:0.0001° Tailstock function:Yes Tool carrier (X/Y/ZB): Technology:Travelling column with milling spindle X-axis:535 mm Y-axis:210 mm Z-axis:900 mm B-axis:-30° / +210° Milling spindle speed:20,000 rpm Power:24 kW Tool magazin: Technology:Shelf magazine Number of stations:250 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 15 bar Workpiece measurement:Renishaw RMP 60 Tool measurement:Renishaw tool setter Bar loader:IRCO ILS-MUK 7012 Finished part removal:Parts catcher Software option I:5-axis simultaneous machining Software option II:Synchronous thread cutting Codpfeyrvzmjx Ab Ujra Software option III:Cylinder interpolation Software option IV:Tool radius compensation Software option V:Tool length compensation Emulsion mist separator:Mechanical Setup mode:Electronical handwheel

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: FANUC, controller model: F0i-F, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis DOOSAN DNM 6700 vertical machining center was manufactured in 2017. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this DOOSAN DNM 6700 vertical machining center. Contact us for more information. Additional equipment • Spindle Cooler: Included • Preparation for 4th Axis: Pneumatic Clamping Line • Torque Monitoring: Tool Monitoring Systems Machine Benefits Technical Machine Benefits • Coolant pump medium pressure type 1: 19 bar, 1. 5 kw, 18 l/min Cedpfx Aex D Sqtsb Ujra • Cyclone filter: 25 um • Hinged belt conveyor: ejection left or right side • Oil separator: belt type Extra Information Machine still under power Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Codpfx Aowwv Ifsb Uera Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm Crsdpfxet Hw N Hs Ab Usa grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm Crsdpst Hw Najfx Ab Uja total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2018, mazak j-200s technical dataFor this search query, no AI-generated overview is availableCurrently, an AI-generated overview cannot be provided. Please try again later.AI overview +6 The Mazak INTEGREX j-200S is a compact 5-axis multitasking machine with sub-spindle (S) for complex turning and milling operations. Key features include an 8-inch main chuck, a maximum machining diameter of {\(\emptyset 500\text{\ mm}\)}, and a machining length of up to {\(910\text{\ mm}\)}. The B-axis offers a swivel range from {\(-30^{\circ }\)} to {\(+190^{\circ }\)}. Main technical data (Integrex j-200S): Machining capacity:Max. swing diameter: {\(530\text{\ mm}\)}Max. machining diameter: {\(\emptyset 500\text{\ mm}\)}Max. machining length: {\(910\text{\ mm}\)}Main spindle & sub-spindle:Chuck size (main & sub-spindle): 8 inchesMain spindle speed: {\(5,000\text{\ min}^{-1}\)}Main spindle power (40% duty cycle): {\(18.5\text{\ kW}\)}Milling spindle (B-axis):Speed: {\(12,000\text{\ min}^{-1}\)} (typical for the j-series, may vary with optional configurations)Swivel range: {\(-30^{\circ }\)} to {\(+190^{\circ }\)} (or a total range of 220°)Tool interface: KM63 or CAPTO C6Axes & capacity:Y-axis travel: {\(200\text{\ mm}\)} ({\(\pm 100\text{\ mm}\)})X/Z axes: {\(450\text{\ mm}\)} / {\(1119\text{\ mm}\)}Tool magazine: 20–36 tools (depending on configuration)Control: MAZATROL SmoothG or Matrix Nexus 2 The machine features a full C-axis for both spindles and an automatic tool changer, making it suitable for highly productive applications in a compact design. Csdpfx Abeyfgdls Uera

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. Codpfxsx U D Hqo Ab Ujra • Tools: 30 pcs • Incl tools shown on the pictures • Excl barfeeder

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm Credexvfuvepfx Ab Uea RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine is currently operating in an Italian high-end facility specializing in individual components and custom manufacturing for Formula 1 as well as the aerospace sector. The machine is in exceptional condition. Photos are available upon individual request and under strict confidentiality. CNC turning/milling center (multitasking) with full 5-axis simultaneous machining - 2 turning spindles (main spindle + sub spindle) - B-axis milling head (swivelling milling head) + C-axes on both turning spindles - Designed for complete machining (turning + milling + drilling + threading + contouring) Working area / capacities: Crodpfoynmglsx Ab Uoa - Max. turning diameter: 640 mm - Max. turning length: 1,100 mm - Distance between spindle noses (min./max.): 250 / 1,350 mm - Distance between centers (min./max.): 125 / 1,225 mm - Bar capacity / spindle bore: 71 mm - Chuck diameter (typical for A2-8 configuration): 254 mm (10") Main spindle (left): - Spindle nose: A2-8 - Bar capacity: 71 mm - Speed range: stepless up to 4,500 rpm - Spindle power (depending on spindle package): approx. 22/18.5 kW (alternatively 15/11 kW available depending on package) Sub spindle (right): - Design: fully-fledged sub spindle (workpiece transfer/complete machining) - C-axis available (for milling/indexing operations) - Clamping device: hydraulic chuck (compatible with A2-8 configuration, typically 10") Milling unit / 5-axis kinematics: - B-axis swivel range: 225° (−120° / +105°) - Y-axis: ±125 mm (250 mm total) - X/Y “square stroke” / machining window: 250 mm × 250 mm - X-axis undercut below spindle center: 125 mm (for extended machining range) - C-axis on main and sub spindle (C1/C2) Tool / milling spindle (typical version): - Milling spindle in B-head for drilling/milling/threading/simultaneous machining - Speed (depending on package): approx. 8,000 rpm (higher speeds optionally available) - Power (depending on package): typically up to 18.5 kW (package dependent) Tool handling: - Automatic tool magazine (ATC): 120 positions - Automatic tool changer (magazine/ATC) Control / software: - Nakamura NT-Smart X user interface / process management - 5-axis capable CNC platform (CAM-compatible complete machining, simultaneous machining) Typical applications and process capability (for your listing): - Complete “done-in-one” machining: turning + milling + drilling + threading + 5-axis contours