Center lathe

WEILER

Condition: good (used), functionality: fully functional, Internal article number: 26062 Lathe Weiler Matador + Multifix "A" base plate + 3-jaw chuck + Collets Kjdszfhx Nopfx Anyedn Center height approx. 150mm Turning diameter over cross slide 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Spindle speed range 30 - 3500 rpm Automatic longitudinal/face feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe Kodpfx Anstzf N Rsyjdn -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: good (used), functionality: fully functional, Internal article number: 26064 Lathe Weiler Ergodor + Digital display + Multifix "A" base plate + Three-jaw chuck Center height: 145mm Center distance: 470mm Swinging diameter over bed: 300mm Spindle bore: 36mm Spindle speed: 15 - 3550 rpm Dimensions (L x W x H): 150 x 70 x 150cm Weight: 1000kg Kodezfhm Tjpfx Anyodn The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: used, Year of construction: 1992, Weiler Guide and Lead Screw Lathe Type / Model: Condor B Condition: Used Year of Manufacture: 1992 Technical Data Center height: 165 mm Center distance: 750 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 180 mm - 185 mm Main spindle and drive Speed range: 22 - 2800 rpm Spindle bore: 40 mm Spindle head: DIN 55027 / Size 5 (with bayonet fitting) Drive power: 3.2 kW Feed and threading Longitudinal feeds: 0.016 - 0.8 mm/rev Metric thread pitches: 0.18 - 28 mm Tailstock Internal taper of the quill: MK 3 Quill travel: 110 mm Dimensions (L/W/H) approx.: 2000 mm x 860 mm x 1600 mm Kdodpfxezfhgte Anyen Weight approx.: 1,100 kg Delivery costs via freight forwarder to the curb are shown in the shopping cart or in the individual offer for items on request.

Condition: new, Year of construction: 2024, CASOLIN electronic squaring machine mod. ASTRA 400 5CNC brand new 5 controlled axes version roller carriage mm. 3200 width mm. 360 parallel guide with controlled axis positioning - max opening mm. 1300 telescopic flag with linear guide blade motor HP 7.5 with automatic star/delta starting Kdsdpfou At Sdox Anyon saw speed rpm 3200/4200/5000 cross slide with tilting register controlled axis blade lifting and tilting motorized engraver two-axis control max. blade diameter mm. 400 parallelogram blade protection Processing materials: wood, plastics, special materials

Condition: used, Year of construction: 1996, Weiler Guide and Lead Screw Lathe Kjdpfszfgupex Anyodn Type/Model: Condor AC Condition: Used Year of Manufacture: 1996 Technical Data: Center Height: 165 mm Center Distance: 750 mm Swinging Diameter over Bed: 330 mm Swinging Diameter over Cross Slide: 180 mm Spindle Bore: Ø 40 mm Spindle Speed, Stepless: 22 - 2,800 rpm Spindle Head: DIN 55027 Size 5 (Short Taper) Drive Power: 5.5 kW Tailstock and Feeds: Tailstock Taper: MK 3 Quill Stroke: 110 mm Feed Range: Automatic Longitudinal and Cross Feeds: approx. 0.016 - 0.50 mm/rev Thread Cutting Range: Suitable for metric threads and inch threads: approx. 0.20 - 28 mm Dimensions (L/W/H): approx. 2000 mm x 860 mm x 1600 mm Weight: approx. 1,100 kg Delivery costs via freight forwarder, free to curb, can be found in the shopping cart or in individual offers for items available on request.

Condition: good (used), For sale is the lathe shown in the pictures, manufactured by the German company Weiler, model Primus. The machine is in very good condition. I can arrange for the machine to be loaded on site. Net price + 23% VAT. Chuck: 120 Turning diameter: 240 Turning diameter over the carriage: 140 Taper in the headstock: MK2 Kjdjzfgcmjpfx Anyjdn Minimum speed: 150 Maximum speed: 3200 16 spindle speeds Longitudinal and transverse feeds Metric and inch threads Spindle bore: 24 Right and left jaws Steady rest / chuck jaws

Year of construction: 2026, condition: new, A modular system that you can easily adapt to your needs: * Mechanical or electric grinder * Packing press or basket press * Fruit presses in various sizes: 5 - 70 liters All home cideries offer: * Highest juice yield through hydraulics * Ergonomic and hygienic operation Kdsdpfxjuady Do Anyen * Compact unit with mobile frame RINK - home cideries - :according to your needs: * The Standard home cider makers include a manual fruit grinder and enable an hourly output of up to approx. 70 liters. * The Super home cider mills include a RINK scraper mill and enable an hourly output of up to approx. 150 liters.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection Kodpfx Anszd Tycsyedn >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine xH: 2,3 x 1,4 x 1,7 m Kodpfx Aezd Sg Ijnysdn The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm Kdodpfx Ajykb Hfenysn - Coolant device

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) Ksdpfx Aexacgdenysdn - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 Kdodpfswnh I Ssx Anyon - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed Ksdpfx Ajwtct Henyodn *

Condition: used, Year of construction: 2003, Technical details: turning diameter over bed: 720 mm turning dia. over face-slide: 430 mm turning length: 2000 mm bed width: 480 mm centre distance: 2000 mm centre height: 360 mm face slide travel: 410 mm control: Siemens Sinumerik 810D Weiler D2 Steuerung revolution per minute: 1 - 1800 U/min spindle diameter: 280 mm spindle bore: 216 mm spindle head: DIN 55026 - Größe 15 Kdsdpfxjzdn S Ho Anyen max. torque on the spindle: 4300 Nm tailstock taper ISO: MK 6 tailstock quill stroke: 225 mm tailstock quill diameter: 115 mm total power requirement: 30 kW Weight approx.: 6,2 t dimension machine xH: 4,3 x 2,5 x 1,95 m Oil Country Lathe Special machine for machining long bars and pipes. For sale is an extremely robust and precise WEILER E70 x 2000 heavy-duty lathe, manufactured in Germany to the highest quality standards. The machine is ideally suited for: ·Single-part production ·Repair work ·Toolmaking ·Heavy-duty machining applications in industry The WEILER E70 impresses with its: ·High rigidity and stability ·Large spindle bore capacity ·Excellent torque performance Perfect for machining: ·Large shafts ·Flanges ·Pipes ·Heavy workpieces Tool holder: Multifix size C *