Condition: new, Grinding of drills with a diameter of 2 mm to 13 mm Adjustable angle ----- 90 and 135 Dcobjga T D Tevn Tbkjg Grinding speed ----- 5300 o/min Grinding stone ----- CBN 200 Motor ----- 230V/1F/180W Weight ----- 10 kg

Condition: new, Machine type: Trough vibrator TV73 Shown: TV73 incl. soundproofing Manufacturer: Eurotec Innovation GmbH Rated speed: 1500 rpm Gross volume: 470 liters Internal length of container: 1100 mm Internal width of container: 680 mm Interior height of container: 700 mm Supply line: 400V - 16A - 50Hz AREAS OF APPLICATION: - Deburring, smoothing and polishing - Descaling, derusting and cleaning - Fillet edges - Finishing of surfaces ADVANTAGES: - Wiper edge to reduce component adhesions on the inner wall of the container - Particularly economical even if used only occasionally - Optionally available as a version for pressure deburring and for ball polishing - Robust construction with a low-maintenance vibration motor - Integrated mount for lifting and moving the system using a lift truck or forklift - Fast container emptying and abrasive change through a generous drain opening for abrasives - Quick-change drain sieve made of polyurethane - Rubber-damped feet to reduce vibration transmission The stated price is net plus 19% sales tax and plus freight. A suitable switchgear is required to operate the system. In the pictures, the system including accessories is shown, which is optionally available. The price refers to the basic machine (TV45) ----- Dcsbvn Tbeh Ukxlskeg Please contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation takes place by means of telecommunication (email, fax, telephone, message portal), where we first make you a non-binding offer, in which we also inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase/conclusion of contract takes place.

Condition: used, Functionality: fully functional, grinding length: 1,000 mm, grinding width: 400 mm, Technical specifications of the JOTES SPD 40 magnetic grinding machine Worktable dimensions (L x W): 1000 x 400 mm Grinding wheel dimensions (diameter x width x bore): 350 x 63 x 127 mm Grinding wheel speed: 26 m/s Grinding wheel support plate diameter: 197 mm Largest horizontal grinding wheel travel: 470 mm Adjustable continuous grinding wheel feed: 0.5-4.5 m/min Adjustable stepped grinding wheel feed: 3-30 mm Manual grinding wheel travel (per wheel revolution): 8 mm Maximum vertical grinding wheel travel: 450 mm Minimum worktable travel: 200 mm Worktable speed range: 2-30 m/min Maximum spindle axis elevation above the worktable: 575 mm Minimum spindle axis elevation above the worktable: 125 mm Dcjbvn Tbsv Iy Dmsksg Vertical Travel accuracy: 0.002 mm Grinding depth (automatic infeed): 0.02 mm Grinding allowance (automatic infeed): 0.36 mm Oil tank capacity: 300 l Power: 10 kVA Dimensions (L x W x H): 3740 x 2080 x 2260 mm Machine weight: 4800 kg

Condition: good (used), Year of construction: 2005, Rollomatic NP4 CNC cylindrical grinding machine TECHNICAL DATA Gripper: 300 mm Total length: 30-300 mm Grinding range: 0.025 - 16 mm Grinding length: Max. 330 mm Blank: 0 - 20 mm Number of axes: 4 + 3 SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic NP4 CNC cylindrical grinding machine Fire extinguishing system Dcebvnevv Nnwo Tbksg Exact scope of offer according to photo gallery

Condition: ready for operation (used), For sale is a square grinding machine in very good condition! It produced the back square of the tap! Accurate, fast machine! Selling due to lack of use! Dcsbvnsv Rlt So Tbkjg

Condition: excellent (used), Year of construction: 1958, Functionality: fully functional, machine/vehicle number: 330, grinding length: 400 mm, grinding width: 140 mm, grinding wheel diameter: 150 mm, spindle speed (min.): 3,600 rpm, overall weight: 400 kg, Equipment: documentation/manual, Machine is fully functional and in good condition Dsbvnsv H Rm Aj Tbkecg

Condition: new, WBG150 - ROGI belt sander 400V - 3 Phase Sanding belt ----- 150 x 2000 mm Belt speed ----- 33 mtr/s Dobvnega T Ihe Tbkecg Motor ----- 4 KW Weight ----- 135 KG INCLUDED * Robust undercarriage * Sanding belt

Year of construction: 2003, Condition: ready for operation (used), A total of seven similar Walter CNC tool grinding machines are available. Travel X/Y/Z: 460mm/320mm/660mm, axes: 5, rotary table swivel range: +/-200°, workpiece diameter: 320mm, workpiece length: 350mm, workpiece weight: 50kg. Spindle speed: 7000rpm, spindle diameter: 80mm, max. grinding wheel diameter: 200mm. Machine dimensions X/Y/Z: approx. 2500mm/3000mm/2300mm, weight: approx. 4200kg, control: Walter HMC 600 CNC. Documentation available. On-site inspection is possible. Individual sale possible. Dcebvov H Df Een Tbkog

Condition: ready for operation (used), Year of construction: 1966, Functionality: fully functional, machine/vehicle number: 5990, grinding length: 320 mm, grinding width: 260 mm, grinding height: 200 mm, grinding wheel diameter: 125 mm, grinding wheel width: 30 mm, overall weight: 230 kg, grinding spindle motor power: 800 W, table movement Z-axis: 150 mm, grinding spindle speed: 2,820 rpm, power: 0.8 kW (1.09 HP), Equipment: documentation/manual, Cup grinding machine UMA 19.02 with base frame Dsbjv Hcbfevn Tbkjcg Magnetic clamping plate (permanent, manual) Grinding wheel diameter 150/30 height 40 bore 27 mm 2 new grinding wheels 2 holders

Year of construction: 1978, Condition: used, grinding length 600 mm grinding width 300 - 320 mm Electromagnetic clamping plate 500 x 200 mm Important note! There is no hydraulic and no coolant unit included! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Dcebvn Tbocwic Iekjg

Condition: new, Round vibrator for slide grinding, different sizes available. New machines! Manufacturer: Eurotec Innovation GmbH Model: RA11 Gross volume: approx. 250 liters Net volume: approx. 175 liters Nominal power consumption: approx. 2.5 kW Channel width: 260 mm Connected load: 400V - 16A - 50Hz As a manufacturer of vibratory finishing systems, dryers and process water technology, we can supply you with a broad portfolio of systems for deburring, grinding and polishing. Please visit our website to learn more about our products. RA round vibrators are particularly suitable for processing bulk goods in large quantities. The workpieces are reliably guided onto the built-in sieve surface thanks to the gently rising container bottom. The large sieve surface with tangential outlet ensures reliable workpiece separation and offers the option of using magnetic separators. Depending on the component dimensions and batch quantity, the RA round vibrators are available in various container sizes with volumes from 150 to 1,550 liters. Dcobvnjhmp Dfj Tbkog Areas of application: - Vibratory grinding and polishing of bulk goods in large quantities - Rust removal, descaling, deburring, rounding - Processing of various materials (aluminum, steel, stainless steel, plastic, ...) - Fine grinding and polishing of workpieces A corresponding electrical switchgear is required to operate the system. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 0602273, grinding length: 400 mm, grinding width: 200 mm, total height: 2,300 mm, total length: 3,800 mm, total width: 2,100 mm, spindle speed (max.): 3,850 rpm, spindle speed (min.): 1,000 rpm, overall weight: 2,900 kg, Equipment: rotational speed infinitely variable, Machine with 2x flange Dsbvn Tbov H N Hzjkecg D91, B91 Any accessories can be discussed on site

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Dsbvn Tsv Sm Nqebkecg Movie with machine underpower available

Condition: excellent (used), Year of construction: 1991, EWAG WS11SP Tool grinding machine Dobvn Tov H Dr Sobkjcg including accessories see pictures

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 119504, center height: 180 mm, workpiece weight (max.): 250 kg, grinding length: 1,750 mm, center width: 1,840 mm, grinding wheel diameter: 500 mm, grinding wheel width: 100 mm, This is a premium refurbished Schaudt PF43 from GSN. The machine is equipped with an external cylindrical grinding wheel and an internal cylindrical grinding device. The machine was last serviced in 2024. The machine is currently still in use and can be viewed under power by arrangement. It is sold with a lot of accessories: here is a small excerpt: 9x grinding wheel holders 2x three-jaw chucks 1x magnetic chuck 1x three-point steady rest 3x 2-point steady rest 3x 2-point steady rest special size for large diameters 1x additional special device for dressing 3x internal grinding spindles different speeds 1x dressing roller + diamond disks 1x coolant tank Debvn Tbjv Eurtekscg

Condition: used, High gloss polishing machine Manufacturer Emme Elle Type LBA 1300 Automatic polishing machine for flat parts Working width 1300 mm 2 tables with vacuum workpiece clamping, which can be used alternately. Total work surface approx. 1300 mm x 10 m Dcebvev Ew Hmen Tbkjg Equipped with: 4 rotating and oscillating rollers, rotation speed approx. 5-25 rpm 4 rotating foam polishing pads Voltage 380 V 50 Hz 3 Ph Installation dimensions approx. 12 x 2.2 m Weight approx. 5,000 kg Machine is completely checked and cleaned when ordered.

Condition: new, Machine type: Trough vibrator TV45 Shown: TV45 including sound insulation and WS25 for component separation Manufacturer: Eurotec Innovation GmbH Rated speed: 1500 rpm Gross volume: 115 liters Inner length container: 850 mm Dcebvn Tof Sqdtjbkog Inner width container: 380 mm Inner height of the container: 395 mm Supply line: 400V - 16A - 50Hz APPLICATION AREAS: - Deburring, smoothing and polishing - Descaling, derusting and cleaning - Rounding edges - Finishing of surfaces BENEFITS: - Wiper edge to reduce component build-up on the inner wall of the container - Particularly economical, even if used only occasionally - Optionally available as a version for pressure deburring and ball polishing - Robust construction with a low-maintenance vibration motor - Integrated holder for lifting and moving the system using a lift truck or forklift truck - Quick emptying of the container and changing of abrasives thanks to a large drainage opening for abrasives - Quick-change drainage sieve made of polyurethane - Rubber-cushioned feet to reduce the transmission of vibrations The stated price is net plus 19% sales tax and plus freight. A suitable switchgear is required to operate the system. The pictures show the system including accessories, which are optionally available. The price refers to the basic machine (TV45) ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: good (used), Year of construction: 2015, center height: 180 mm, grinding length: 650 mm, !SALE ON BEHALF OF A BROKER! The machine was completely cleaned and serviced in 2021 as part of the attachment of the loading unit, including readjustment of the geometry. Technical data: - Center height: 180 mm - Sanding length: 650 mm - Grinding wheel Ø: 500 mm - Grinding wheel width max: 120 mm - Speed: 50 m/s - Workpiece headstock MK4 - Tailstock MK4 Accessories: - Marposs P7 measuring system - Joint detection and crash monitoring - Belt filter - Suction unit - Handwheel - Hydraulic tailstock with foot switch - Automation NEW IN 2022 with adjustable chains for universal use - Dresser on tailstock Dcebjvdd E Tovn Tbkjg - Glass scales in X- and Z-axis

Condition: excellent (used), Grinding range 800 x 600 x 500 mm Wheel diameter 400 mm Dcsbvn Tbsr Ezfwokog Magnetic plate 800 x 600 mm Automatic dresser Automatic balancing device Misc.accessories MARCELS MASCHINEN CH

Operating hours: 0 h, Condition: new, Mobile trough vibrator for slide grinding Type: TV25-M TROG VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross volume: 50 liters Mobile and universal - Mobile vibratory grinding system with integrated treatment of process fluids - Integrated sieve box for separating the workpiece and grinding tools - Compact design for large work containers including soundproofing - Plug & Play system: plug in the 230V power supply and get started Trough vibrators are characterized by their compact design and universal application. Their U-shaped worksheets allow very large workpieces to be machined relative to the size of the system. Our mobile TV is unique in that all the components that are required for vibratory finishing are compactly and mobile mounted on a trolley. An integrated cascade cleans the process liquid, workpieces can be separated by means of a sieve box and various grinding tools can be stored in slide-in compartments. Dcjbvnjhmp Dqe Tbksg The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: new, Year of construction: 2024, Functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm Dcjbvjtrf Smen Tbksg X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Grinding wheel right: 250 x 25 x 127 mm Dsbjcgtp Esvn Tbkecg Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: reconditioned (used), Year of construction: 1992, Functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work Dcsbvorz Nflon Tbksg carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: new, Year of construction: 2025, Functionality: fully functional, Data Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Debvn Tecgkursbkscg Center width: 380 mm Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: new, Year of construction: 2025, Functionality: unexamined, Data Machine type: TBF 650 Dcebvn Tbocwuluokeg Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 650 mm Grinding length: 620 mm Grinding wheel: 500 x 80 x 203,2 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification. Painting Once the geometry of the machine has been restored, it is prepared for repainting. All enclosures, tables and the machine bed are stripped of old paint, cleaned and repainted. Controls The machine’s Marposs E14 control unit is replaced with a Siemens 840D SL control unit. The control unit is operated via a 15” display and can be customised to meet specific customer requirements