Used Bale presses for sale (211)

Condition: excellent (used), Year of construction: 2020, Austropressen AP 25 semi-automatic baler with lift-and-tilt device, built in 2020 Technical specifications: Manufacturer: Austropresse Type: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Baling: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Fpolrowifi Neav Abjg Machine weight: approx. 3400 kg Materials: Paper, cardboard, foil, metals, foams, etc. Note: The baler is in very good condition. Complete documentation is included. Please note: All technical specifications refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and revocable at any time. Viewings are possible by appointment. The sale is ex works, subject to advance payment, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Fslrav Ajvwlqqsbepg Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Baler HSM V-Press 504 waste paper press Machine in perfect condition, like new. Machine purchased from a warehouse, unused. Description: -HSM TCS (TorsionControlSystem) for controlling the inclination of the press plate Modern microprocessor control with membrane keyboard and graphic text display Suitable for both cardboard and foil Automatic start of the pressing process after closing the door Massive pressure plate and extremely stable pressure plate guide To fill the press, the upper half of the door opens to the right Door lock with knee lever for quick and safe door opening Manual bale strapping with polyester tape Pressure force: 40 kN Specific pressure force: 11.2 N/cm2 Drive power: 1.1 kW Voltage frequency: 230V / 50Hz Idle cycle time: 27 sec. Press capacity at idle speed (theor.): 3.75 m3/h Fill level: 661 mm Fslrav Ajwh Nqbsbspg Width x height of filling opening: 700 x 470 mm Bale length x bale width x bale height: 700 x 500 x 600 mm Bale weight: 60 kg Width x depth x height: 1020 x 812 x 1922 mm Weight: 290 kg Related product line: V-Press Consumable type: strapping tape

Condition: good (used), Metall baler type RETEC for sale. Fpoljwf Dbcerav Absg It is suitable for soft metals like aluminium. The baler makes cubes from aluminium that are 30x30x35 cm and weigh about 26-28 kg It can produce about 45-46 cubes per hour, so it makes about 1 ton per hour.

Condition: good (used), Manufacturer: MBT Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm Fpolrehzr U Ioav Abog

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, pressing force: 30 t, Baler paper baler Bramidan Bramin B30 W, year of manufacture 2021, weight 1640 kg, for cardboard/plastic film/paper, motor 4 kw 400 volt, pressing force 30 tons, cycle time 43 sec, dimensions HxWxD 3350x2080x1270 mm, feed opening WxH 1525x560 mm, transport height 2350 mm, machine is equipped with Bra-In App, Ser.No.437524, very good condition Folravjq Rt Ddo Abspg

Condition: used, Year of construction: 2008, Functionality: fully functional, Klanke Baler, Type KBST-110880, Year of Manufacture: 2008 Technical Specifications: Manufacturer: Klanke Type: KBST-110880 Year of Manufacture: 2008 Pressing Force: 80 t Drive Power: 2 x 30 kW Total Connected Load: 75.5 kW Capacity: max. 225 cbm/h Bale Size: 1,050 x 760 mm, Variable Length Bale Weight: 400-500 kg Baling: 4-way horizontal, automatic Fpolraewhi Utov Abog Transport Dimensions: 8,585 x 2,210 x 2,800 mm (L x W x H) Weight: 17,000 kg Accessories: 8 wire reel holders, bale chute Materials: Paper, cardboard, film, big bags, PET Operating Instructions, Electrical and Electronic Equipment Hydraulic diagrams are available in German. Note: The press is in working order. A floor plate in the press box is cracked and needs to be replaced. We also recommend replacing the chain on the twister, the hydraulic hoses, and the oil filter. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. The sale is ex-works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Folrav Ajvn Tg Iebopg Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2024, Functionality: fully functional, pressing force: 90 t, bale weight: 500 kg, filling opening width: 926 mm, filling opening length: 1,620 mm, bale length: 1,300 mm, total height: 1,100 mm, total length: 720 mm, input voltage: 400 V, overall weight: 25,000 kg, noise level: 85 dB, pressure: 280 bar, power: 55 kW (74.78 HP), input frequency: 50 Hz, Refurbished BOA baler type 2100 including BOA conveyor belt. Machine is quickly available and is currently in our production hall in Almelo. The machine is very suitable for pressing paper, plastic or other waste materials. Technical data BOA 2100: Drive: 55 kW Press force: 90 tons Cfg0U7Ih Bale dimensions: 1100 x 720 mm Bale weight: approx. 500 kg (depending on material) Number of tie-off wires: 4 vertical Technical data conveyor belt type 1500 KTH HS 32° 3000x8900: Horizontal length: 3,000 mm Ramp section length: 8,900 mm Drive: 2.2 kW / 400 V / 50 Hz Belt width: 1,500 mm Felrsvrzyqjav Abopg Effective width: 1,425 mm

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 48 t, bale weight: 550 kg, HSM VK 4812 P Year of production: 2016 Fully automatic baler. The device has undergone extensive service and maintenance work by an authorized HSM service with a branch in Germany. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Fpslravjwhvuyj Abeg Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: ready for operation (used), Year of construction: 2012, Looking for a good second-hand used machine? Then take a look at the offer of FLITS Rental & Sales. Brand: DIXI Type: 60 S Year of construction: 2012 Pressing pressure: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions filling opening: 115 cm x 80 cm deep x 55 cm high Condition: very good! Checked for operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Do you need more bundles of binding wire? Then request a free quote. FLITS Rental & Sales is your reliable partner in the sale and rental of high-quality machines for both companies and individuals. We focus on providing efficient solutions in the field of internal transport, cleaning, waste processing and working at heights. At FLITS Rental & Sales you will find an extensive range of machines that can be used in various sectors. Also look at our advertisements for: waste presses for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubbing machines for thorough and professional cleaning of floors, forklifts in various models, suitable for various working environments. At FLITS Rental & Sales you choose speed, clarity and reliability. We think along with you, respond immediately and ensure that you quickly have the right machine. You are more than welcome to come and view the machines on location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have all the time to inform you well and show you the right machines. Fpelrowgab Ujav Abeg Do you have any questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you!   Waste press Paper press Cardboard press Plastic press Waste compactor Recycling Textile press Waste Waste processing DIXI

Condition: good (used), Bramidan B 20 baler Bale dimensions - WxDxH (mm) 1200 x 800 x 800 Fpelravov Aku So Abog Feed opening WxH (mm) 1200 x 480 Pressure force 20 tons Engine (kW) 4.0 Cycle time (s) 36 / 21 Baler dimensions WxDxH (mm) 1775 x 1030 x 2790 Weight (kg) 1250 Stroke (mm) 750 Number of ties 4 Year 2014 - 2016 Bramidan X30 year 2017 price 5500eur Bale dimensions - WxDxH (mm) 1200 x 800 x 1000 mm Feed opening WxH (mm) 1090 x 655mm Pressure 30 tons Engine (kW) 4.0 Cycle time (s) 36 / 21 Baler dimensions WxDxH (mm) 1675 x 1030 x 2300 Weight (kg) 1600 Number of ties 4 BALE WEIGHT Cardboard (kg) : 275-350 Plastic film (kg) : 325-425

Condition: used, Year of construction: 2008, operating hours: 38,800 h, Functionality: fully functional, Macpresse MAC 111 / 1 baler, pressing force 170 t, built in 2008 Technical specifications: Manufacturer: Macpresse International S.R.L., Milan, Italy Type: MAC 111 / 1 Year of manufacture: 2008 Operating hours: 38,751 as of March Pressing force: 170 t Drive power: 2 x 55 kW Mains voltage: 400 V / 50 Hz Filling opening: 1,800 x 1,020 mm Press chamber volume: 2.7 m³ Bale size: 1,100 x 1,100 mm (H x W) Throughput / mixed paper: 30–35 t/h Binding: 5-fold horizontal Transport dimensions: approx. 11,500 x 2,300 x 2,845 mm (L x W x H) Fslravewgkfde Abopg Press weight: approx. 39,000 kg Accessories: Hopper, turbulator Note: The press is expected to be in operation until May 16, 2025, and can be inspected in operation upon request. The conveyor belt shown in the photos is not included in the scope of delivery. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by arrangement. Sales against advance payment are ex works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, Functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Fpslravou Thgze Abjg Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2005, Functionality: fully functional, pressing force: 90 t, bale weight: 600 kg, filling opening width: 1,620 mm, filling opening length: 972 mm, bale height: 1,100 mm, bale width: 720 mm, overall weight: 31,000 kg, noise level: 85 dB, pressure: 300 bar, power: 175 kW (237.93 HP), BOA baler with double pre-press valves available in a fully overhauled condition. The machine is located in our workshop in Almelo and can be viewed by appointment. A matching conveyor belt (new) can be produced if necessary. The machine is equipped with a so-called refu-ram. This is perfect for pressing materials such as plastic bottles and/or shredded RDF. Technical data: Drive: 2x 55 kW Pressing force: 90 tons Bale dimensions: 1100 x 720 mm Fpjlov Ifagerav Abjg Bale weight: approx. 600 kg (depending on material) Number of tie-off wires: 5 vertical

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 413.00.003, pressing force: 60 t, bale weight: 400 kg, TECHNICAL DETAILS Pressing force: 60 t Main drive power: 9.0 kW Feljwhqf Tsrav Abspg Bales Bale dimensions (W x D x H): 1,100 x 1,100 x 800 mm Bale weight: max. 400 kg Binding: 4-fold vertical MACHINE DETAILS Machine dimensions (L x W x H): 6,500 x 1,850 x 2,800 mm Weight: approx. 8,000 kg Electrical system Operating voltage: 400 V Frequency: 50 Hz Total connected load: 28 kW Regular maintenance keeps the baler in good working order.

Condition: ready for operation (used), Year of construction: 2009, Looking for a good second-hand used machine? Then take a look at the offer of FLITS Rental & Sales. Brand: HSM Type: V-press 860 PLUS Year of construction: 2009 Press pressure: 532 kN Voltage: 400 Max. bale weight: 430 kg (depending on the material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Fill opening dimensions: 120 cm x 65 cm x 85 cm Condition: very good! Checked for operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires). Do you need more bundles of binding wire? Then request a free quote. FLITS Rental & Sales is your reliable partner in the sale and rental of high-quality machines for both companies and individuals. We focus on providing efficient solutions in the field of internal transport, cleaning, waste processing and working at heights. At FLITS Rental & Sales you will find an extensive range of machines that can be used in various sectors. Also look at our advertisements for: waste presses for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, scrubbing machines for thorough and professional cleaning of floors, forklifts in various models, suitable for various working environments. Fpslrav Aowgaawebjg At FLITS Rental & Sales you choose speed, clarity and reliability. We think along with you, respond immediately and ensure that you quickly have the right machine. You are more than welcome to come and view the machines on location. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. A visit is possible by appointment, so that we have all the time to inform you well and show you the right machines. Do you have any questions or would you like to receive a no-obligation quote? Please feel free to contact us: We are happy to help you! Waste press Paper press Cardboard press Plastic press Waste compactor Recycling Textile press Waste Waste processing

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic pressing system with a pressing force of 60 tons, designed for economical reduction of the volume of (recyclable) waste in industry and crafts: Cardboard boxes Foams PET bottles Insulating mats and other pressed materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: Pressure:, 60 tons, Unit pressure:, 6.81 kg/cm², Power supply:, 400V / 7.5kW Beam dimensions:, 800x1100x1200 mm, Fjlraera A E Ujv Abjpg Number of ties:, 3 Beam weight:, approx. 370-410 kg, Tie:, manual Loading opening:, 990 x 1110 mm, Machine weight:, 5420 kg Average pressing cycle:, 47 sec Year of production:, 2011-2016

Condition: good (used), Year of construction: 2016, operating hours: 287 h, Functionality: fully functional, HSM baler, type HL 7009 Re, with lift-and-tilt device, built in 2016 Technical specifications: Manufacturer: HSM Type: HL 7009 Re Year of manufacture: 2016 Operating hours: 287 Pressing force: 70 t Specific pressing force: 58 N/cm² Cycle time of the lift-and-tilt device: 17 s Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Baling: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard Slide Note: Fpolrswff Aujav Abeg The machine is in very good condition. A new, original HSM main cylinder has been installed. The press was inspected and tested by us in 28816 Stuhr, Germany. The video can be found on our website or our YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your equipment for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: good (used), Year of construction: 2000, operating hours: 32,169 h, Functionality: fully functional, pressing force: 60 t, bale weight: 750 kg, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology with personnel protection system, baling press, bale chute and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Felrav Aeviwdmsbjpg Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor with personnel protection system 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 1 bale chute 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2012, Tested, cleanded, full service was made. New oil. Fjlraverxfn Us Abepg We have two Orwak 5030 balers. Last photo - green, refurbished 2017 - 2000 Eur.

Condition: good (used), Year of construction: 2017, Roll compactor/press that compresses cardboard, film, paper trimmings, punched grids, etc. into rolls – used –: Price ex-works: only €2,250 (net)! Manufacturer: Welger Model: Roller Compactor Type: RV-641-A1-400V Year of Manufacture: 2017 Device / System No.: 3017-139 Item No.: 011641002 Length: 1490 mm Width: 900 mm Height: 1750 mm Weight: 540 kg Bale diameter up to 400 mm Bale length: 600 mm Bale weight, depending on bale material: up to 30 kg Balance, depending on bale material: 250 - 400 kg/m3 Performance/Throughput: up to 300 kg/h Feed speed: 0.36 m/s Binding material: 23 µm stretch film Roll diameter: 250 mm Film width: 580 - 600 mm Binding and bale ejection: Semi-automatic Pressing materials for the RV 641:  Cardboard  Punched grids  Paper edge trimming (strips and continuous)  Paper and film bags  PP film edge trimming  PE film (large-format)  Film strips Folrav Aswani Tsbspg  Clothing protection film (PP/PE film)  Plastic strapping bands  PP/PE fiber material  Insulation and nonwoven materials  Foam grids  Packaging foam  Aluminum foil/hop bags  Textile wadding  Gray cardboard (solid)  Tetrapak  Big bags Power supply: 3x400V/AC, 50/60Hz. 16A Control voltage: 24V Mobile and compact design Roller compactors easily compress bulky material into cylindrical bales in the smallest of spaces. Condition: good – very good Available: immediately Location: Braunschweig

Condition: good (used), Year of construction: 2016, Dixi 80 SLD baler, with lift/tilt device, semi-automatic, built in 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Fjlowcnrysrav Abspg Bale weight: approx. 500-600 kg Tying: 3-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, carton The operating instructions and EC Declaration of Conformity are available in German. Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr, Germany. The video can be found above with the images, or on our website or YouTube channel. Inspections, including live inspections, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a fee. We are happy to answer any questions about the machine by phone Monday through Thursday from 8:00 a.m. to 2:00 p.m. On Fridays, we are available from 8:00 a.m. to 1:00 p.m. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. Sales against advance payment are ex works, without warranty or guarantee.

Condition: like new (used), pressing force: 3 t, Professionally refurbished, tested, new oil, new bale trolley, strap rolls. 3 Tonnes press force Fpslrasr Ik Azjv Abjg Bale weight (kg) approx 30-60 Dimensions WxDxH (mm) 845 x 745 x 1965

Condition: as good as new (ex-display), Year of construction: 2021, Baler in perfect condition as new. PRESS FORCE Fslrav Aeh Rx Edobjpg 5 ton, 50 kN BALE WEIGHT (kg) Cardboard: 80-110 | Plastic: 90-130 BALE SIZE (mm) 1000 x 650 x 700