Lathe

TOS Trenčín SUI 40-1000 (1978)

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m Kjdsv Dvhyspfx Agzsnf The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] CROSS SLIDE 1 - Number of positions : 5 CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] - Machine weight : 3500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) Kodpfx Asuq A T Segzjnf - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Condition: ready for operation (used), Migatronic MTE 440 TIG AC / DC welder for steel and alumminium. Water cooling Migatronic CTU 3000. The maximum welding strength is 440 A. Knjdpfoh Ib Idox Agzef Tested by EWM service. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. If you have any questions you can contact us by phone. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article can happen and remain reserved. Shipping is exclusively to traders - for private consumers only a pickup is possible.

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, speed: 7000rpm, tool holder: SK50, power: 30kW, tool positions: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-fold pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection is possible. Kjdjvnd Suopfx Agzjnf

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent. Knjdsum Rpyepfx Agzef

Condition: good (used), . dimensions of the table 5000x550 mm . maximum rectifiable length 5000 mm . maximum transversal stroke 600 mm . Z axis travel 600 mm Knsdpfsip Dxwox Agzef . grinding wheel dimensions 420x127x100 mm . manual type head for inclined planes . tank with paper purifier . magnetic separator . magnetic plate with n° 3 units of 1.000x500 mm . length dimension 12000 mm . width dimension 2500 mm . height dimension 3500 mm . weight 15000 Kg . complete machine manuals .CE certificate

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Knedpeia Rtdjfx Agzof Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Tool holder, square: 1/2" Knodpjby Np Esfx Agzef electrical connection: 220 V, 280 W weight: 3,3 kg

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW Knedpfxjt Tqgxo Agzsf weight of the machine ca. 4,5 t

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Knedpeh Tk Rvefx Agzof Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m