Travelling column milling machine

ZAYER KCU 8000

Condition: used, Year of construction: 2017, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpm Movement X/Y/Z : 4500/1800/1300 mm In General: Year of manufacture:2017 Control system:Heidenhain TNC 640 Travel range X/Y/Z:4,500/1,800/1,300 mm Spindle speed:5,000 rpm Tool holder:SK 50 Milling head (spindle): Technology:Diagonal head with gear spindle Index:0.001° Speed:5,000 rpm Tool holder:SK 50 Nsdpfjy Eu Tvsx Af Uewi Max. power:43 kW Max. torque:1,045 Nm Coolant supply:Coolant + blast air Working table: Clamping surface:6,000 x 1,100 mm T-slots:6 x 22H12, spacing 140 mm Tool magazin: Technology:Chain magazine Number of stations:40 Tool changer:Double gripper (horizontal/vertical) Max. tool diameter:125 (250) mm Max. tool length:400 mm Equipment: Position measurement systems:Direct scales Chip removal:Chip conveyor Coolant supply:Internal coolant system with filter, 20 bar Workpiece measurement:Funk M&H probe Set-up operation:HR 510 electronic handwheel Software option:Adaptive Control

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Njdpfx Afowf Dpgs Uowi Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Control system: FANUC 16 Key Features: External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. Nwedpjy Elz Dofx Af Uoi For more information, photos, or pricing, please get in touch.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Nedpfx Aoxf E Twjf Uswi Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Nodpfot Hw U Nex Af Uowi

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Njdpjyx Hgzefx Af Uowi Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Nwedpfx Aoxln Iwof Uoi Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Nodpfxjt Rkcuo Af Ujwi Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET Nwjdswqb Scepfx Af Uoi The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Nwodpfjgbfaxjx Af Uji Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm