Condition: good (used), Year of construction: 2017, In good technical condition and fully functional. Year of construction 2017. Manufacturer: NS MAQUINAS Dslrasvcm D Aov Abekl Grinding machine for grinding stainless steel pipes. It is intended for the preparation of pipes for polishing and chrome plating. There is a complete manual for the grinder.

Condition: used, TECHNICAL DETAILS - max. grinding length: 500 [mm] - max. grinding diameter: 3000 [mm] EQUIPMENT - 1 grinding spindle 12000 [t/mm] Dkjlreu Hac Rsav Abel - retractable wheel dressing device - coolant tank with pump and paper filtration

Condition: used, Year of construction: 1994, grinding wheel diameter 500 mm max. width of grinding wheel 220 mm Control Siemens Sinumerik total power requirement 35 kW In our opinion, the machine is in good used condition and can be viewed under power by appointment. Dkolravsv Ehgks Abjl Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: reconditioned (used), Steel grinding machine Make REMA Model DS 07/ST Dksljhvu Tmerav Abel version with pole-changing motor 0,22/0,37 kW 1450/2900 rpm year of manufacture unknown Ma.-No. 022857 Equipment: - Reversing switch right/left rotation - column design with chip tray - Wet grinding device - 2 pcs. support table ATS (left) inclinable from -5° to +15 and with spring rockers - 2 pcs. angular stops - adjustable support table ATK (right) for grinding chip grooves - steel holder for support table ATK 360° rotatable, swiveling, with height adjustment and knurled screw for adjustment of chip depth - enlarged protective hood (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - protective hood (right) for grinding wheels Ø 125 mm with mounting flange - Operating instructions used as seen, without warranty

Condition: excellent (used), A very well-maintained surface grinder, manufactured by G+H, type: FS 40 Primus SA, machine number: 20701189 Magnetic table: 400x200 Dkslravjwc Skms Absl Magnetic separator and pump for cooling

Condition: not inspected (used), For sale is an Okamoto surface grinder type ACC-12.24DX The machine can not be tested by us, because it requires a 60 Hz connection. Visually the machine is in good condition Dkslrasnzhwwjv Absl new grinding wheel included in the offer. Technical data: Volt: 230/460 Freq.: 60 Hz phase: 3 Power: 7.5 KvA Control voltage AC: 100 V Control voltage DC: 12-24 V Clamping surface: 30*67 cm grinding wheel diameter: 30 cm Pitch circle diameter: 7.5 cm On request, for an additional charge, the machine can be loaded on truck and the transport can be organized Europe-wide. Prices plus value added tax Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Year of construction: 1998, grinding length 2000 mm Djlrjv S Ip Esav Abekl grinding width 600 mm total power requirement 17 kW weight of the machine ca. 10 t

Condition: not inspected (used), Year of construction: 1988, KELLENBERGER CNC Universal Grinding Machine Delrav Ajwb Aztebskl Type:UR175x1000CNC Year:1988 Control:KELCO 70 Distance between centres:1000mm Max. grinding height:175mm Max. workpiece diameter:349mm Grinding wheel size:400x63x127mm Grinding spindle speed:2040rpm Table travel:1100mm Cross slide travel:270+100mm Workhead swivel:360° Machine weight:3900kg Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Dkslrjv N Ra Ueav Abjl subject to prior sale!

Condition: new, Steel grinding machine Make: REMA Model: ST 1/125 Condition: New machine 0,37 kW 2900 rpm 400 V/50 Hz Dkolrav Asr Dui Uobjl equipped as standard with - ATS support table

Condition: used, crankshaft length 1200 mm Crankshaft diameter 380 mm grinding wheel diameter 450 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery Dkelrev N Rbleav Abol if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, Control Fanuc weight of the machine ca. t In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Delravjvdt Iwe Abjkl Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2004, grinding wheel diameter 660 mm Dkslravovdt I Ds Abel Control Siemens 840D work piece width min. 5 / max. 180 mm max. workpiece diameter 200 mm weight of the machine ca. 15,0 t dimensions of the machine ca. L 3,1 x B 4,0 x 2,7 m

Condition: used, Year of construction: 1998, Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery Dkjlrovdt Rroav Abel if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg Dkjlrav Ajvy In Debsl weight of the machine ca. 3,8 t

Condition: used, Year of construction: 2012, workpiece . Dslravevdt Nuo Abekl workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm Workpiece spindle: dimension 150 x 300 mm max. turning speeds 250 min/-1 tail stock: longitudinal adjustment manuell über Kettenrad tailstock quill: Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar grinding table: travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) Grinding spindle I: dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 Grinding wheel I: type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec bezel: type GR-3520-NR mm diameter range D 20 - D 35 mm dressing spindle: dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, crankshaft length 680 mm Crankshaft diameter 180 mm Grinding wheel diameter spindle 1 400 mm Grinding wheel diameter spindle 2 100 mm Dkjlravov N N U Ds Abel In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 7 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2000, centre distance 1000 mm grinding length 1000 mm centre height 300 mm Control Siemens 840 800 kg weight of the machine ca. 6,7 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Dolrajvy Im Hov Abjkl Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 1989, grinding diameter 100 mm Dkslrajvy Ipbev Abel grinding length 300 mm centre height 100 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5x1,7 m

Condition: used, Year of construction: 2007, grinding range 600 x 450 mm magnetic plate size 600 x 400 mm grinding wheel size 300 x 50 x 76,2 mm total power requirement 11 kW weight of the machine ca. 2,1 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Dkjlrajvy Ip Ijv Absl Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: used, Year of construction: 1994, grinding wheel diameter 500 mm max. width of grinding wheel 230 mm Control Siemens total power requirement 35 kW Dkslrav Asv Ehgqjbjl In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2000, swing diameter 500 mm centre distance 2.000 mm grinding head swivelling 90 ° front end of the spindle A 2-5 ISO 702/1-1975 grinding spindle head - swivable +45 / -15 ° grinding wheel size 500 x 80 x 203 mm Dslrsvy Inkoav Abskl table feed 2.200 mm feed speeds 0,01 - 4.000 mm/min rapid speed 9.000 mm/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, crankshaft length 635 mm Crankshaft diameter 400 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Dkelrasv N Rbrov Absl Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1981, grinding diameter max. 100 mm grinding length 180 mm grinding wheel diameter 400 mm grinding wheel width 180 mm In our opinion, the machine is in good used condition and can be viewed under power by appointment. There are 4 identical machines available. Dolravovdt S Ns Abekl Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Year of construction: 2007, Condition: used, control Siemens 840D Dslrsvdt Hasav Abjkl grinding wheel diameter 900 mm Workpiece - grinding width 144 - 152 mm Workpiece - grinding dimension 22 - 25 mm turning speeds 24 m/s: 1.425 U/min peripheral speed max. 25 m/sec capacity 37 kW total power requirement 75 kW weight ca. 18,0 t dimensions of the machine ca. L 4,9 x B 4,9 x H 2,6 m In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!