Veneer press

WINTER SOLID 3013-120

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2150 mm Dkjdpfx Apev A Hlgo Ieu Weight 7500 kg Total power requirement 54 kw

Condition: new, Year of construction: 2026, New Optimizing saw SALVACUT 5000 by SALVAMAC Dodpfen E Sl Rox Ap Ioku Innovative high speed optimizing saw with optimization and elimination of wood defects, with double traction with upper rollers and lower feed belt with independent management. From an idea of Salvador Christian.

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Dodpfx Aetwqzlsp Isku

Year of construction: 1995, condition: good (used), UV roller coater Bürkle Brand: Bürkle Model: SAL 1300 Machine no: 7251 Year of manufacture: 1995 Tech. data: Working width: 1300 mm Workpiece thickness: 100 mm Working height: 870 mm Feed speed: 6-30 m / min Chromium-plated doctor roller: Diameter 174 mm Rubber covered applying roller: Diameter 238 mm Dkedpfxog Hr A Ie Ap Isu Working pressure max: 6 bar Motor: 2,2 kW, 400V, 50 Hz, 3-phase Size for transport: 2850x900x2200 mm Weight: 1450kg Stock No: 2000360

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Dkedpjxtfgyefx Ap Iju

Condition: not inspected (used), Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm feed 5-25 m/min Dimensions (L/W/H) 4700/1800/1100 mm weight ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ----- 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: Dkodpfx Ajwmggksp Iou 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: 241.371, saw blade diameter: 350 mm, total length: 7,300 mm, total width: 7,600 mm, cutting width (max.): 5,800 mm, power: 15 kW (20.39 HP), cutting height (max.): 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 46 A, plate length: 7,300 mm, platform width: 5,800 mm, saw blade bore: 30 mm, table height: 970 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, scorer, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection - pressure beam - longitudinal saw: 2 x Ø 120 mm Extraction connection - chip channel - longitudinal saw: 1 x Ø 100 mm Extraction connection - angle stop - longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction capacity: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length for saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring saw blade diameter (V): 300 mm Saw blade projection above table (U): max. 95 mm Maximum clamp opening (K): 90 mm Djdpfxsytfxwe Ap Ieku Maximum stack height (P): (including total wave heights and all max. panel thickness tolerances) 80 mm Minimum panel thickness or stack height (P): (with use of a strip aligner) 6 mm Minimum alignment force of strip aligner: 400 N / unit Maximum alignment force of strip aligner: 2000 N / unit Working height, longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit feed speed, forward: 5 to 120 m/min Saw unit feed speed, return: 120 m/min Return feed speed – longitudinal saw: up to 80 m/min

Condition: used, machine/vehicle number: 008728, Max working length: 3000 mm Max working width: 1300 mm Heating System: electric No of Pressing cylinders: 6 Dkjdjzylwfopfx Ap Iou

Condition: used, Year of construction: 2018, The machine has been partially reconditioned and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Part height: ~ 3–70 mm - Number of tubes (top): 3 - With bar feed Dkjdox Tpx Aspfx Ap Iou - Bar pitch: 60 mm - Suitable for mercury tubes - Suitable for gallium tubes - Tube power: max. 120 W/cm - Rated power: 56 kW/104 A - Voltage, Hz: 400 / 50 - Control cabinet integrated beneath the machine - Feed rate adjustable: ~ 1.25 – 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air flow rate: 3,600 m³/h - Location: in stock - Volts, Hz: 400 / 50

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 5 kW (6.80 HP), Automatic electro-mechanic throughfeed case clamp press with eletronic adjustment of the pressing forces, timing and programable closing sequence of the pressing elements. Manufacturer: SCM Group (division CPC) Model: Action TF2500 Production year: 2013 Machine state: plně funkční Main technical parameters: - max. cabinet dimensions: 2500 x 1250 x 650 mm Dsdpfxszgtg Ij Ap Ieku - min. cabinet dimensions: 250 x 250 x 250 mm - feeding belt speed: 20 m/min - working height: 600 mm - length of the infeed conveyor: 2500 mm - length of the outfeed conveyor: 2500 mm - overall power 5kW (15A) Funkcionality: Automatic reading of the cabinet at the infeed including the automatic detection of the central fixed shelf. Programator: - control panel with touchscreen LCD (size 14 cm) - setting of the horizontal thrust (0-1300 kg) - setting of the vertical thrust (0-1300 kg) - selection of the closing sequence (top presser, side presser, top/side presser) - setting of the exact position of the middle side pressers