Used Debarkers for sale (59)

Condition: used, Year of construction: 2013, EngineCAT C18; 600 hp / CAT C18; 447kW Machine Length44' 11" / 13.69m Weight98,000lbs / 44,452kg Dslqx Sjwhw Smjaujut Fuel Capacity330 gallons / 1,249 liters Drum Configuration Flail Drum - Width: 60" Diameter: 40" / Flail Drum: Width: 1.5m Diameter: 1.01m

Condition: reconditioned (used), Round wood debarker CAMBIO 45. Equipped with a AIR TEN rotor. Knife system CAM TOOL. The debarker will be sold after an overhaul. Can be sold as part of a debarking line. Dujlqsiqkldex Sauot

Condition: used, Year of construction: 1996, Diameter: 8-55 cm Duelqjwhiqhex Sauet Feed rate: up to 90 m/min.

Condition: excellent (used), Functionality: fully functional, A debarking rotor has been overhauled, with new rotor bearings, new knife systems, and many new spare parts. Included is a used debarking rotor for dismantling. Dslqx Saewh Smxsujut

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 Djlqx Sajtrd Hfeueut - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: reconditioned (used), Functionality: fully functional, The VK550 two-rotor machine can be equipped with 480 mm or 620 mm rotors (alternatively, one rotor can be a reducer). It comes complete with a feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Duelqowfp Saox Sauot

Condition: good (used), Year of construction: 1990, I will sell a VK 16 debarker, good condition, the line includes: 1. VK16 debarker. 2. Side feeder. 3. Longitudinal feeder. 4. Rear receiver with discharge. 5. Wood box, working diameter 6-36cm Dujlqx Saowgh Hxsuot

Condition: used, Year of construction: 2022, Functionality: fully functional, feed rate Y-axis: 700 m/min, Log peeler CAMBIO 45 AIR TEN. The peeler is sold after a major overhaul. 4. Bark conveyor. 5. Centering conveyor. 6. Log peeler CAMBIO 75, knife system CAM TOOL. 7. Additional rollers after the peeler. Delqstcu Uajx Saueut

Condition: used, Used log yard, complete with debarking and reduction system Duolewfnv Dsqx Sauet - Cross-feed, singulation Electrical system and motors replaced in 2016 - Log infeed, 40 m long Frequency-controlled motors for smooth start and stop Chain approximately 3 years old - Root reduction and debarking system, manufacturer HAEWA Mill, 1000 mm long Root reducer with automatic operation Debarking with manual control - Log diameter and length measurement - Vibrating chute and conveyor belts for waste disposal !! Sold on behalf of a customer!!

Condition: used, Year of construction: 1970, Functionality: fully functional, Fully functional debarking system Max 62cm Dujlqx Ssv Dh U Ssaust Min 15 cm With tilting table Solidly built feeder table Very well maintained This system is still in operation and can be inspected at any time. The reason for selling the system is a new purchase

Condition: excellent (used), Year of construction: 1999, 1. Baljer Zembrod Milling Head Debarker Dolqxev R Ea Ss Saujut -Built in 1999 -Heavy-duty 4-strand log feeder cross conveyor -Debarking carriage -Milling head -Planing head for cleaning -Root reducer -Operator cabin -Rails -Ejection boxes

Condition: reconditioned (used), Functionality: fully functional, The VK820 single-rotor machine is equipped with an 800 mm rotor and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished by our workshop and is in excellent working condition. Alternatively, according to a client's needs, the rotor can be changed to another one (480/620). Duslqx Sowfdi Hjaujt

Condition: new, Year of construction: 2025, - Dimensions 600 x 3,000 mm - M 56 conveyor chain with protective rollers and MS flights - 2.2 KW SEW gear motor for the feed chain drive - Automatic centering of the logs to the center of the rotor - Dimensions 1,500 x 4,500 mm - Machine for 6 - 35 cm logs - 18.5 KW drive motor for the rotor - 4 pre-cutters - 4 main cutters Delju Rpibeqx Saueut - each with hydraulic pressure system - 1 pair of centering rollers in front of the rotor - 1 centered pair of rollers after the rotor - 4 KW SEW geared motor for driving the rollers - 30 m/min feed speed - 1 pair of non-driven rollers in the pull-out

Condition: excellent (used), VK450 2RE log peeler.Equipped with two rotors. One is a stump rotor. The other is the peeling rotor. Min-max tree diameter 8-45 cm. Duolqxoulv Hzj Sauet Min tree length 3 m. Complete with original VK centring conveyor. To be sold after overhaul.

Condition: reconditioned (used), Totally renovated Cambio 75 debarker with 5 knives airten rotor and brand new hydraulic dampers Duolencfrzeqx Saujt

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor Dujlqefn Iu Iox Saust with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Year of construction: 2020, Condition: new, Häwa root reducer NEW Type H 276 / 800 Stem 0.2m - 1m (root run 1.2m) Trunk length min 2,4m - 5m ( also longer possible ) Dujlqefccp Hox Saujt Total weight 5t Total connection 45kW with radio remote control

Condition: used, Year of construction: 1987, machine/vehicle number: 1088, Hello, I have a Valon Kone VK26MX debarker from 1987 for sale. The advert includes what is in the pictures, i.e. the debarker, the centering feeder and the wheels that receive the goods. Of course, the set includes a 45 kW engine driving the debarker, which is dismantled in the pictures. Please contact me by phone. The price given is for export Dolqx Saev Dulksusut

Condition: ready for operation (used), - Rotor motor 15 KW - 8 pc. knife mounted on the rotor - min. log length 2.1 meter Duslqxev E Hkzs Saust - working diameter 60 - 360 mm - feed speed 28 meter/ min. - including chain infeed table with sep. motor

Condition: used, Functionality: fully functional, Centre conveyor and additional rolls for the CAMBIO log peeler. Delqx Sovcl H Asaueut

Condition: as good as new (ex-display), Functionality: fully functional, Debarking machine Valon Kone 26 MX - About 6000m3 debarked with the machine - Built as a prototype - Frame extended and additional support rollers added for debarking longer material - Debarking input automatic - Equipped with two frequency converters to adjust the speed - Ready for OmronSysac or other measuring device - Platform/undercarriage built in 1991 - Crane Epsilon 21TM/year -91 - Renovated in summer -23 - Machine/plant weight: 27 tons - Length: 15 m - Combination length 22m when transported. Also included: Scania 143 - Year 1991 - Air suspension on rear axles - Robson - Registered as a work machine Aggregate: Stamford 250 kw/Perkins 2000 series 340 hp Dolqx Souhcf Ijausut - Hours of use, about 4000h - Perfect condition

Condition: refurbished (used), HÄWA debarker -reconditioned-- -type H249 / 800 -Carriage made of a heavy welded steel construction Dolqxervim Ho Sauout -5 pairs of main drive wheels -Hydraulics for ejector -milling arm made of heavy steel construction, pneumatic -pneumatic milling head, working width 300mm, beater bars, beater blades and overrun ring -Milling head carbide tipped -Type H 249 / 800 -main drive wheels 800mm -log diameter 0.2m - 1.0m -log length 2.0m - 6.0m ( also longer ) -total connected load 32kW -With control panel

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. Duolqehkh Hxsx Sauet The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN.

Year of construction: 2016, Condition: used, Haewa / SMS Fraeskopf debarker Trolley made of a heavy welded steel construction 4 pairs of main drive wheels 1 split, toothed pair of main drive wheels Log drive with 2 speeds Hydraulics for ejector Frame arm made of a heavy steel construction cutter head: working width 300mm, beater bars, beater knives and overrun ring Milling head carbide tipped Hydraulic lowering of the milling head Duslscrp Akoqx Saust carriage drive frequency controlled, v = 0 - 60 m/min Type H 249 / 800 Master drive wheels 800mm log diameter 0,2m - 1,0m trunk length 2,0m - 6,0m ( also longer ) Total connected load 35kW With control panel

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of Delqxeiqi S Nj Sauout 1. Table for unbarked logs 2. Hydraulic log splitter. 3. Feed conveyor. 4. Scraper bark conveyor. 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new