Year of construction: 2008, Condition: good (used), Functionality: fully functional, machine/vehicle number: WAC 715 Scalar, Used peripheral grinding machine with automation. Many diamond grinding wheels and accessories. in good condition. Machine has been operated with oil Debvsr Dbm Recr Hwscg

Condition: used, Radius belt grinder Pipe grinder ALMI type AL 100 U-01 Belt grinder, belt sander Serial no.: Year of construction 2007 Sanding belt dimensions 100 x 2000 mm Motor speed 2900 rpm Drive power 3 kW Mains connection 400 Volt, 50 Hz - Clamping vice infinitely adjustable at an angle of 90° to 30° to the sanding roller - for pipes from Ø 20 to Ø 76 mm - built-in contact roller for pipe diameter 42.5 mm - 1 contact roller for pipe diameter 28 mm - 1 contact roller for pipe diameter 33 mm - Additional contact rollers can be easily manufactured by the user, rotating part with ball bearing right and left - Feed movement for pipe grinding via hand lever - Surface grinding table 400 x 100 mm with metal cover to swing open - Connection for dust extraction Ø 80 mm Operating instructions Space requirement L x W x H 1400 x 650 x 1150 mm Weight 180 kg Very good condition Djbvcjru Tttor Hwecg

Condition: used, Year of construction: 1992, operating hours: 25,000 h, Functionality: limited functionality, machine/vehicle number: 732/92, total width: 4,360 mm, total length: 2,100 mm, total height: 2,300 mm, workpiece weight (max.): 250 kg, type of input current: three-phase, input voltage: 400 V, grinding width: 400 mm, grinding wheel diameter: 400 mm, grinding length: 1,200 mm, input frequency: 50 Hz, distance table to spindle center: 700 mm, overall weight: 4,200 kg, grinding spindle speed: 4,000 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 50 rpm, frequency: 50 Hz, input current: 80 A, power: 23 kW (31.27 HP), height adjustment type: electric, disc diameter: 400 mm, tank capacity: 1,000 l, Equipment: rotational speed infinitely variable, Flat profile creep feed grinding machine Was used for creep feed grinding Equipped with: coolant cooling / steam extraction / chip separator / clamping magnet plate Control: Siemens 820 G Dsbvcrov E E Ewj Hwecg Drives: Baumüller Operating instructions available

Condition: used, Year of construction: 2025, tube diameter 16.0 - 90.0 mm width of the strips 100 mm band length 1250 mm grinding band dimension 100 x 1250 mm total power requirement 2.2 kW weight of the machine ca. 180 kg. range L-W-H 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use (!!) New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Dcebjvprv Djvcr Hwjg Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, Functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Dcjbvcov Hcblor Hwjg Motorized height adjustment has been repaired Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Year of construction: 2000, Condition: excellent (used), magnetic filter Paper filter 1,340 mm wide Tank capacity 1,300 l Pressure pump 12 bar - 200 l/min Coolant mist extraction 2,400 cmb/min Voltage 400V/ 50Hz CNC grinding machine control Unicon F error diagnosis warm-up program Work table 1,360 x 600 mm clamping surface Grinding feed 30 - 30,000 mm/min Longitudinal table stroke 900 mm Y-axis height adjustment by means of ball circulation and AC - servo incrementally 0.001 mm Vertical feed max. 1,200 mm/min Cross feed 1,500 mm/min Measuring system incremental 0.001 mm resolution Dcebvcr Hjhr R U Neweg Grinding spindle motor AC servo with 20kW Grinding wheel 400 x 100 x 127 mm Cone 60mm

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 3,550 mm, height adjustment type: electric, table height adjustment: 500 mm, workpiece weight (max.): 80 kg, grinding belt length: 7,000 mm, grinding length: 1,500 mm, grinding belt width: 150 mm, overall weight: 870 kg, extraction connection diameter: 180 mm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, type of input current: three-phase, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), input voltage: 400 V, grinding width: 950 mm, motor speed: 1,435 rpm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration Dcobvcrjtwb U As Hwog - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, Year of construction: 2007, rotary table diameter 400 mm Djbvcjvtgyfer Hwecg grinding height ? mm grinding head - power requirement ? kW total power requirement 6 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2,5*2,5*2,5 m Special Price EXW

Condition: ready for operation (used), Year of construction: 2004, operating hours: 21,321 h, Functionality: fully functional, machine/vehicle number: 0418490010, working width: 1,650 mm, workpiece height (max.): 920 mm, TECHNICAL DETAILS Workpiece thickness: 0.6 - 150 mm Working width: 1650 mm Workpiece height: 920 mm Grinding belt & drive Grinding belt width: 1670 mm Grinding belt length: 2620 mm Aggregates & performance 1st aggregate: 18.5 kW (grinding belt drive, 1 speed) 2nd aggregate: 15 kW (grinding belt drive, 1 speed) Djbvjv E Ny Sjcr Hwocg 3rd aggregate: 11 kW (disc brush - round brush) 4th aggregate: disc brush - round brush MACHINE DETAILS Weight: 7,200 kg Total connected load: 63 kW

Condition: used, Year of construction: 2025, width of the strips 150 mm band length 2000 mm band speed 1400 / 2800 U/min tube diameter 40 - 140 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 360 kg. Exhibition machine - like NEW not yet in use (!!) New price approx. 6.500 euros Special price on request - Machine video - identical machine - ?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal & vertical grinding alignment possible - 1x set of grinding rollers included in delivery (Ø 76-90-114 mm) * other dimensions optionally available for an additional charge Dobvcr Hsvprvdjwjcg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Table size 540 x 250mm Max. grinding size 540 x 250mm Dcebvcsvcm Tqor Hwog Table guideways V & flet Wheel speed 3360 rpm Dimensions of wheel D x w x d = 200 x 20 x 31,75 mm Spindle power 1,5 kW Weight 1050 kgs Dimensions LxWxH = 1680×1220×1720 mm Accessories - Motion of table in length by hydraulic, in cross direction driven by motor, wheel motion vertically by hand - Digital read out system - Magnetic table mounted - Grinding wheel mounted - Hydraulic unit - Coolant tank - Manual

Condition: used, Year of construction: 1978, Functionality: fully functional, machine/vehicle number: 118024, total width: 3,490 mm, total length: 2,680 mm, total height: 2,200 mm, type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, With Siemens control, UR-1000-1090 water cooling, several different stones. Storage cabinet is included with the machine. Available on site, during working hours on weekdays. Dsbvcrotzzt Sj Hwjcg

Condition: like new (used), Year of construction: 2019, absolutely as good as new condition, 2 external wheels, 1 internal grinding spindle Siemens control controlled B-axis suitable for Capto grinding (out of round) center width 1000 mm Dcebvevt R Awecr Hweg center height 200 mm

Condition: used, Year of construction: 1986, type of input current: AC, input voltage: 400 V, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, grinding width: 150 mm, grinding wheel diameter: 508 mm, grinding length: 1,200 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 4 m/min, travel distance X-axis: 1,300 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 370 mm, input frequency: 50 Hz, grinding wheel width: 150 mm, grinding spindle speed: 3,000 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, frequency: 50 Hz, power: 79 kW (107.41 HP), Equipment: rotational speed infinitely variable, Blohm Profimat HB 412 CNC CD profile grinder => 3-axis machine Machine control: SIEMENS Sinumerik 3G Spindle drive: 79 KW Dsbvcov Ev Hxsr Hwocg Grinding wheel: 508 x 150 (160) x 203,2 mm Machine doors: one door is automatically opening/closing Automatic balancing unit: "Hydro-Balance" Overhead dressing unit: CD / covering 150 (160) mm width dressing capacity Linear scales: installed in all three axis (X-/ Y-/ Z-)

Condition: ready for operation (used), Functionality: fully functional, power: 0.4 kW (0.54 HP), the machine can be inspected on site Sale without guarantee or warranty Dcebjv Du Rtsvcr Hwsg

Condition: used, Year of construction: 1996, center height in crank: 1,100 mm, workpiece weight (max.): 80,000 kg, grinding length: 14,000 mm, grinding wheel diameter: 915 mm, grinding diameter: 2,000 mm, quill stroke: 200 mm, quill diameter: 260 mm, workpiece weight between centers: 80,000,000 g, workpiece diameter between centers: 2,000 mm, workpiece length between centers: 14,000 mm, power: 35 kW (47.59 HP), High capacity cylinder grinder with hydrostatic guides POMINI mod. HD 402/425 - year 1996 - maximum diameter 2000mm - working length 14000mm - tip capacity 80000 kg. Possibility of complete retrofit of the machine's electrical unit, manageable updates or modifications for application change. Grinder disconnected and ready for collection. Dcsbvcretxlyxe Hwsg

Condition: excellent (used), Year of construction: 1995, Drills upto D32 to regrind With accessories and manual Dobvcr Hjuxtmaowscg Original and very good condition.

Year of construction: 1990, Condition: good (used), hydraulic surface grinding machine with automatic vertical infeed max. grinding length 670 mm Max. grinding width grinding width 280 mm Max. grinding height grinding height 400 mm Dobvcrsf Um Rao Hwjcg Table speed , longitudinal 2 - 35 m/min. Table speed , crosswise 0,3 - 40 mm/stroke Rapid traverse yes grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / special features: - Permanent magnetic clamping plate 630 x 200 mm - Automatic vertical infeed with digital display - Manual pull-off device - Coolant system - Separate hydraulic unit - Grinding wheel - Machine alignment elements Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,840 h, Functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, feed length X-axis: 1,700 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, grinding wheel diameter: 400 mm, distance table to spindle center: 950 mm, table length: 1,600 mm, table width: 600 mm, grinding wheel width: 30 mm, overall weight: 8,000 kg, grinding spindle motor power: 15,000 W, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC surface grinder BLOHM Planomat 616 HP TECHNICAL CHARACTERISTICS : Year of manufacturing : 2015 CNC control : SIEMENS 840D SL Maximum grinding lenght x width : 1600 x 600 [mm] Stroke X axis (table movement) : 1700 [mm] Min. Stroke speed X axis : 30 [mm/min] Max. Stroke speed X axis : 30000 [mm/min] Resolution X axis : 0.001 [mm] Stroke Y axis (vertical movement) : 800 [mm] Min. Stroke speed Y axis : 4 [mm/min] Max. Stroke speed Y axis : 6000 [mm/min] Resolution Y axis : 0.001 [mm] Course axe Z (transverse movement) : 560 [mm] Min. Stroke speed Z axis : 4 [mm/min] Max. Stroke speed Z axis : 6000 [mm/min] Resolution Z axis : 0.001 [mm] Min. distance spindle nose / table : 150 [mm] Max. distance spindle nose / table : 950 [mm] Grinding spindle motor power : 15 [kW] Max. diameter grinding wheel : 400 [mm] Max. grinding wheel width : 30 [mm] Grinding wheel bore : 127 [mm] Dimensions of magnetic plate : 1600 x 600 [mm] Machine dimensions : 5450 x 3560 x 2800 [mm] Supply voltage : 400 [V] Weight : 8000 [Kg] EQUIPMENT INCLUDED: x1 coolant tank + paper filtration system DGS type SBF150/650 x1 oil mist extractor (2000 m3/h) SARA type UC 2 SD/S3 x1 1600*600 [mm] electromagnetic clamping plate SAV type B-243.70 - 1600 x 600 - 13 x1 lifting dressing device for peripheral, side and profile dressing x5 grinding wheel flanges x15 grinding wheels Ø400 [mm] x1 wheel balancing bench x1 set of manuals + CD Machine visible under power in our premises by appointment. Dcebvcr Hovr Tf Eewog Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to the brands okamoto , jones shipman , jung , favretto , studer see also cylindrical grinder , lathe , machining centre , milling machine

Condition: excellent (used), Well maintained tool grinding machine with rotating grinding head for 2 different grinding wheels. Wet grinding with pump and tank. All angles adjustable. Diamond grinding wheel. Pneumatic carriage control. Dcebvcolxpcksr Hwsg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Table size 800 x 400mm Max. Grinding surface 800 x 400mm Max. distance centre of spindle to table 500 mm Table speed 5 ~ 25 m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5 ~ 20 mm Rapid power cross feed approx.900 mm/min Cross feed on hand wheel 1 rev 5mm 1 gra 0.02 mm Rapid power head elevation 450 mm/min Vertical feed with MPG 1 rev 2 mm 1 gra 0.01 mm Auto down feed (Option) 0.001 ~ 0.999 mm/time Wheel speed 1450 rpm Wheel dimensions 406 x 50 x 127 mm Spindle motor 3,75 kW Weight 3250 kgs Dimensions LxWxH = 3205 x 2050 x 1900 mm Accessories - 800 x 400 mm magnetic table mounted - Grinding wheel mounted - Integrated dressing unit - Coolant tank Dcebvcreuyk Dre Hwsg - Hydraulic unit - Manuals

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, total height: 2,750 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,500 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, Equipment: documentation/manual, CNC JIG GRINDING MACHINE HAUSER S40-400 TECHNICAL CHARACTERISTICS : Stroke X axis: 650 [mm] Max. Stroke speed X axis: 4000 [mm/min] Working feed X axis: 0 - 1800 [mm/min] Stroke Y axis: 450 [mm] Working feed Y axis: 0 - 1800 [mm/min] Stroke Z axis: 130 [mm] Min. Stroke speed Z axis: 0.5 [mm/min] Max. Stroke speed Z axis: 12000 [mm/min] Stroke frequency Z axis: max. 4 [Hz] Stroke W axis: 500 [mm] Planetary speed C axis: 5 - 250 [rpm] Max. Stroke speed W axis: 800 [mm/min] Stroke U axis (radial feed): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clearance between grinding motor and table: 585 [mm] Max. load on table: 500 [Kg] Supply voltage: 400 [V] Weight: 4550 [Kg] ADDITIONAL INFORMATION : x1 HI-CUT pack including: Dobvcr Hsvr Tdbowscg -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: good (used), Year of construction: 1984, Functionality: fully functional, Table size 2000 x 650 mm Travel 2000 x 650 mm Max. workpiece height 550 mm Magnet-size: 2000 x 625 mm Dcobeuyk I Rovcr Hwjg Wheel-dresser, cooling and magnetic separator. Machine-weight 15500 kg Machine-dimensions LxWxH = 6000 x 2400 x 2900 mm

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 170 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 14 m/min, table width: 860 mm, table length: 1,140 mm, distance table to spindle center: 750 mm, type of input current: three-phase, table load: 800 kg, travel distance W-axis: 635 mm, clearance between the columns: 970 mm, Equipment: documentation/manual, CNC Jig grinding machine HAUSER S55-400 TECHNICAL CHARACTERISTICS : CNC control : FANUC 160i-M Stroke X axis : 1300 [mm] Max. Stroke speed X axis : 1800 [mm/min] Rapid traverse rate X axis : 4000 [mm/min] Stroke Y axis : 800 [mm] Max. Stroke speed Y axis : 1800 [mm/min] Rapid traverse rate Y axis : 4000 [mm/min] Stroke Z axis : 170 [mm] Min. Stroke speed Z axis : 0.500 [mm/min] Max. Stroke speed Z axis : 14000 [mm/min] Stroke frequency Z axis : max. 5 [Hz] Stroke W axis : 635 [mm] Rapid traverse rate W axis : 1150 [mm/min] Planetary speed C axis : 5 - 300 [rpm] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 970 [mm] Djbvcr Hjvr Tcdjwocg Table length : 1440 [mm] Table width : 860 [mm] Max. distance spindle nose / table : 750 [mm] Max. load on table : 800 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -protection of the work area -mist extractor with electrostatic air filter -fire protection system (to be inspected by a qualified organization) -Cooling unit (tank + pump) with automatic belt filter x1 70S-ATC grinding motor 9000-70000 [rpm] x1 cable for grinding motor x1 MSS (Multi-Sensoric System) tool detection device x1 RENISHAW OMP400 part probe x1 set of grinding arbors Various manuals Machine in very nice condition, visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S55-400 is a high-precision CNC coordinate grinding machine, ideal for complex planetary grinding operations in environments requiring extreme precision. This machine is ideally suited to sectors such as aerospace, automotive and mould making, where finish quality and repeatability are essential. The HAUSER S55 400 excels in contour grinding operations, while being comparable to machines from brands such as Moore and Roeders. It can be integrated into workshops comprising Mägerle (Mägerle/Magerle), Studer, Röders, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. This grinding machine is the ideal choice for workshops looking for a high-performance solution to complement their lathes, machining centres and CNC milling machines. Thanks to its exceptional rigidity and extremely tight geometric tolerances, it ensures consistent results and great flexibility when machining complex parts.

Condition: excellent (used), Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table width: 630 mm, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Dcjbjvr Taiovcr Hweg Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.