Planers and Planing lines

Weinig Unimat Super 4

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Four-side planer WEINIG UNIMAT SUPER 4 Year of manufacture: 2003 TECHNICAL DATA: - min / max width of workpiece: 45 / 150 mm - min / max height of workpiece: 15 / 50 mm Iijdpfx Aeyivilsbgea 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 18.5 kW 3) lower horizontal 5.5 kW spindle diameter: 40 mm

Condition: used, Year of construction: 2006, operating hours: 8,835 h, load capacity: 6,000 kg, lifting height: 4,000 mm, fuel type: diesel, empty load weight: 9,160 kg, color: red, We offer a side loader Jumbo JDQ 60712/52 Iedpfsx Trllex Abgeia

Year of construction: 2003, condition: used, Technical data: - Manufacturer: Weinig - Type: Unimat Super 4 - Year of manufacture: 2003 - Working width: 25 - 150 mm - Working height: 15 - 50 mm- Shaft arrangement: Spindle 1 below: Planing and milling the guide groove 125x40x40 mm, Z=2 125x120x40 mm, Z=2 Spindle 2 above: Combination tool consisting of special planing head with guide groove and 2 flat milling cutters. Precise thickness planing and flat milling of the gluing surfaces on the right and left. Face milling cutter on the right: 240x17x40mm, Z=8 Special planing head: 125x240x40mm, Z=4 Face milling cutter on the left: 240x80x122mm, Z=8 Tool flight circles 125 and 250mm Spindle 3 below: Removing the guide groove and finish planing. 125x170x40mm, Z=4 - Spindle 1: 11 KW - Spindle 2: 18.5 KW - Spindle 3: 5.5 KW - Feed engine: 2.2 KW - Feedspeed: 5-20 m/min. - Speed spindle 1 and 3: 6.000 rpm. - Speed spindle 2: 7.000 rpm. - Transport rollers D (hardened): 140 mm Ijdpfx Abjyatffegsia - Length of infeed table: 2.000 mm - Hardened machine tables - Guide groove in machine table - Suction nozzles 2x140 mm, 1x160 mm - Volume flow: approx. 5,500 m³/h - Volts/Hz: 400/50 - Location: Blomberg warehouse from 01/2026

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm Iiedpfx Abjw E I Ruegoa - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension Iiedpfxewnbfko Abgsa -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW Iodpjin Nrgofx Abgjia feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 3,500 kg, fuel type: diesel, empty load weight: 5,416 kg, total length: 4,540 mm, drive type: Diesel, Mast type: None Iisdpfxsvcf Ums Abgoa Technical condition: New Front tires type: Air Front tires size: 16/70-20 Rear tires Type: Air Rear tires Size: 12-16,5 CE certificate, STANDARD EQUIPMENT - Tiltable cab with tilt support - Safety belt with sensor monitoring - Audible reversing alarm - Emergency stop button - Rotating beacon - Hill holder - Hill start assist - Negative brake - Rear-view mirror - Steering wheel adjustable in inclination and depth - Joystick for overall control of all main functions - Armrest - Inching pedal - ECO Mode system - Digital display - Diesel filter with water separator FORKS - Fork 1.200 mm - Fork carriage plate 1,260 mm type FEM III - Integrated sideshift

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables Iiodpfxemt Hhwo Abgsa no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer Iodpsf Sqckefx Abgsia - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: excellent (used), Year of construction: 2002, Manufacturer - OMES Capacity - 1400 pallets/shift Iiodpfewwiv Aex Abgja Year - 2002 Line currently dismantled