Condition: new, Year of construction: 2024, Motor: 4 kW Debjwa Sq Io E Nw A Ejkl Voltage: 230V 3F, 400V 3F or 460V 3F Belt speed: 45 m/s, 4300 r/p Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation 2-in-1 pipe grinder The new AL150HS has a belt speed of 45 m/s thanks to its unique gearbox. If you open the tailgate, the pipe grinder can also be used as a belt grinder, ideal for deburring polished profiles. The AL150HS can be operated with two handwheels or with a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150HS from ALMI can be used to process square, rectangular and round pipes with different wall thicknesses and in all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. Sanding at high speed Thanks to new developments, ALMI has been able to achieve a sanding speed of 45 m/s with the renewed AL150HS. This gives the sanding belt a longer service life, as the faster sanding means there is less heat in the material, resulting in less discoloration and fine dust.

Condition: good (used), Year of construction: 1972, working condition Djb E Nw Aewb Ah Ts Eekl

Condition: excellent (used), Permanent magnetic chuck 300 x 150 mm Table clamping area: 400 x 150 mm Maximum grinding length: 300 mm Maximum grinding width: 150 mm Maximum distance from table to spindle center: 450 mm Longitudinal table speed: 7.5 / 15 m / min. Automatic cross feed with continuous rapid traverse: 150 mm Automatic Continuously adjustable cross feed: 0.1 – 150 mm / stroke Vertical feed by hand Grinding spindle – speed: 2,800 rpm Large grinding wheel – diameter: 200 mm Large grinding wheel width: 30 mm Dkeb E Nowarc Rsw A Esl Rapid traverse in cross feed Hand-operated cross feed – fine feed = 0.005 mm Hand-operated vertical feed – fine feed = 0.005 mm Grinding wheel – dressing device with diamond dressing Drive power: 2.5 kW Coolant system Machine lamp Weight: approx. 1,000 kg Footprint: W 1.10 x D 1.10 x H 2.00 m The machine is in excellent condition and has been rarely used. Forklift available, truck loaded free Cheap shipping available Location of the machine: 48324 Sendenhorst

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm surface grinding table: 460 x 75 mm suction connection: 100 mm Deb E Nsfnr Aiow A Eekl motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Weight approx.: 66 kg Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: good (used), internal grinding machine for pots / holloware up to Ø 400 x 600 mm hydraulic movement of grinding heads complete with vacuum pump and basic vacuum fixture incl. hydraulic unit and control cabinet Djb Eebdfr Tj Nw A Eekl

Condition: ready for operation (used), A SIELEMANN rotary table, surface, internal, and external cylindrical grinding machine, TYPE R100 RETROFIT 2002, in good condition. The machine is very precise and extremely stable. Largest workpiece diameter: 1000 mm Largest workpiece height (without clamping device): 350 mm Surface grinding: Largest grinding width of a circular surface: 375 mm with a minimum bore diameter of 50 mm Internal cylindrical grinding: Largest bore diameter: 700 mm Deb E Njv Nakvow A Eokl Smallest bore diameter: 70 mm Largest bore length: 300 mm External cylindrical grinding: Largest outer diameter to be ground: 800 mm Smallest outer diameter to be ground: 70 mm

Condition: new, Year of construction: 2024, Motor: 4 kW Belt speed: 30 m/s, 2800 rpm Belt dimensions: 100×2000 mm / 150×2000 mm Sanding diameter: Ø20-Ø114.3 Sanding angle: 20 - 90º Operation: Lever and manual wheel operation Weight: 260 kg Easy to operate The AL150 can be operated with two hand wheels or with a lever. Both options are available on the machine. With the AL150 you can grind material from Ø20 to Ø114.3. The cross support and the carriage with rotating clamp are infinitely adjustable. This means that all pipe profiles can be ground at any desired angle from 20° to 90°. The AL150 from ALMI grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common materials. The ALMI belt adjustment system now makes it even easier to adjust the sanding belt using the hexagon key supplied. The sanding belt can be tensioned quickly and the sanding rollers can be changed in just a few seconds. 2-in-1 pipe grinder The AL150 is equipped with a deburring table with which the pipes can be easily deburred, making the pipe grinder multifunctional. Dob Eswa Squs Nw A Eskl

Condition: used, Year of construction: 1964, Functionality: fully functional, grinding length: 750 mm, grinding wheel diameter: 350 mm, total width: 1,420 mm, total length: 2,400 mm, total height: 1,500 mm, grinding diameter: 250 mm, overall weight: 2,500 kg, space requirement height: 1,500 mm, Grinding diameter max. 250 mm Center distance 750 mm Djb E Nwjwbfk Dj A Eokl Bore diameter min. 15 mm Bore diameter max. 220 mm Grinding wheel (diameter x width x bore) 350 x 63 x 127 mm Internal spindle diameter 70 mm Table tilt 5° Grinding spindle head rotation 30° Workpiece spindle rotation 90° Power consumption 6 kW Space requirement 2.4 x 1.45 x 1.5 m Weight 2.5 t Accessories: various flanges; internal grinding attachment; operating instructions

Year of construction: 2017, operating hours: 17,500 h, Condition: good (used), - cylindrical grinder -second hand- - KPS-A-1000 retrofitted KARSTENS K-11 basis - retrofitted 2017 / priginal yom 1968 - distance between centers: 1000mm - center hight: 150mm Dksbsi Dffzo E Nw A Eel - grindign wheel dimensions: 400 x 80 x 127mm - control: SIEMENS S7 - 1200 (SPS) - 2 automatic modi for face grindung, JOG and setup-Mode possible - dresser rotating Dr. KAISER - CONTACT SCOPE - CBN wheels - 3nine suction "LINA" - SEITZ belt filter PFA 600

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Studer S32 with Siemens 840 powerline control and Felsomat handling. 30-degree angled cut. Top condition. Machine can be inspected under power. Dkjb E Nowa Im Eew A Eol

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW - speed 1420 U/min - working hight is 600 mm Deb Ejdz Uzbe Nw A Eekl - conical shaft

Condition: good (used), techn. data: Disc size: D:150 x 20 x D:32 mm Debsix I Sgo E Nw A Eokl connection: 380 V Speed: 3000 rpm. Equipment: - Stand design - eye protection shields - retrofit EMERGENCY STOP - 2 new grinding wheels D:150 mm

Condition: new, Year of construction: 2025, New cylindrical grinding machine – or save around 70% with FlexiGrind? Simple control replacement on your old CNC cylindrical grinding machine with FlexiGrind! Modernizing existing cylindrical grinding machines has never been easier. FlexiGrind offers a cost-effective and efficient solution: Instead of a complete overhaul of the old machine, the FlexiGrind control kit replaces only the outdated electronic and electrical components. This is done directly on-site, minimizing downtime and avoiding the high costs of a complete new machine investment. Thanks to easy-to-understand installation instructions, the replacement can be performed either by your own maintenance team or our installation team. The FlexiGrind kit replaces all outdated, critical components of your cylindrical grinding machine, such as the control system, control cabinet, motors, linear encoders, and cables – in a single step. It includes the following hardware components: • Modern control system for precise grinding and easier operation from FANUC and SIEMENS • New control cabinet with a clear layout • Three new servo motors for the indexable insert, X, and Z axes • Adapters for the new servo motors • New grinding spindle motor for precise spindle speeds • New absolute length measuring systems for maximum precision • New Euchner safety switches for maximum safety • Completely new cabling for reliable operation The kit also includes user-friendly software that enables simple operation and a quick return to operation. All necessary documentation for installation and programming is included. The FlexiGrind kit complies with the latest safety standards and is CE-certified. Dkob E Nwsvfp Uvo A Ejl Simply replace your old control system and defective components with our new FlexiGrind control system kit. Control system conversion made easy - feasible for any maintenance thanks to the clear assembly instructions! Versatility and Compatibility The FlexiGrind kit is specifically designed for Karstens and Bahmüller CNC cylindrical grinding machines. However, it is also available for machines from other manufacturers such as Studer, Tacchella, Kellenberger, Junker, and EMAG upon request. Request a control system replacement today to get your defective or outdated cylindrical grinding machine running smoothly again!

Condition: like new (used), Year of construction: 2023, operating hours: 775 h, Functionality: fully functional, grinding length: 2,000 mm, grinding width: 1,200 mm, total height: 720 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 1,100 mm, workpiece weight (max.): 3,500 kg, grinding height: 720 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 5 m/min, grinding wheel diameter: 600 mm, distance table to spindle center: 1,050 mm, table length: 2,000 mm, table load: 4,000 kg, type of input current: three-phase, table width: 1,000 mm, grinding wheel width: 150 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, overall weight: 36,000 kg, grinding spindle motor power: 22 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,100 mm, warranty duration: 12 months, space requirement height: 4,550 mm, space requirement length: 7,850 mm, space requirement width: 4,840 mm, Equipment: documentation/manual, rotational speed infinitely variable,  Easy-to-use Z-Control control system with high levels of comfort  Automatic vertical infeed with dressing amount compensation Deb E Nwjwax U Te A Ejkl  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Surface grinding • Plunge grinding • Roughing / finishing / sparking  Extremely simple operation via touchscreen  Large, clearly arranged 10.4" color screen  Electronic handwheel, effective on the vertical and transverse axes, switchable in two steps to 0.001 and 0.01 mm  Gantry-style machine design for maximum accuracy  Sturdy cast iron construction of all machine components  Heavy machine weight for maximum rigidity  Preloaded linear guide system in the vertical and transverse axes (Bosch Rexroth) for outstanding precision  Scraped double-V sliding guides in the X-axis ensures excellent damping properties and high-quality grinding results.  Hydraulic table drive with separate cooling unit to achieve good surface finishes.  Electromechanical transverse and vertical movement.  Direct measuring system in the vertical axis (Heidenhain) for precise positioning.  Rotary pulse generator in the transverse axis.  Maintenance-free belt filter system with a 2000-liter tank capacity and a 10-bar pressure pump for effective cooling and rinsing.  Integrated channel rinsing.  Upstream magnetic separator for pre-filtration.  Power supply: 400 volts, 3 phases, 50 Hz.  Continuously variable grinding spindle motor with constant cutting speed across the entire working range of the grinding wheel (vconstant).  Roller-bearing grinding spindle guarantees a long service life.  Belt-driven grinding spindle.  2 machine lights in the work area. (LED)  Table-mounted dressing device for high accuracy and surface quality with the option of mounting three diamond dressing tools  Electro-permanent magnetic chuck with integrated polarity reversal device and holding force adjustment, pole pitch p = 25 mm  Holding force adjustment in 16 steps  No heating of the magnetic chuck, therefore highly precise  Automatic central lubrication in the x-axis (slideway oil)  Automatic central lubrication in the y + z axes (grease)  Partially enclosed machine with sliding door and front-mounted service door; Open on the top left, closed on the top right with a 300 mm nozzle for extraction  Effective splash protection with good accessibility  Additional service door on the rear of the machine, including a second electronic handheld unit  Machine prepared for connection to an emulsion mist extraction system; Connection nozzle Ø = 300 mm Standard accessories Consisting of:  Grinding wheel holder  Grinding wheel 500 x 100 x 203.20 mm  Complete documentation  CE declaration of conformity  Acceptance report according to DIN 8632  Leveling elements  Balancing mandrel  Rolling stand Special accessories:  Semi-automatic grinding wheel balancing system with GAP

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, grinding length: 400 mm, total height: 525 mm, feed length X-axis: 400 mm, feed length Y-axis: 525 mm, rotational speed (max.): 1,400 rpm, We offer for sale a precision surface grinder from the renowned GEIBEL & HOTZ brand, model FS 640 SD. Technical parameters: • Table working surface: 600 x 400 mm • Maximum table load: 600 kg • Year of manufacture 2015 • Grinding wheel: Ø 300 mm x 50 mm, bore 76.2 mm • Spindle speed: up to 1400 rpm • Feed speed in the X axis: 5 – 35,000 mm/min • Feed ranges: o Z axis (transverse): up to 400 mm Dsb Ejwbixxj Nw A Eskl o Y axis (vertical): 140 – 525 mm Equipment and additional features: • Electromechanical table drive • Comfort Control Panel SD control panel • Automatic lubrication system • Stable and low-vibration cast construction

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Studer S20 in very good condition with accessories and documentation Dob E Nowa Iimsw A Eskl

Year of construction: 1973, Condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 Dob Ejn Atcho Nw A Eekl year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: not inspected (used), Year of construction: 1971, Equipment: - TROWAL vibratory finishing vibrator Dksb Eoudlmyj Nw A Eol - Documentation

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, (Delivery time: immediately in stock) The K11 was completely repaired and checked by us. Painting work was carried out. Of course, we are available to answer any questions you may have. You can also purchase spare parts from us at any time. Dkebjvz Aq Ns E Nw A Ejl Technical data / equipment: External grinding, internal grinding Center distance: 650 mm Center height: 180 mm Workpiece weight: 70 kg flying, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N Table inclination: 10 degrees Adjustment path of feed spindle: 80 mm Rapid traverse path: 50 mm Coarse adjustment of air cushion: 280 mm Grinding spindle motor outside: 4 KW Grinding spindle motor inside: 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: net 3600 Kg Feed drive via DC motor Air cushion-assisted quick adjustment of the grinding headstock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic work process, feed movement via compass rose switch: Rapid forward, rapid reverse, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece headstock with continuously adjustable drive with rotating and lockable spindle. Feed control for longitudinal grinding and plunge grinding, input for retrieval, feed amounts, feeds, spark-out times, idle strokes New digital display for axes can be retrofitted (option) comparable to Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat

Condition: new, Year of construction: 2025, Functionality: fully functional, center height: 155 mm, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, center width: 1,000 mm, grinding wheel diameter: 400 mm, total length: 1,000 mm, grinding diameter: 300 mm, quill stroke: 25 mm, workpiece weight between centers: 150 g, type of input current: three-phase, workpiece diameter between centers: 300 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, feed rate X-axis: 4,000 m/min, feed rate Z-axis: 6,000 m/min, grinding spindle motor power: 5,700 W, warranty duration: 12 months, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 6 m/min, workpiece spindle speed (max.): 600 rpm, space requirement height: 2,290 mm, Equipment: rotational speed infinitely variable,  Easy-to-use Z-Control system with high levels of comfort  Automatic infeed with dressing amount compensation  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Cylindrical grinding Dkobjwax Rbj E Nw A Eel • Roughing / finishing / sparking  Simple operation via touchscreen  Large, clearly arranged 12.4" color screen  Electronic handwheel, effective on the X and Z axes, switchable in four steps to 0.0002; 0.001; 0.01; and 0.1 mm  Robust cast construction of all machine components  High machine weight for maximum rigidity  Preloaded linear guide system in the X-axis (Bosch Rexroth) for outstanding precision  Ground sliding guides in the Z-axis as V-shaped flat guides ensure excellent damping properties and high-quality grinding pattern  Electromechanical longitudinal and transverse movement  Direct measuring system on the X-axis (Heidenhain) for precise positioning  Rotary encoder on the Z-axis  Maintenance-free belt filter system with a 270-liter tank capacity and a 3.5-bar pressure pump for effective cooling and rinsing  Upstream magnetic separator for pre-filtration  Power supply: 400 volts, 3-phase, 50 Hz  Continuously variable grinding spindle motor  Grinding spindle motor with constant cutting speed across the entire working range of the grinding wheel (vconstant)  Roller-bearing mounted grinding spindle guarantees a long service life  2 machine lights (LED)  Holder for dresser on the machine table for high accuracy and a permanently mounted dresser with the option of holding 3 dressing diamonds  Automatic Central lubrication in the Z-axis (slideway oil) and the X-axis (grease)  Fully enclosed machine with service and maintenance doors  Effective splash protection with easy accessibility  Pneumatically controlled tailstock Standard accessories consisting of:  Grinding wheel holder  Grinding wheel 400 x 50 x 127 mm  Complete documentation  CE declaration of conformity  Acceptance report according to DIN 8630  Leveling elements  Balancing mandrel  Roller support  Adapter flange for workhead  MT 4 center (tailstock)  MT 5 center (workhead)  1 set of turning centers

Condition: repair required (used), Functionality: not functional, workpiece weight (max.): 300 kg, grinding length: 2,000 mm, Used Cylindrical grinding machine TOS BHU 32A/2000 grinding diameter 320 mm, grinding length 2,000 mm, without electrics, in need of repair, ideal for companies specializing in general overhauls. Deb E Nwewbiw Is A Eekl

Condition: used, Year of construction: 1983, grinding diameter 250 mm Dkob E Nev Irmgsw A Esl grinding length 600 mm centre height 125 mm total power requirement 5,5 - 7,5 kW weight of the machine ca. 2,7 t

Condition: as good as new (ex-display), Functionality: fully functional, rotational speed (max.): 180 rpm, filling weight (max.): 75,000 g, grinding spindle motor power: 4,000 W, TECHNICAL DETAILS Motor power: 4 kW Machine capacity: 120 l Load: max. 75 kg per load Speed range: 50 to 180 rpm Recommended setting: 115 to 135 rpm Dkebewa Ul Us E Nw A Ejl Container details Working bowl diameter: 640 mm Working bowl lining: PU, 26 mm, yellow Workpiece capacity per load: 55 l MACHINE DETAILS Dimensions (L × W × H): 1,700 × 1,300 × 2,200 mm Weight: 700 kg Electrical and water connections Power connection: 3 × 400 V Fuse protection: 16 A CEE Water connection: G ¾ ISO 228-1 EQUIPMENT - Touchscreen with manual operation - Continuous speed adjustment via frequency converter - Stainless steel discharge box - Manually adjustable ball valve for compound addition - Color finish in RAL 7015/7035

Condition: repair required (used), Year of construction: 1986, Functionality: not functional, machine/vehicle number: 66.190.1, - CNC control SINUMERIK 840 D - EU Declaration of Conformity Attention: The machine is unrepaired and in need of overhaul. Dksb E Nsn I R Exjw A Esl Possibly suitable for spare parts

Condition: new, Year of construction: 2025, Functionality: fully functional, grinding length: 1,000 mm, grinding width: 600 mm, total height: 420 mm, total length: 1,000 mm, total width: 500 mm, feed length X-axis: 1,400 mm, feed length Y-axis: 600 mm, feed length Z-axis: 550 mm, workpiece weight (max.): 880 kg, grinding height: 420 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, grinding wheel diameter: 400 mm, distance table to spindle center: 600 mm, table speed: 30,000 mm/min, table length: 1,000 mm, table load: 1,000 kg, type of input current: three-phase, table width: 500 mm, grinding wheel width: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 5 rpm, overall weight: 7,280 kg, grinding spindle motor power: 11,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 2 m/min, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5 rpm, warranty duration: 12 months, space requirement height: 2,740 mm, space requirement length: 4,730 mm, space requirement width: 3,020 mm, Equipment: documentation/manual, rotational speed infinitely variable,  Easy-to-use Z-Control control system with high levels of comfort  Automatic vertical infeed with dressing amount compensation  Fully automatic grinding cycle with dressing cycles  Grinding cycles: • Surface grinding • Plunge grinding • Roughing / finishing / sparking  Extremely simple operation via touchscreen  Large, clearly arranged 10.4" color screen  Electronic handwheel, effective on the vertical and transverse axes, switchable in two steps to 0.001 and 0.01 mm  Sturdy cast construction of all machine components  High machine weight for maximum rigidity  Preloaded linear guide system in the vertical and transverse axes (Bosch Rexroth) for outstanding precision  Scraped double-V sliding guides in the X-axis ensure excellent damping properties and high Micrograph Quality  Hydraulic table drive with separate cooling unit to achieve good surface finishes  Electromechanical transverse and vertical movement  Direct measuring system in the vertical axis (Heidenhain) for precise positioning  Rotary pulse generator in the transverse axis  Maintenance-free belt filter system with 500-liter tank capacity and 3.5 bar pressure pump for effective cooling and rinsing  Integrated channel rinsing  Upstream magnetic separator for pre-filtration  Power supply: 400 volts, 3 phases, 50 Hz  Grinding spindle separated from the motor by a coupling, thus no heat buildup  Continuously adjustable grinding spindle motor with constant cutting speed across the entire operating range of the grinding wheel (vconstant)  Roller-bearing mounted grinding spindle guarantees a long service life  2 machine lights in the work area (LED) Dkeb E Nw Ajwax I Hs Eel  Table-mounted dressing device for high accuracy and surface quality with the option of accommodating three diamond dressing tools.  Electro-permanent magnetic chuck with integrated polarity reversal device and holding force adjustment, pole pitch p = 25 mm  Holding force adjustment in 16 steps  Magnetic chuck does not heat up, therefore highly precise  Automatic central lubrication in the x-axis (slideway oil)  Automatic central lubrication in the y + z-axes (grease)  Partially encapsulated machine with sliding door and front-mounted service door;  Effective splash protection with good accessibility  Machine prepared for connection to an emulsion mist extraction system; Connection nozzle  = 200 mm