Center Lathe

ZMM C 10 TH

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg Itsdpfox Ein Sjx Abgof - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, Year of construction: 1998, workpiece weight 150 kg Itjdpfjwcg Elox Abgsf workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, Maximum Rotor Weight ---3000 kg (6613.87 lb) Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Isdpfor Dd Avjx Abgstf Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs Itedpfofc T Tqsx Abgef -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens - Power [kW]: 37.0 Iedpfx Aownidhsbgstf - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. Itedpfxjv Rpn Tj Abgof We cordially invite you to cooperate!

Condition: ready for operation (used), Year of construction: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture 1985, weight 8 tons. Control system Mazatrol T3, with three-jaw chuck, tool turret, tailstock. Ready for use, can be viewed while still powered. Iodpfx Aevzgyhjbgotf

Condition: like new (used), Year of construction: 2022, 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 hand and foot remote control with speed indicator very robust Itsdpfed Anz Rox Abgjf

Condition: new, The Servoturn 500/1000, a remarkable addition to the Conventional Horizontal Lathes category, exemplifies the innovative approach of KNUTH in the Servo-conventional Lathes group. This machine integrates cutting-edge feed technology with the reliability of traditional engineering. Its electronic hand wheels and ball screw drives enhance precision, enabling high-torque servo motors to execute feed movements with unrivaled dynamics, surpassing standard lathe capabilities. The user-friendly interface allows operators to select feed and thread pitches effortlessly, while the rapid traverses minimize downtime, ensuring high productivity. A robust machine frame and heavy-duty tailstock guarantee stability and performance, making it suitable for heavier materials. The Servoturn 500's standard equipment includes a quick-change tool holder, a 3-axis position indicator, and a reliable coolant system. Experience unparalleled turning with this advanced machine. To learn more, request a quote today and elevate your machining capabilities with the Servoturn 500/1000, a stellar choice in the Servo-conventional Lathe market. Iodpsl Iy Sijfx Abgotf

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Lg.No. 22621 Technical data: - max. working length 3500 mm - column passage 3050 mm - max pressing force 2000 kN - max distance table / ram 480 mm - column throat 260 mm - ram stroke approx. 300 mm - Stroke speeds - downward speed idle max. 100 mm/sec - Upward speed 80 mm/sec - Downward press speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - weight approx. 16000 kg - with: - CNC - control CYBELEC renewed in 2008 Isdpfx Asip Nikebgotf - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. tool clamping - upper tool + universal die tool - material supports - two-hand control panel