Center Lathe

ZMM CU 630

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Hedpfx Aijzhx Hvs Hot Errors and omissions excepted.

Condition: excellent (used), turning diameter over bed 900 mm turning diameter over slide rest 600 mm turning length 3000 mm spindle turning speed range 11,2 - 560 U/min tool holder Multifix D1 total power requirement 22 kW weight of the machine ca. 5,6 t dimensions of the machine ca. 5,6 x 1,8 x 1,7 m Safety-related conversion according to CE standard 2017 2011 new plan pull spindle, lock case partially renewed, lubrication according to internal plan Hedpfx Aeym D H Tsi Het

Condition: new, neu Bulgarien 64180 € 1213 € 6 mm 2000 mm 315 mm 103 mm 4 mm 400 mm 11 120 MK 3 16 - 63; 63 - 250; 315 - U/Min 120 0.04 - 12 mm/U 0.02 - 6 mm/U 0.5 - 120 mm Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3310 kg driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 60780,00 turning length1.500 mm € 62160,00 turning length3.000 mm € 686,00 Hedpfeyq Sm Nox Ai Hst turning length4.000 mm € 74540,00 turning length5.000 mm € 90020,00

Condition: new, Maximum turning height: 315 mm Hedpfx Aisk Dpxlo Hst Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L Hsdpfxsk Hz Iwj Ai Hst YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Hodpfx Aioghrgus Hjt Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm Hedpfsydqpisx Ai Hst turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 1952, workpiece length 5000 mm swing dia. 1100 mm clamping length 6000 mm grinding diameter 1100 mm grinding wheel diameter 1300 mm workpiece weight 2500 kg main drive motor 22 kW crankshaft bearing diameter 275 mm steady 100-250 mm speeds of tool 400/500 U/min workpiece turning speeds 20-40 U/min weight of the machine ca. 30 t 13 Grinding Steady Rests Mandrels Mounting Flanges Hjdpfx Aoyt Rxvsi Hot Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Hodpfx Ajyfgrpji Hot Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height Hsdpfx Aowpud Asi Hst 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.