Center lathe

Weipert W500

Year of construction: 1967, condition: used, Lathe, manufacturer Weipert Type W500 Gsdpfx Aeh Rwklenyeud Turning diameter 500 mm Turning length 1000 mm

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Godpey T E Rzjfx Anysud Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: Guodpfx Asyf Ehienyed - Drilling capacity 25 mm - Drill spindle taper MK 3 - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Table 1000 x 1000 Gusdpfx Aot T Rkdenyod

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Gedjrpnf Aopfx Anyoud Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approximately 250 operating hours, available for immediate delivery. - Complies with DIN EN 1539 for solvent-containing substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - JUMO dTRON 04 temperature controller - Maximum permissible solvent quantity: 19.30 g - Heating power: max. 21.78 kW, connected load 22.5 kVA, rated current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also possible as a fixed connection, in which case fuse with 35 or 50 A - Incl. 1 grid insert - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Gujdpfeiq Uv Nsx Anysd Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, temperature oven, paint drying oven, solvent oven

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Gedpfsd E Np Eex Anyjud Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual Guedjwu Du Iepfx Anyed

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Gusdpfx Anowl A H Doyjd Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Condition: excellent (used), functionality: fully functional, grinding length: 4,000 mm, Technical specifications: Machine weight: 19,400 kg Total power consumption: 18 kW Max. grinding diameter: 630 mm Distance between centers: 4,000 mm Guodozgu Tpepfx Anysd Max. workpiece weight: 2,500 kg