Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Fgedpoxy Tmnsfx Akvjb

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Fsdpfx Aexy Tlwjkvsgb

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Machining Center Rover 20 Fgsdpfxelc Dwnj Akvsb Working area 2,893 x 950 mm, Milling spindle with ISO30 tool holder, 3.6 kW, Drilling unit with 10 vertical and 6 horizontal drills, as well as slot saw, 6-position tool changer, The NC410 control featured a floppy disk drive and color monitor, along with basic, graphically assisted programming capabilities. Additionally, the Rover 20 already supports pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 Located at site Transport available at extra cost

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 - Milling dimensions: - X = 3,514 mm - Y = 1,544 mm - Maximum machining dimensions: - X = 3,868 mm - Y = 1,746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in the X-axis, 6 in the Y-axis - Individually selectable - T-shape arrangement - Maximum drilling diameter: 35 mm (depending on panel thickness) - Spindle extension stroke: 70 mm - Alternating right- and left-hand rotation - Infinitely variable spindle speed: n = 4,725 rpm - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - Pneumatically swiveling to 90° - n = 5,300 rpm - Tool holder: A Ø = 200mm, I Ø = 30mm, B = max. 3.5mm - Sawing/grooving in X and Y directions Fsdpfxox Enpqo Akvegb - Milling unit 7935: - With 6 kW, water-cooled spindle - Milling unit 7982: - For lock case routing - Tool changer 7996: - 18-position carousel magazine - Vacuum pump with 140 m³/h - Handheld control unit - PC control with TwinCAM WOP system - Siemens control system Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. Fgsdpsy Ih Rgefx Akvsb - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Console machine (6 units) Travel dimensions: X = 3490 mm Y = 1690 mm Z = 205 mm Machining dimensions: X = 3050 mm Y = (Max. milling dimension - tool radius) 1345 mm Z = 150 mm Drilling head TF 20 Power: 2.2 kW 8 vertical spindles, spindle spacing 32 mm in X 6 vertical spindles, spindle spacing 32 mm in Y 2+2 horizontal spindles in X 1+1 horizontal spindles in Y with integrated grooving saw blade 120 mm with electro-milling spindle 9.2 kW with ISO-30 interface with C-axis with angle aggregate with 12-position tool changer with tool change station for angle aggregates with vacuum pump 80-100 m³/h Total connected load: 16 kW Compressed air: 6 bar Compressed air consumption: 210 NL/min Extraction nozzle: 250 mm Extraction volume: 5300 m³/h Extraction speed: 30 m/sec Fedpoy Ih Rmjfx Akvegb Dimensions: 5940 x 3800 x 2510 mm Weight: 3700 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base Fgedpey Hl Iyefx Akvjb N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Fgedpfx Aksy Nkytovjb Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Fsdpfx Akjwuz N Nevogb Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Fgedpoy Nkwrofx Akvob Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007087, X axis working area: 4300 mm Fgsdpfx Aksy Nkrvjvjb Y axis working area: 2200 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 30

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Fedpfx Aey Nkpuskvjgb Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8 Fsdpfx Aju N Skfskvogb

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Fgsdpfx Aksw Dcccevsb

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Fgjdew Dcb Sepfx Akvsb

Condition: used, machine/vehicle number: 007247, Maximum edge height: 3 mm Fgodpfx Akst H Twysvjb

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Fjdpfox A Tk Sex Akvsgb Total number of drilling spindles: 28 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Fodpfx Ajwcyacskvegb Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 008359, X axis working area: 2500 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Fjdpfex Swcaex Akvsgb Total number of drilling spindles: 16 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Fgedjvctlgopfx Akvob Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block Fgjdpey Nb Tksfx Akvsb (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Fgsdpfxjy Eylws Akvob Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Condition: excellent (used), Year of construction: 2011, 4-AXIS MILLING AND ROUTING CENTER LOADER FOR 9 TOOLS Brand: POUWELS Model: DEF 1000 Type : SPEEDO Serial number: 135 Year : 2011 (Machine deployed and visible in our workshops by appointment) The DEF 1000 router is designed for routing all types of wood parts exclusively. It is specialized for staircase manufacturing. MACHINING CAPACITIES : Movements (machining strokes) : - X travel: 6000 mm (option installed) Y movement: 1000 mm Vertical movement (Z axis): 380 mm - Maximum travel speeds : X axis: 75 m/min Y axis: 75 m/min Z axis: 30 m/min Fedslc Hzwopfx Akvegb - C axis rotation: -90 +90°. MACHINE COMPOSITION - Control panel Windows 7 Pro computer - Ethernet hub - Manual or programmed control mode : Pouwels Prostair program direct link Autocad 2008 Control system: Num 1050 Digital Drive - 3-axis routing heads 7.5 kw - 0 to 24000 rpm - Horizontal routing head with rotation ( C axis ) 7.5 kw - 24000 rpm - Fixed side tool changer for 9 HSK63 F tools ER32 collets OTHER FEATURES : - Power supply : 400v Three-phase+N+T - Installed power: 15 kW In Max 37.5A - Suction cups Ø180mm and Ø120 h.70mm - One vacuum pump 170 m3/h - Pneumatic supply: 8 bars - CE standards - Suction: centralized outlet Ø 250 mm - Recommended flow rate: 8000 m3/h (5500 min.) Overall dimensions 8300 x 3500 x 2050 mm Weight 8560 kg Please consult us for the supply of consumables, accessories and/or vacuum systems. Machine offered as is. Prices ex-store. Delivery and additional services on request.

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Fjdsrz Irrjpfx Akvegb Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: ready for operation (used), Year of construction: 2014, The HOLZ-HER EVOLUTION 7405 is a compact yet powerful vertical CNC machining center that delivers complete machining in a single setup—with precise milling on all four edges for perfectly finished parts. The machine processes materials from 8 to 70 mm thick and up to 3200 mm in length, while taking up minimal floor space, making it an extremely flexible and efficient solution for modern furniture and woodworking production. Brand: Holz-Her Model: Evolution 7405 Year of manufacture: 2014 Stock No.: 2002879BXA TECHNICAL DATA Machining dimensions Maximum material thickness: 8 – 70 mm. Vertical through-feed (width): 1,200 mm. Length: Unlimited (1,500 mm without repositioning). Minimum workpiece: approx. 200 x 70 mm. Working dimensions (X, Y, Z) Max board size (without additional support): X: 3,200 mm Y: 920 mm Z: 70 mm Minimum workpiece size: X: 200 mm Y: 70 mm Z: 8 mm Maximum machining In the X direction (without re-clamping): Circular milling/formatting (excl. milling radius): 1,450 mm Fgjdpjyxbv Rjfx Akvsb Complete machining (milling, drilling, milling groove): 1300 mm In the Y-direction: 920 mm Performance & Spindle Spindle power: 7.5 kW (4-axis) / 6.5 kW (standard) / 10.3 kW (optional) HSK mounting. Tool changer: 6-position (standard on 4-sided). Spindle speed: Variable, high-performance. Vector speed: 68 m/min. Features & Equipment 4-sided machining: Complete formatting and edge profiling. Drilling unit: Standard with milling spindle and drill head. Vacuum system: Intelligent, automatic positioning of suction cups. Control system: CAMPUS/NC Hops. Requirements Floor space: Less than 5 m²