Thicknessing machine

WINTER PLANERMAX 530

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1150x1120x1310 mm Ltodpfx Agovz H Dtszoa Weight 650 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm Lsdomdr A Ejpfx Agzjta diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Picture contains special accessories

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1150x1120x1310 mm Lsdpfx Ajvz H Dmjgzeta Weight 650 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Heating capacity / nominal heat output: 21 kW For rooms up to approx. 300 to 500 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling volume: 80 ltr Required chimney draft min. 12 Pa Mass of the filling opening (L x W) 300 x 340 mm Weight: 375 kg Efficiency 88,2 Energy efficiency class: A+ Ledpfxshvibzs Agzsta EWI-A 15G space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the limit values of the 1st BImSchV. (Federal Immission Control Ordinance)

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Ltjdpfxov Dvkzs Agzea Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table Ltsdpfx Agjw Tfybozea * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: excellent (used), SICAR Forte 400 thicknesser Ljdpfx Agst Rp Hxjzeta Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Ltsdpfx Aoxdl U Eogzsa

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Ledpov Dvfrjfx Agzjta Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Year of construction: 2009, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. machining length: 10,300 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. CNC, Metalurgia y Fabricación Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Ltjdpfx Agotvrc Sezsa Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg Viewing possible