Precision lathe

Weiler Matador VS2

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Dcsdpjyylq Ujfx Anwog Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: like new (used), Year of construction: 2023, operating hours: 180 h, functionality: fully functional, machine/vehicle number: ITR1822394, total height: 1,800 mm, space requirement length: 800 mm, space requirement width: 800 mm, space requirement height: 1,800 mm, motor manufacturer: Otto Klein, power: 52 kW (70.70 HP), operating pressure: 30 bar, type of cooling: air, For sale is a professional high-pressure compressed air station from Atlas Copco, model LT7-30UV BM. The unit was manufactured in 2023 and is in excellent, almost as-new condition. With only 179.9 operating hours, the machine is barely broken in. The LT series from Atlas Copco is the benchmark for industrial high-pressure applications and is renowned for its extreme durability, low operating temperatures, and long service life. A particular highlight is the premium, hot-dip galvanized 350-liter air receiver, specially designed for high-pressure use (up to 36 bar operating / 51.5 bar test pressure) to offer maximum corrosion protection. Technical Data Manufacturer: Atlas Copco Model: LT7-30UV BM Year of manufacture: 2023 Condition: Excellent / Nearly new Operating hours: approx. 180 h Max. operating pressure: 30 bar (435 psi) Free air delivery: 6.4 l/s (~ 23 m³/h) Motor power: 5.16 kW 400V / 3 phase / 50 Hz Speed: 1,500 rpm Receiver: 350 liters, hot-dip galvanized Certifications: CE, EAC, UKCA Reference number: 8115460928 Serial number: ITR1822394 On request, transport and loading can be arranged Europe-wide for an additional fee. Price plus VAT. Inspections available by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your equipment? Djdpfjy Anb Iex Anwjcg For further information or to get in touch, please visit our website.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg Dcjdpsyylqhsfx Anweg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev Djdpfxjyyb T So Anwscg >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 87624-17, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 860 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 20, No reserve price – guaranteed sale to the highest bidder! Dcsdewvi Szopfx Anweg Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Travel X-axis: 760 mm Travel Y-axis: 550 mm Travel Z-axis: 300 mm Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Table width: 550 mm Table length: 860 mm Table load capacity: 800 kg Spindle speed (max.): 42,000 rpm Spindle type: FISCHER MFW-1230-42 Spindle taper: HSK-E40 Number of tool magazine positions: 20 Tool holder diameter: 40 mm MACHINE DETAILS Serial number: 87624-17 Overall height: 2,800 mm Overall length: 3,400 mm Overall width: 2,300 mm Total weight: 6,500 kg EQUIPMENT - Documentation/manual - Stepless speed control - Tool package

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Matador VS2 lathe, year of manufacture 1992, three-jaw chuck, Multifix, rear splash guard, electric chuck guard. The machine is in good working condition and can be demonstrated under power by appointment. Dcsdpex Sqvgjfx Anwjg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, turning diameter over cross slide: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 lathe in very good condition from an educational institution, year of manufacture 1991, original paintwork, with Heidenhain digital readout and accessories. Technical specifications: * Machine number 91-102 * Centre height 140 mm Dcodjytd U Repfx Anwsg * Distance between centres 500 mm * Speed: 15 / 3550 rpm * Spindle bore 36 mm * Spindle nose DIN 55027 -5 * Tailstock MK 3 * Automatic feed from 0.012 to 0.9 mm/rev * Thread cutting capability: metric, inch, module, and diametral pitch threads * Metric thread pitch from 0.25 to 12 mm * Weight approx. 700 kg Accessories and equipment: * Heidenhain 3-axis digital readout * 3-jaw steel chuck * Motor with brake * Multifix quick-change toolpost with 4 holders * Drill chuck * Rotating centre * Change gears * Electronic spindle protection * Machine manual in German.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, No minimum price - guaranteed sale to the highest bidder! Maintenance regularly performed by BigRep GmbH technical staff TECHNICAL DETAILS Nozzle size: 0.6 mm Layer height range (for 0.6 mm nozzle): 0.1 mm – 0.4 mm max. output (with 0.6 mm nozzle): 16 mm/s Extruder: Two MXT extruders with 0.6 mm and 1 mm nozzles Printing area Build volume (X × Y × Z): 1,005 × 1,005 × 1,005 mm Layer height resolution: 0.1 mm – 0.8 mm Acceleration: up to 10 m/s² Printing technology: FFF – Fused Filament Fabrication (material extrusion) Printing materials: ASA, PA66 (other materials in development) Support materials: soluble plastics Max. print bed temperature: 99°C MACHINE DETAILS Printer (L × W × H): 1,950 × 2,430 × 1,790 mm Printer weight: 1,500 kg Installation requirements Floor: even and flat Safety distance: 2 m around the machine (when doors are closed) Required floor load: 500 kg/m² Operator: operator must be trained Operating temperature: 18°C to 25°C Relative humidity: 30 to 70% (non-condensing) Exhaust diameter: 100 mm Dodpfxewpqm Ho Anwjcg Electricity Connection configuration: 3 × AC 400 V, 50/60 Hz Connections: CEE socket (400 V, 16 A), LAN network (RJ45) Input current: 16.0 A Power consumption: 5,800 W Safety certifications: CE certified EQUIPMENT - 15 rolls of large filament - Packaging: original manufacturer’s foil

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button Dcedpfx Asxq Hhyjnwog - Operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min Djdpfx Aoxnda Usnwecg total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions