CNC horizontal machining center

Weinig Conturex C114

Condition: used, Year of construction: 2009, max. workpiece length 4500 mm profile spindle 1 Stück main drive 20 kW Control Siemens Weinig Conturex 2 C 114 ----- Working width: 40-260 mm Working height: 25-110 mm 2 x PowerGrip clamp tables, 2 x 2280 mm ----- Workpiece length 200 - 4,500 mm Workpieces over 2,700 mm in length are machined using a repositioning cycle. Main spindle 1: ----- Motor with brake 20 kW HSK 63F Electronically adjustable speed 2,000-18,000 rpm Maximum tool length from flat surface HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of pockets: 30 mm Nedpjwunwyjfx Ab Tscn Pitch between pockets: 100 mm Permanently installed multi-spindle drilling head ----- For horizontal and vertical drilling and milling work without tool changes ----- Price ex-site Prices for disassembly and loading onto customer trucks Transport within Germany and abroad as well as reassembly Commissioning and, if required, new profiles are available upon request! Used tools included (drawings available upon request): ----- Wood: IV 68, 78, 88, opening inside and out, with hinged weatherboard Wood-aluminum: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical specifications according to the manufacturer - no guarantee! Detailed technical description available upon request!

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle Nsdpfx Asvu Hfqsb Tecn ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Available from Q1 2026 Technical data Blister module (B 1770) Max. output 700 blisters/min Application area: solid products Max. format range [feed x width] Nsdev D Ipiepfx Ab Tscn 200 x 284 mm Cartoning module (C 2305/C 2504) Max. output 300 or 500 folding boxes/min. Application area: blisters Max. folding box size [A x W x H] 105 x 105 x 155 mm or 80 x 90 x 155 mm For details, see PDF

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Ncjdpfx Abet Uduxo Ton

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer Nedpeyclwxofx Ab Tscn - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Ncjdpfx Abjxpi Dus Ten Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Weinig Powermat 500 Four-Sided Planer and Moulder for planing and profiling solid wood on four sides. The machine features CNC control and the proven PowerLock quick-change system. Additionally, it is equipped with an automated return mechanism for the planed workpieces, ensuring optimum suitability for efficient production processes. Machine Configuration - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm Njdpfxex Sxfve Ab Tocn 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable length: 2.5 m (including straightening ruler) Top pressure rollers, spring-loaded Side pressure, pneumatically actuated Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Reduced feed roller spacing between feed elements (400 mm) Additional feed rollers and shortened roller spacing Durofer steel feed roller, self-cleaning Infeed roller before the first bottom tool, pneumatically actuated Siemens/Powercom control system The machine is in very good and well-maintained condition, has been professionally operated and serviced regularly, and will remain in operation until 17.12.2026. Viewing of the machine in operation is possible by appointment at any time. The technical description as well as the layout drawing of the machine can be found in the documents.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, saw blade diameter: 360 mm, Raimann ProfiRip KM310 Multi-blade Saw Track width: 330 mm Maximum saw blade spacing: 310 mm Cutting height: 120 mm Sleeve diameter: 80 mm Passage width: up to 650 mm Feed speed: up to 35 m/min Electrically adjustable saw shaft height Saw blade size: 280-360 mm Quickfix rapid-change system Motor power: 30 kW CE certificate Year of manufacture: 2007 Nedpfxex E Ug Aj Ab Tjcn

Condition: used, mileage: 164,135 km, power: 62 kW (84.30 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 09/2024, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2012, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI with EURO 5 emissions standard and truck registration is a used commercial vehicle that stands out with its practical configuration. Powered by a 2.0 TDI engine delivering 62 kW (84 hp), it provides sufficient performance for a variety of transport tasks. The vehicle was first registered in July 2012 and has a valid main inspection (HU) through September 2024. It has a mileage of 164,135 km and comes in the distinctive color Ginstergelb (Broom Yellow). Equipped with a manual transmission, the T5 features five gears and front-wheel drive. The transporter is fitted with two sliding doors, on both the left and right sides, allowing for easy access and efficient loading and unloading. Dimensions are 1,970 mm in height, 1,904 mm in width, and 4,892 mm in length, with a wheelbase of 3,000 mm. The gross vehicle weight is up to 2,800 kg. Ncjdpsydh U Aefx Ab Tsn The T5 Transporter offers a combined fuel consumption of 7.2 l/100 km and has CO2 emissions of 190 g/km. With a level 4 (green) environmental badge, it is well-suited for urban driving. The vehicle is available for immediate inspection and is exclusively intended for commercial buyers or for export. Registration service and delivery within Germany are available for an additional fee. Sale only to trade customers (agriculture, self-employed professionals, small and large businesses) or for export. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Auction of a Weinig Unimat 500! Ncsdpoyh Uw Nsfx Ab Ten The machine will remain in operation until mid-May. Viewing can be arranged by appointment!