Center Lathe

ZMM C 10 TM

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min Pjdpfxjqv Iw Ts Agksgn tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: used, Year of construction: 2002, turning diameter max. 420 mm turning length 1250 mm Psdpfjt U R Hzox Agkegn control INDEX, C 200-4 D swing diameter 630 mm travel x1 320 mm travel z1 1250 mm travel x2 170 mm travel z2 1250 mm travel x3 320 mm travel z3 1250 mm main spindle speed max. 3000 U/min main spindle drive 53 kW spindle passage 102 mm spindle head DIN 55026 Gr. 11 max. torque on the spindle 675 Nm sub spindle - spindle speed range max. 3000 U/min sub spindle drive 53 kW sub spindle - spindle passage 102 sub spindle - spindle head DIN 55026 Gr. 11 sub spindle - spindle torque 675 Nm travel sub spindle 1250 mm feed power X1 14000/Z1 14000 N rapid traverse X1 20/Z1 40 m/min feed power X2 8600/Z2 14000 N rapid traverse X2 20/Z2 40 m/min feed power X3 14000/Z3 14000 N rapid traverse X3 20/Z3 40 m/min numbers of turret head positions Rev. 1 = 12 numbers of turret head positions Rev. 2 = 10 numbers of turret head positions Rev. 3 = 12 number of driven tool stations 12 / 10 / 12 speed of driven tools max. 6000 U/min max. torque 36 / 21 / 36 Nm tool taper DIN 69880 tool taper ø 40 x 63 mm total power requirement 120 kW weight of the machine ca. 19 t dimensions of machine L x W x H 5,77 x 2,47 x 2,62 m Accessories: segment bushing chuck HAINBUCH on main spindle, collet chuck HAINBUCH, SPANNTOP SP on sub spindle, various tool holders (also for driven tools), chip conveyor, coolant - all 3 turrets are prepared for coolant through spindle, but the highpressure coolant pump and tank are not with the machine -

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm weight of the machine ca. 4-6 t Pgsdpfxeugnxde Agkon

Year of construction: 2020, condition: as good as new (ex-display), Hydraulic press for tests and retouching of dies Brand: MHG Model: ER.2S.DM-300/2100 Serial number: 927 Psdpfxsk Sgvyj Agkogn Year: 2020 Required power: 40kw Hydraulic oil: 1000Ltrs. deposit + 200 liters. circuit filling Total number of cycles: 403 (NEW MACHINE, PRACTICALLY UNUSED) Maximum force: 300t Number of cylinders: 3 Maximum tooling dimensions: 1400x1400mm Maximum tooling mass: 16,000kg Maximum working table and mobile table opening: 1690mm Minimum opening of work table and mobile table: 960mm Maximum mobile table travel: 730mm Approach speed: 92 mm/s Recoil speed: 93mm/s Stop time: 0.2s Safety distance: 500mm Weight with empty tank: 35.000kg

Condition: used, Year of construction: 1998, grinding length 2000 mm grinding width 600 mm Pgodpfxsv S Ip Es Agken total power requirement 17 kW weight of the machine ca. 10 t

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: xxxxx, Washing machine Manufacturer: CIEFFE Type: WCR 8/X/"/VAP/US/G-R Year of construction: 2007 Heating: 120kW gas Evaporator vacuum boiler, ultrasonic, dryer, compact de-oiler, level controller Cleaner tank 4500 ltr. Flood tank 4500 Ltd. Podpfeqtyxkex Agkogn

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. Pgjdpfsupzmujx Agkon A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: ready for operation (used), functionality: fully functional, 75mm clearance 500mm chuck with rotating jaws Pgodpfx Aoqwgz Uegkon Max workpiece diameter 640mm

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Pgodpfx Agewdgpgjkon

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia – used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision and reliability. MTP METAL LATHE 800x3000 7.5 kW SPINDLE BORE 105 Packaging condition: original LATHE CQ6280 800 x 3000 mm The machine tool is designed for machining workpieces, most commonly with rotational geometry (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical data: Max. workpiece length: 3000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing over gap: 1035 mm Z1 axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16) 25 – 1,600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022 – 0.74 mm/rev Feed Z-axis: (25) 0.044 – 1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock offset: 11 mm / 0.4" Metric threading: (54) 0.45 – 120 mm Diametric threading: (42) 0.88 – 160 DP Module threading: (46) 0.25 – 60 mm Whitworth threading: (54) 7/16 – 80 TPI Main motor power: 7.5 kW Power supply: 400 V Overall dimensions (L x W x H): 4740 x 1140 x 1910 mm Pgsdeyz Ubxspfx Agken Weight: 4300 kg Equipment: • 3-axis digital readout • 3-jaw chuck Ø 320 mm • 4-jaw chuck Ø 400 mm • faceplate Ø 450 mm • drive plate • fixed splash guard • cooling system • steady rest max. Ø 250 • follow rest • chuck guard • reducing sleeves • dead center • tools