Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm Dusdpjb Iqf Njfx Agdel -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: used, Grinding Dust Extraction Table SAT Type SATp2 Length A: 2100 mm, Length B: 1770 mm Duodpfx Aewixrdjgdjl Filter area: 17.6 m² Motor: 2.2 kW Weight: 295 kg Mobile

Condition: new, Catalogue number x0192 TECHNICAL DATA Max. capacity 14600 m3/h Max. compressed air pressure 4500 Pa Motor 15 kW Speed 2800 rpm Metal impeller 6 blades Extraction port diameter 325 mm Dimensions (L/W/H) 900/880/1050 mm Weight 265 kg – New device Option to purchase a reduction adapter at an additional cost. Dsdpfx Ajx Swrzegdeul Net price: 9600 PLN Net price: 2290 EUR (based on the exchange rate of 4.2 EUR) (Prices may change subject to significant exchange rate fluctuations)

Condition: used, Year of construction: 2012, used extraction unitYear of manufacture: 2012Rated capacity: 2789 m³/hFilter surface: 1.8 m²Max. negative pressure: 1668 PaChip collection volume: 160 lMotor: 1.1 kW, 400 VExtraction port: 1 x 120 mm, 1 x 100 mmAvailability: short-termLocation: Hochheim Dodpjx Rv Dtsfx Agdjul

Condition: excellent (used), Servatechnik extraction Djdpfjx Nbnnex Agdjul

Condition: repair required (used), Extraction system with Nestro briquetting press Untested - In need of repair Dujdpfoxy Agkjx Agdsl Therefore, being sold at a very low price. Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Nedermans, Dust extraction blower exhaust fan 500725 -Motor: 0.37 kW 3000 rpm -Fan wheel: Ø 290 mm -Connection: Inlet Ø 130 mm -Connection: Output Ø 120 mm Dodpjhprg Ajfx Agdsul -Dimensions: 540/420/H520 mm -Weight: 24 kg

Condition: good (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, filter area: 5.31 m², volume flow: 1,400 m³/h, negative pressure: 2,210 Pa, nominal flow rate: 884 m³/h, overall weight: 205 kg, total width: 830 mm, total length: 1,100 mm, total height: 1,600 mm, input voltage: 400 V, noise level: 71 dB, extraction nozzle diameter: 125 mm, tank capacity: 165 l, Return device with slight signs of wear. Serial number: 125PM2246040001 Year of manufacture: 2022 Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for vacuuming and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Dujdpfx Aswgz T Sjgdel Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the Chip container due to large filter surface Filter description Ultra-compact with maximum filter surface Filter material made of aluminum-coated polyester fleece, resulting in a long service life Filter comes standard with an antistatic design, tested and approved according to category M-BIA The fan is installed downstream of the filter If a warranty is stated in the item description and/or in the description of the scope of delivery, this does not affect your statutory rights against your seller. Please refer to the warranty conditions for the scope, duration, contents, and the guarantor. We assume no liability for printing errors, mistakes, or incorrect representations. Technical and visual changes are reserved. Some images show optional accessories. Delivery is subject exclusively to our terms of delivery and payment. Sales are made through specialist retailers.

Condition: new, Year of construction: 2025, New machine Duodpex Rpfwofx Agdjl Year of manufacture: 2025 Equipment as per order confirmation A2024-????

Condition: good (used), High-pressure centrifugal fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Fan and plate: made of stainless steel Duodjf T Snvopfx Agdel -Motor power: 2.2 kW -Speed: 1440 rpm -Diameter fan: 550 mm -Quantity: 3 pieces available -Price per piece -Dimensions: 570/625/H625 mm -Weight: 74kg/piece

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 210PM2219030008, type of input current: three-phase, filter area: 22 m², total height: 1,800 mm, total width: 830 mm, total length: 1,717 mm, overall weight: 290 kg, nominal flow rate: 2,262 m³/h, input voltage: 400 V, extraction nozzle diameter: 200 mm, noise level: 72 dB, power: 3 kW (4.08 HP), input frequency: 50 Hz, tank capacity: 2,165 l, Used system with slight damage/scratches on the machine housing. There is still some fine dust in the machine. Serial number: 210PM2219030008 Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with little space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, making it flexible to use Large inspection openings Large-sized, mobile chip containers with clamps and chip collection bag Dust extractor already fully assembled when delivered, making it quick to use All models mobile For model RLA 210: Optimal chip distribution in the chip containers due to large Filter area Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminum-coated, thus with a long service life Filter tested and approved as standard in antistatic design according to category M-BIA The fan is connected downstream of the filter Unit of measurement: piece Dujdpfx Asvu Dcyjgdsl Packaging unit: 1 Metal fan wheel Inspection opening for cleaning the bypass filter Connection cable 5 m with 5-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Pre-equipped for connection of machine detection for up to 8 machines and slide controls Machine detection via potential-free contact Pneumatic cleaning (compressed air connection via standard plug, working pressure 4 - 6 bar)

Condition: used, Used paint mist extractor with 2 side baffles with 2 fans otherwise as shown in pictures Dodpfx Aewka Nasgdjul Availability: Short term Storage location: Röllbach

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Dsdsffphbepfx Agdeul -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter Dedefff Niopfx Agdsul -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel Dujdjd A U Rkjpfx Agdol -Dimensions: 1575/1275/H175 mm -Weight: 50 kg

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Dujdpfxeffphco Agdel -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm Dsdpfx Aocba T Degdjul -Weight: 38 kg

Condition: good (used), Extraction slides, ventilation duct slides, slides for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap -Material: Steel sheet Duedpfecba Txjx Agdel -Quantity: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm Dujdjcba T Ajpfx Agdjl -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system -Manufacturer: MEP, extraction system with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base: on wheels Dsdpfx Ash Szarjgdeul -Dimensions: 950/480/H1860 mm -Weight: 40 kg

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, suction, chip blower Dujdpfjrz Szaox Agdel -Manufacturer: Spänex, mobile filter system -Motor: Siemens 0.75 kW -Speed: 2850 rpm -Connection input: Ø 140 mm -Base: on wheels -Dimensions: 680/680/H2290 mm -Weight: 60 kg

Condition: used, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction blower, fan, extraction, chip blower -Handover: in its current state as inspected, without filter element -Manufacturer: Höcker -Motor power: 1.5 kW Dusdef D Azhjpfx Agdol -Speed: 2870 rpm -Inlet connection: Ø 147 mm -Outlet connection: Ø 515 mm -Base frame: on casters -Dimensions: 610/1100/H1405 mm -Weight: 68 kg

Condition: good (used), Year of construction: 1986, Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Centrifugal fan, chip extraction fan, fan, suction, chip fan -unfortunately no funding data available -Motor: MEZ type 4AP80-2 -Motor power: 1.1 kW -Speed: 2840 rpm -Connection input: Ø 60 mm -Outlet connection: Ø 400 mm -Base: on castors Dedpfx Agofxx Nnedeul -Dimensions: 940/540/H1510 mm -Weight: 74kg

Condition: good (used), Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, HEPA filter -Manufacturer: KMA, Exhaust air purification system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos Djdpjlb Iv Eefx Agdjul -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Radial fan in galvanized housing with sound insulation Dodpjb A H Raefx Agdeul -Engine power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm -Outlet connection: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg