Vertical turret lathe

TOS Hulin SKQ12

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 Itsdpjrq D Ukefx Abgsf machine in very good condition

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m Itjdpew A I Uuefx Abgsf

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t Isdpfx Abobh Ubwogetf mandrel Ø: 508 mm

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Itodpfx Abow Tcncjgsf Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Maximum drive power, from 198 rpm: kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Itsdpsygipasfx Abgsf Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t Iedpjd Ha E Sofx Abgstf mandrel Ø: 508 mm

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm Isdpfxeu Nfvuo Abgetf ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 Itodpfjyrf Dkox Abgof - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Isdpsxq Aqwofx Abgjtf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) Iedpfx Ajw Ty S Ssbgotf - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available