Swiss-type lathe
TORNOS Deco 20 (fully refurbished)

Name: TORNOS Deco 20 (fully refurbished)
Brand: TORNOS
Availability: InStock

Year of construction

2024

Condition

Used

Location

Ballószög

Swiss-type lathe TORNOS Deco 20 (fully refurbished)

Show map

Machine data

Machine type:: Swiss-type lathe

Manufacturer:: TORNOS

Model:: Deco 20 (fully refurbished)

Year of construction:: 2024

Condition:: refurbished (used)

Functionality:: fully functional

Operating hours:: 4 h

Price & Location

Location:: Ballószög, Wass Albert u 25, 6035 Hungary

Call

Technical details

Equipment:: documentation/manual

Details about the offer

Listing ID:: A17226717

Update:: 28.05.2025

Description

For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units:

- painting of coverings
- replacement of all ball screws
Rjdpfeuq A T Sox Agzel
- replacement of all linear guides
- replacement of all cables and cable ladders in the machining area
- replacement of the entire pneumatic system
- replacement of the entire coolant system
- replacement of all axis servomotors
- renovation of all spindle motors
- main and control spindle renovation
- renewal of rotating guide bush and synchronous drive
- refurbishment of Fanuc control and servo amplifiers
- power elements, partial replacement of electrical components

Description
TECHNICAL DETAILS
- Number of axes : 8
- Number of spindles : 2
MAIN SPINDLE
- Max. bar diameter : 25.4 [mm]
- Max. machining length : 220 [mm]
- Spindle speeds : 10000 [rpm]
- Spindle power : 3.7 [kW] (5,5kW)
- C axis indexing precision : 0.1 [°]
COUNTER-SPINDLE
- Max. bar diameter : 25,4 [mm]
- Spindle speeds : 10000 [rpm]
- Spindle power : 1,5 [kW] (2,2 kW)
- C axis indexing precision : 0.1 [°]
CROSS SLIDE 1
- Number of positions : 5
CROSS SLIDE 1
- Number of positions : 5
- Number of motorized positions : 4
- Live tools speed : 8000 [rpm]
- Live tools power: 1,5/2,2 kW

BACKWORK UNIT
- Number of positions : 4
- Number of motorized positions : 4
- Live tools speed : 6000 [rpm]

POWER SUPPLY
- Supply voltage : 400 [V]
- Total installed power : 14 [kW]
WEIGHT & DIMENSIONS
- Machine floor space : 2270 x 1650 [mm]
- Machine height : 2200 [mm]
- Machine weight : 3500 [kg]

EQUIPMENT
- CNC : Fanuc
- Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW)
- Rotating guide bush (syncronised)
- Parts catcher
- Ejection of workpiece
- Coolant tank
- Bar loader LNS ALPHA 320S

OPTIONAL:
Long piece ejector device (max. workpiece lenght 700mm)
OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR

The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide.

If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Seller

Registered since: 2023

1 listing online

Call

Send inquiry

Telephone & Fax

+36 20 29... show

These listings may also fit your interest.

Listing

NESPRESSO coffee capsule production line ARBURG 720A300-800 / 70

Rheinfelden

7,946 km

NESPRESSO coffee capsule production line
ARBURG720A300-800 / 70

Call

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molds for capsules, manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, manufacturer: ARBURG, model: 720A3200-800, year: 2017 Item 03) Extraction system for 16-cavity capsule, manufacturer: Beck, year: 2019 Item 03) Extraction system IML system for 32-cavity capsule, manufacturer: Beck, year: 2019 Redpfx Asw Nriuogzol

See details

Listing

Vertical turning machines conventional & CNC Dorries Ø 6500 x 4270 mm CNC

Deinze

7,478 km

Vertical turning machines conventional & CNC
DorriesØ 6500 x 4270 mm CNC

Call

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm Rsdpfx Aewaiuqegzsl verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

See details

Listing

Germany

7,694 km

Briquetting press
WeimaC 150 rechts

€17,900

ONO plus VAT

Call

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. Rodpst Hagnjfx Agzol The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

See details

Listing

Vertical lathe machining centre DÖRRIES SCHARMANN VCE 2000/160

Sittensen

7,681 km

Vertical lathe machining centre
DÖRRIES SCHARMANNVCE 2000/160

Call

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Rjdeguk S Sopfx Agzol Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

See details

Listing

Surface Grinding Machine - Horizontal ELB Super-Rubin 024 CNC Unicon

Eislingen/Fils

7,988 km

Surface Grinding Machine - Horizontal
ELBSuper-Rubin 024 CNC Unicon

Call

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM grinding wheel dimensions::300 x 50 x 76,2 mm grinding spindle drive:2,8 - 8,4 kW Redpjcxxrzofx Agzjl weight of the machine ca.:3,5 t CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

See details

Listing

Montbrison

7,834 km

4-axis CNC vertical lathe
UMAROSC 27

Call

Condition: ready for operation (used), Year of construction: 2018, 4-Axis CNC Vertical Lathe Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofitted) CNC: FANUC 0i Specifications: Turning capacities: Max. swing diameter: 2650 mm Max. turning diameter: 2600 mm Max. turning height: 1900 mm Table: Diameter: 2500 mm Max. load: 15 t Rotational speed (2 ranges): 1 to 112 rpm Rodjw Add Eopfx Agzol Main motor power: 75 / 60 kW Cross rail carriages: Vertical travel right carriage: 760 mm Vertical travel left carriage: 1200 mm Cross rail: Vertical travel: 1600 mm Dimensions (width x depth x height fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Set of 4 jaws

See details

Listing

Tiefenbronn

7,926 km

Cnc swiss type lathe
CITIZENA32 VII CL

Call

Listing

Vertical Turret Lathe Emsil group VTL 45/50

Germany

10,526 km

Vertical Turret Lathe
Emsil groupVTL 45/50

Call

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine xH: 11,5 x 6,6 x 8,4 m CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. Rodpfx Aou Ix H Dsgzol other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

See details

Listing