Condition: used, Multi-spindle head, multi-spindle drill head, dowel drill head, fitting drill head Febeb A I Ulo Eq Uqhspg -Dimensions: 190/85/75 mm -Bore distance: 26 mm -Middle drill: 5 mm offset -Number: 1x drill heads available -Price: per piece -Weight: 2 kg/piece

Condition: used, Bit mortiser 380V Fpsb Eq Usr Iqixsqheg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Fpsb Eoui Ebheq Uqhsg Pluging: Three-phased Power: 1,5 Kw Motor: 2 CV Overall dimensions Lenght: 1200 mm Width: 1250 mm Height: 1650 mm Weight: 350 Kg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, drilling depth: 70 mm, input voltage: 400 V, workpiece height (max.): 65 mm, input frequency: 50 Hz, power: 1.47 kW (2.00 HP), The FD 921 is equipped with 21 drilling spindles in a 32 mm grid. Drills up to Ø 35 mm can be used to drill dowel holes, row hole drilling and cup hinges. The large table made of gray cast iron, side stops, pneumatic workpiece clamps and ergonomic controls make the FD 921 a top-class dowel drilling machine. Further technical data: Number of drilling heads: 21 (11 right-hand, 10 left-hand) Axis distance between the drilling heads: 32 mm Max. workpiece size: 850x3000 mm Required air pressure: 6-8 bar Fpjb Eq Uevyd Itjqhog Accessories: 11 tool holders with 5 mm dowel drills, right-hand cutting 10 tool holders with 5 mm dowel drills, left-hand cutting

Condition: used, length: 1.800 mm width: 1.100 mm height: 1.200 mm division: 32 mm Number of drills: 26 Feb Eq Ujt Sbc Ijqhspg engine: 1,5 kW Gannomat hole drilling machine for drilling dowel holes or rows of holes in workpieces.

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Drive: 1.5 / 2.0 kW Fpsb Eq Uqjcuh D Rshsg -Drill speed: 2200/4400 rpm -pneumatic workpiece clamping -15 drill bits from below, grid 32 mm -Bore head: swiveling -Foot switch -Bore depth: max. 185 mm -Height adjustment: max. Mm -Max. Clamping height: 110 mm -Dimensions: 950/1100 / H1350 mm -Weight: 616 kg

Condition: ready for operation (used), Technical characteristics 5 inferior heads Variable inter axis value Feb Eorfr Nisq Uqhepg Hydro pneumatical Max length 3500 mm Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: used, Engine: 1.1 kW // 2,700 rpm. * Foot operation. Fpeb Eq Uelfcnwjqheg

Condition: used, Fittings drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drills -Drill distance: 32 mm (other multi-spindle heads available) Fsb Esb A Hd Hoq Uqhepg -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240kg

Condition: ready for operation (used), Technical characteristics Semi-automatic 13-spindle multi-spindle drilling machine Distance between chucks : 32 mm Center distance between first and last chuck : 384 mm Max. drilling depth : 75 mm Spindle speed : 2800 rpm Cast-iron table 600 x 400 mm Max. workpiece dimensions : 600 x 3000 mm 1.5 hp motor 1 vertical pneumatic presser Cycle start with foot pedal Operating pressure 6 bars Power and Motors Voltage: 380 V Pluging: Three-phased Power: 2 Kw Motor: 1,5 CV Overall dimensions Fpob Eq Uqettdm Djhjg Lenght: 750 mm Width: 560 mm Height: 1200 mm Weight: 160 Kg

Condition: used, table width: 1.080 mm division: 32 mm Hole drilling machine or dowel drilling machine Dübelfix for drilling dowel holes or rows of holes in workpieces. Febetuv Iys Eq Uqhjpg Table width: 1,080 mm Pitch: 32 mm

Condition: used, Drill stand, drill stop, drill press stand, drill jig, drill bushing jig Fsb Eq Usd Rh Rcjqhopg -Quick release device -Max. Height: 100mm -Dimensions: 400/240/H220 mm -Weight: 22 kg

Condition: ready for operation (used), Technical characteristics multi-spindle drilling head (7) 3-axis manual orientable stroke 125 mm 4 manual length stops pneumatic cycle pedal control worktop height 900 mm Caractéristiques-perçagePneumatical adjusting cyclesPedal command Power and Motors Power: 2.2 Kw Overall dimensions Fjb Estx Hxpsq Uqhepg

Condition: used, Dowel drilling machine, dowel drilling machine, drilling and dowel station, row of holes dowel drilling machine, knothole drilling machine, row drilling machine, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -Workpiece clamping; pneumatic Fjb Eqsf Dlurs Uqhspg -Number of drills: 21 pieces. 32 mm grid -Bore head: swiveling -Bore depth: max. 80 mm -Height adjustment: max. 80 mm -Underframe: transport castors that can be steered on 4 pieces -Dimensions: 1090/1330 / H1460 mm -Weight: 433 kg

Condition: ready for operation (used), Technical characteristics Power and Motors Fpsboryt A Is Eq Uqhsg Overall dimensions

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine Fobob A Rmge Eq Uqhjpg -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available -Price: per piece -Dimensions: 470/120/H150 mm -Weight: 7 kg/piece

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : Fjb Eqsk Rticj Uqhepg An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: used, Quills, processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. Feed: stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill machining units available -Price: per piece -Weight: 25 kg/piece Fob Eq Ujb A Iiaoqhepg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Fpeb Eq Uqetqq Hpjhjg Overall dimensions Lenght: 1142 mm Width: 800 mm Height: 1140 mm Weight: 300 Kg

Condition: used, Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 8x drill heads available -Price: per piece -Dimensions: 700/120/H150 mm Fpob Eqjb A Rtts Uqhjg -Weight: 11 kg/piece

Condition: ready for operation (used), Technical characteristics Drilling, hinge fitting and fixture fitting Head rotation for 3-spindle drilling Adjustment stop Vertical drilling unit with 7 spindles at 32 mm centres Pneumatic raising/lowering 0.75 kW (1 hp) motor Pneumatic pressers Power and Motors Voltage: 380 V Pluging: Three-phased Power: 0,75 Kw Motor: 1 CV Fpob Eq Uorfr Nfeqhjg Overall dimensions

Condition: used, Processing unit, automatic drilling machine, drilling machine, floor drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 1.1 kW -Speed: l 2665 rpm -Thread recording -Adjustable drilling distance: 15-65 mm -Number: 2x processing units available -Price: per piece -Weight: 23 kg/piece Febjb A Tcps Eq Uqhopg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Fpjbott Hw Te Eq Uqhsg Power: 2 Kw Motor: 2,5 CV Overall dimensions Lenght: 800 mm Width: 900 mm Height: 2000 mm

Condition: used, Wood step drills, wood drills, countersinks, end mills, drill holders, click quick-change chucks -for: Line drilling machine, fitting drilling machine -from: a wood workshop Fsbjb A Rbmo Eq Uqhopg -15 kg: milling cutter, drill bit, countersink, click quick-change chuck

Condition: ready for operation (used), Technical characteristics 4-head CN drill transfer at the end of the tenoner Fsb Eq Uort Sapsqhspg can be part of a production chain Power and Motors Overall dimensions