Steady rests 2 pieces 500 diameter

VDF WOHLENBERG P-Turn

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position Cedsh Hm Thspfx Anwjrb -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: excellent (used), Herringbone Gear Generator MDV 2000 Credpfx Aefx Ibnjnweb MDV 2000 Characteristics: Max wheel diameter: 2000 mm Min wheel diameter: 50 mm Max module: 12 Min module: 3

Year of construction: 2000, condition: used, x-travel 1000 mm Cjdpot Hw Nyjfx Anwerb y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture Crjdpfew Rkt Isx Anwsb *

Condition: excellent (used), Make: HEYLIGENSTAEDT Type: NDC 710 / 1800 Control: R&D MTC3 4 Chuck 1400 mm Steady rest 3 units Ø 100-1050 Roller steady open 2 units Ø 1120 KNOLL Chip conveyor 2022 Boring bar Ø 260 x 3500 mm Boring bar Ø 200 x 1500 mm Boring bar Ø 150 x 1100 mm DBC Turning Length: 8250mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1120mm Spindle power: 100kW Workpiece load: 16000 Length: 14000mm Width: 3500mm Height: 2900mm Weight: 32000kg Codpfowzh A Ajx Anwsrb

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Codpfx Asyhhuwonwjrb Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Crodpev N Di Ajfx Anweb Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: used, number of spindles 4 Cjdpfxst Hw U Nj Anwerb bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Cedef Alb Aspfx Anwjrb Main features -attractive price of a very well equipped basic version -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 21 mm, turning diameter: 210 mm, total length: 1,200 mm, total width: 500 mm, total height: 550 mm, spindle speed (max.): 1,710 rpm, spindle speed (min.): 140 rpm, overall weight: 120 kg, spindle motor power: 550 W, UNIVERSAL LATHE TYTAN 520 210 × 520 mm The Tytan 520 is a very reliable lathe designed in a simple and logical way. It is suitable for home workshops, educational workshops, and industrial use. Crjdpfoyrrzcjx Anwob THE LATHE DOES NOT INCLUDE A STAND THE LATHE IS IN STOCK AND AVAILABLE FOR IMMEDIATE SHIPPING Technical Specifications Turning diameter: 210 mm Distance between centers: 520 mm Spindle speed: 140 – 1710 rpm Number of speed ranges: 6 Spindle taper: MT3 Spindle bore: 21 mm Tailstock taper: MT2 Tailstock quill travel: 65 mm Longitudinal feed: 0.04 – 0.2 mm/rev Metric thread pitch: 0.4 – 3 mm/rev Inch thread pitch: (16) 8 – 48 TPI Motor power: 0.55 kW / 230 V Weight: 120 kg Machine dimensions (L × W × H): 1200 × 500 × 550 mm Standard Equipment 3-jaw chuck – 125 mm Drill chuck Chuck guard Tool post guard Set of cutting tools Arbor Delivery to the customer is possible. Shipping costs are calculated individually by the transport company.