Condition: excellent (used), Year of construction: 2002, FAVRETTO TANGENTIAL GRINDING MODEL MB 130 MAXIMUM GRINDABLE LENGTH 1300 mm MAXIMUM GRINDABLE WIDTH 500 mm MAXIMUM GRINDABLE HEIGHT 550 mm MSX DIMENSIONS GRINDING WHEEL 400x100 mm ELECTROMAGNETIC PLATE 1300 x 400 mm COOLANT TANK HYDRAULIC CONTROL UNIT AUTOMATIC DIAMOND CUTTING MACHINE USE AND MAINTENANCE MANUALS Dcjlieu E I N Aokyllsg CE CERTIFICATION

Condition: excellent (used), The machine is in very good condition and has various accessories. Dcslikylowgwpijlsg

Condition: good (used), Year of construction: 1999, Functionality: fully functional, GENERAL Project No: 905670 Quantity: 1 pc. Manufacturer: TACCHELLA Type: Elektra 1018 MPC Control: MPC Year of Manufacture: 1999 Condition: Used Machine Shifts approx.: less than 1 shift DESCRIPTION CYLINDRICAL GRINDING Max. grinding diameter 350 mm Max. grinding length 1000 mm Centre hight 180 mm Centre distance 1000 mm GRINDING SPINDLE UNIT Travel in X/Z 350/1180 mm Max. rapid traverse in X/Z 10/10 m/min Grinding head manual swivel-type Belt-driven grinding spindle for external grinding wheel RH with max. diameter x width x bore 400x50x127 mm LH with max. diameter x width x bore 450x80x203 mm Max. circumferential speed 35 m/s2 Max. power at 10-40/100 duty ratio 7,5 kW Reception MK5/ASA4 TAILSTOCK Tailstock manually slidable Tailstock quill reception MK4 Cylinder fine adjustment tailstock manual Dressing device with dressing plates on tailstock FURTHER EQUIPMENT Dceleuk Imdoikylljg Prepared for In-process measuring system Touch sensor Fully enclosed work area Light in working area Machine operates/operated with emulsion Coolant unit with paperband filter ACCESSORIES 1 set Grinding wheel flange GENERAL TECHNICAL DATA Total power requirement 15 kVA Machine dimensions (LxWxH) approx. 3800x2200x1800 mm Machine weight approx. 6000 kg REMARKS We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: new, Year of construction: 2025, Universal belt grinding machine with rich standard equipment and the ability to work vertically and horizontally. Machine description easy and quick change of grinding tools easy and quick setting of the grinding angle easy and quick change of grinding belt Delikovu Ukzoyllecg quick change head position in the vertical-horizontal range Technical parameters Belt speed 14,5 / 29 m/s Belt dimensions 75 x 2000 mm Voltage 400 V Motor power 1.5 kW / 2.2 kW Weight 110 kg Maximum tube diameter 60.3 Equipment rubberized wheel Ø200 mm tool with sliding support and rollers 120 x 90 mm pipe grinding vice with adjustable angle 0-30° rollers set: 20; 21,3; 26,9; 33,7; 42,4; 48,3; 60,3 mm grinding belt 75x2000 mm

Condition: good (used), . Manufacturer : HOFMANN Type: NG-1 max. disk diameter 320 mm max. support weight 20 kg - without balancing mandrel - . Dceliswcdwfjkylleg .....

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Dcolowgkgzeikyllog Weight: approx 3 T

Condition: new, Year of construction: 2025, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device Dslikyljcnz Aysljcg The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: excellent (used), Year of construction: 2014, Vibratory finishing machine manufacturer Kromas Type VRM 225, container volume 225, year of construction 2014. With separating flap and separating section. With dosing pump for the compound. and Vibration dryer, manufacturer Erba Type ETK 200, year of construction 2012 Container volume 200 litres With heater inside With material for drying the components. Both machines are in very good condition, the rubber coating is in very good condition. Dcoliswb R Uhekylleg

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, CNC surface grinding machine and profile grinding machine Elb Grinding length 600 mm Grinding width 400 mm Grinding height 475 mm Table load 650 kg Table clamping area 960x 400 mm Longitudinal table stroke up to 700 mm Vertical feed max. 1200 mm / min. Dcelikysvt Rbaolljg Resolution 0.001 mm Cross travel max. 370 mm Cross feed max. 1500 mm/min. Incremental position measuring system, glass scale Resolution 0.001 mm CNC CONTROL UNIcon "U" Further technical data on request

Condition: good (used), Year of construction: 2001, grinding length 400 mm Dcslikylswb Hymelsg grinding width 200 mm table load 150 kg weight of the machine ca. 1200 kg Surface grinding machine Manufacturer: Geibel + Hotz Type: FS-40 AC Year of construction: 2001 max. sanding area: 400 x 200 mm table to spindle centre: 415 mm max. longitudinal table movement: 500 mm max. table load: 150 kg Drm.: sanding discs: 225 mm Max. Lateral movement: 200 mm

Condition: ready for operation (used), Year of construction: 1982, grinding length: 900 mm, grinding width: 600 mm, magnetic platter 700X450MM strokes 900X600MM motor 3KW max. grinding wheel diameter 250MM Delotui R Ijikylljcg weight 1900KGS

Year of construction: 1971, Condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Dcolikovc Apbsylleg Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Dcelikehk Df Deylleg Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: used, Functionality: fully functional, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Max. grinding diameter without steady rests: 100 mm Max. diameter: 240 mm Workpiece Swivel: 90° Grinding spindle slide Min./max. swivel: 30° Min./max. transverse movement including 300 mm quick adjustment: 100 mm Wheel diameter after rotation 1st degree: 320 - 400 mm 2nd degree: 260 - 320 mm Max. workpiece weight between centers: 60 kg Max. workpiece weight in chuck: 20 kg Max. workpiece weight in faceplate: 20 kg Dolikylswhp D Uolscg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. Tilt: 12° Min./max. longitudinal travel: 2 - 500 mm Infinitely variable table travel: 0.5 - 5 m/min Handwheel adjustment: 2 and 20/rev

Condition: as good as new (ex-display), Carbide tool grinding machine Exhibition machine Dcolikjiwi Thoylljg With new diamond wheels 175 mm For tool holders up to 20 mm

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, spindle speed (max.): 90,000 rpm, spindle speed (min.): 1,000 rpm, feed length X-axis: 360 mm, feed length Y-axis: 200 mm, feed length Z-axis: 360 mm, type of input current: AC, overall weight: 2,500 kg, power: 5 kW (6.80 HP), Equipment: rotational speed infinitely variable, Fully functional 5-axis Strausak Fleximat including NSW regrinding software and Numroto software (both work in parallel) The machine is currently still in operation and can be tested on site. VAT can be declared Complete documentation available The machine was bought new and regularly serviced, so it is from a single source and fully operational For further information, please call 2 machines available Djlikovmxxyoyllscg

Condition: like new (used), operating hours: 10 h, Functionality: fully functional, Universal Grinding Machine EWAG WS11 SP Serial no. 1851684 /101 W25 headstock This machine was completely overhauled and rebuilt by Scemama in Switzerland in 2017. It has had only a few hours use since then so is effectively ‘as new’. The machine can be seen running under power in the UK or I can supply a video. Please note – this is a private sale so no VAT is payable if bought within the UK Machine specification: - Infeed operation 4C Dcjlikeu A Trweylljg - Fine cross feed 4FQ-M - Grinding stroke by lever and / or hand wheel 3H. - Spiral grinding head W25 - Dust extraction unit - LED 3W lamp with flexible mount. - Heidenhain ND 280 digital display on Z axis. 4DZ-MZ. - Foot switch 9M* - Digital measuring table MT-MZ DIG. - Holder for measuring table. Technical Data Spindle speeds (both directions) 2500/3500/4800/6800 RPM Grinding motor 0,3 kW Vertical grinding stroke, straight 100 mm Fine setting range of micrometer stops 25 mm Micrometer stops graduated to 0,01 mm WORKHEAD Spindle speeds, stepless in both directions 100-1300 RPM Workhead motor 0,25 kW Number of teeth in index plate 120 Indexing with fixed pawl every 3° Indexing with angular micrometer every 2' Collets W-25 Cross feed stroke, horizontal 100 mm Rapid feed, per turn of handwheel 2 mm Fine feed, per turn of handwheel 0,1 mm Fine feed, graduated to 0,001 mm Swivelling range of workhead a) in main plane 165° indexing with fixed pawl every 3° indexing with angular micrometer every 2' b) in grinding plane about 15° indexing at 0° and 10° Transverse movement 80 mm Fine setting range of micrometer stop 25 mm Micrometer graduations 0,01 mm Dust extractor motor 0,18 kW

Year of construction: 1971, Condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,9 x 2,5 m dimensions electric cabinet LxWxH: Nr. 1: 1,95 x 0,4 x 1,95 m dimensions electric cabinet LxWxH: Nr. 2: 0,8 x 0,23 x 1,95 m dimensions:: Abluftanlage: 1,4 x 0,7 x 0,55 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 69x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. Djlikjvc An Doylljcg *

Condition: excellent (used), Rema double grinding head / school machine wheel mass (in mm) 300/40/76 power (in KW): 1,8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Shields Location: Ex stock 54634 Bitburg - immediately available - Djlikehaf Ndeyllecg

Condition: used, Functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Deliowhp Dnskylljcg Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg

Condition: used, Year of construction: 1995, Order No. 23066 Technical Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface sanding aperture approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact disc W 150 / D 200 mm - Drive disc W 150 / D 200 mm - Drive 400 V / 3 kW - Adjustable working height - Motorized dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg Dcjlowf Hppjikylljg

Condition: good (used), Year of construction: 1999, Functionality: fully functional, spindle speed (max.): 9,000 rpm, spindle speed (min.): 1,000 rpm, feed length X-axis: 360 mm, feed length Y-axis: 200 mm, feed length Z-axis: 360 mm, type of input current: AC, overall weight: 2,500 kg, power: 5 kW (6.80 HP), motor speed: 9,000 rpm, Equipment: rotational speed infinitely variable, Fully functional 5-axis Strausak Fleximat including NSW regrinding software and Numroto software. The machine is currently still in operation and can be tested on site. Dcslikylevmmvmslsg VAT can be declared. Complete documentation available The machine was bought new and regularly serviced, so it is from a single source and fully operational Further information is available on the phone

Condition: ready for operation (used), Knife sharpening machine Dceliouip Tzjkyllsg Reform AR 21 Type 51 Grinding length 2100mm Magnetic beam swivels

Condition: good (used), grinding length: 500 mm, grinding width: 200 mm, grinding wheel diameter: 225 mm, distance table to spindle center: 350 mm, type of input current: three-phase, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 1,800 kg, power: 4.7 kW (6.39 HP), space requirement length: 2,570 mm, Equipment: documentation/manual, rotational speed infinitely variable, Vial grinding machine Dolerblx Reikyllocg JUNG infinitely variable cutting speed up to 35m/min. with suction, and with coolant device

Condition: not inspected (used), Jung JHW 5 VA surface grinding machine Dslikyswbqtkolljcg