Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) Available at the end of November 2025 Technical data: PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit Itedsxb U Ayopfx Agzor technotrans alpha.c dampening system Antistatic blower at the feeder head Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Condition: used, Year of construction: 2007, Offset 5 color with perfecting + coating Heidelberg CD74-5-P+LX - C Year: 2007 Number of impressions (mio): 250 Machine control - CP 2000 - Prinect Axis Control Printing units - Number of printing unit(s): 5 - Machine with perfecting: 2/3 - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening system: Technotrans beta.c - Ink temperature control Coating - Number of coating unit(s): 1 - Tresu chambered doctor blade system - Number of Anilox roller(s): 1 Drying - DryStar: DryStar 2000 IR + hot-air Delivery - Powder spray: PowderStar Itsdpfxjv Rx A Hs Agzsr Accessories - Air cabinet: AirStar - Compressed air compressor: Atlas Copco

Year of construction: 2002, condition: excellent (used), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 Itedpsd Nd T Ujfx Agzor BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Itodpfew R Enmsx Agzsr Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: used, Year of construction: 2005, Offer includes: Itedpfsv U U A Rjx Agzsr Heidelberger Printmaster 52-4, Year of manufacture 2005, Print count: approx. 143 million, Autoplate, Classic Center,

Condition: good (used), Year of construction: 2012, Heidelberg SX 74-5-P+L Year:2012 5 Color + coating unit Max size 530 x 740 mm Paper thickness 0.03 mm 15,000 sph 196 million impressions Prinect Press Center Wall screen Easy control Autoplate Interface adapters Press Center master level Press Center instant gate Press Center wallscreen application Press Center color assistant pro Press Center net profiler Press Center drystar Guide plate Alcolor with Vario Damping Programmable blanket/roller/cylinder wash Technotrans alcocontrol IPA with conv. measuring Weko powder AP 110 Antistatic feeder and delivery 50Hz/400V Acoustic package Hydrostar damp. Air cooled High pile delivery Isdpfx Aev H N Rajgzstr In production

Condition: good (used), Year of construction: 1993, machine/vehicle number: 709661, Size 35 x 52 cm, Alcolor dampening, Technotrans cooling and recirculation unit, Weko T66 powderspray, Plus version Machine no.: 709661 Itodpfjw Inu Rsx Agzjr

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Itjdpfx Agswahvajzer Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Delivery - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Itodpfoh Eii Tex Agzsr Technical data and description: see pictures

Condition: new, Year of construction: 2006, Dear Sirs, AS OWNER HEIDELBERG PM 74-2P age 2006 Itjdoxq Npmspfx Agzer Approx. 66 mill. impressions Low pile delivery Size 520 x 740 mm Speed 12.000 copie/h Paper size max 520 x 740 mm Paper size min 280 x 400 mm Paper thickness 0,04-0,4 mm Print size max 510 x 720 mm Plate size 615 x 724 mm thickness 0,30 mm Blancket size 752 x 605 mm Dimensions: L. 3,8 mt. P. 2,7 mt. H. 2,2 mt. Power Kw 20 circa Weight 8.300 Kg. Conditions: Cylinders and gears without damages Alcolor continuous dampening with Technotrans's alcohol metering Auto wash Easy plate

Condition: good (used), Offer consisting of: Heidelberg Speedmaster SM52-5P3, CP1.04, Autoplate, washing devices, 125 million impressions, perfecting unit operational!, immediately available Isdpfjw Ixtdjx Agzetr

Condition: good (used), Year of construction: 1984, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 51510274, type of input current: three-phase, input current: 7 A, input voltage: 380 V, Equipment: documentation/manual, Machinenumber 51510274 Year of built 1984-85 Itjdpfx Ajt Etitegzer Good condition, normal light-soiling Molleton dampening 2 mounting rings in NP unit NO numbering blocks included (zeiser equal to GTO, Fuji etc) Under power in our warehouse. To be delivered EXW van Rooij, loaded on your transport (LOT) Technical Data • Maximum sheet size: 381 × 520 mm • Minimum sheet size: 110 × 148 mm • Maximum printing area: 370 × 515 mm • Maximum printing speed: 10,000 iph • Minimum printing speed: 3,000 iph • Feeder capacity: 940 mm • Delivery capacity: 420 mm • Stock range: 30 up to 350 g/m² • Maximum paper thickness: 0.4 mm Printing plate dimensions: 0.15 × 521 × 420 mm Blanket dimensions: 1.9 × 524 × 480 mm • Press drive motor — power: 1.5 kW • Air pump motor — power: 1.5 kW • Electric motor delivery raising: 370 W • Inching: 120 W Machine dimensions • Length: 2,200 mm • Width: 1,185 mm • Height: 1,570 mm • Machine weight: 1,550 kg

Condition: excellent (used), Format (cm): 32x52 All existing tools will be included with the device Itsdpeh Eik Hsfx Agzer for punching and perforating as well as holders of these tools (see pictures)

Condition: used, 4 ink trays with 22-channel control from Microcolor I unit remotely (off-press controls) Itodov Nzrnepfx Agzjr

Condition: excellent (used), Format (cm): 32x46 Isdpjh Eikmefx Agzetr All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

Condition: good (used), IR dryer for 28” (50x70 cm) paper and cardboard processing, for example in the delivery of a 28” offset machine The lamp holder contains 18 lamps of 1kW; the frame in which everything is attached and soldered is liquid cooled, preferably with coolant, the warm air is treated by 2 blowers, one for supply of cool air and one for extraction of the warm air in case of paper stop or paper crash where the machine would stop with sheets in the delivery. The lamps are then switched off and hot air is forcibly extracted. Everything is clearly indicated in diagrams and that is all complete. Itedpfxsv Nzq Ro Agzer

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 664937N, Counter (m): 42 Format (cm): 32x46 Itsdegfb E Repfx Agzor Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC Itodpfxev Nwgno Agzer

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 701 235, Counter: 54,356,348 Format (cm): 36x52 Itodpfx Agjvcxxxozer Dampening: Stenz-Dampening-System

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. Ijdpfxjv Nv Tae Agzjtr We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Year of construction: 1982, condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: Ijdpfx Asivz E Tegzstr with N&P (numbering & perforating) unit Bacher control 5000

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: 6F070, total length: 1,800 mm, total width: 1,150 mm, total height: 1,600 mm, type of input current: three-phase, input voltage: 200 V, power: 3 kW (4.08 HP), overall weight: 1,400 kg, Equipment: documentation/manual, 1978 very original in excellent condition one color offset machine from the Japanese Sakurai with never used Number Perforating and Impression unit (sprayed in tectyl and deliberately not cleaned by us) is really for that time, compared to other makes incl Heideleberg's GTO46 a top class machine. Very nice and solid machine. Paper size 32 x 49 cm working with the same size plates as at that time the Rotaprint broadened models as well as Romayor and Fuji 50. The condition is so fine that it would almost be allowed in the reception room of the manufacturer. Ijdsuga U Dspfx Agzetr All documentation is included, electrical schematics are complete with legend and parts book belongs to this machine.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 1139, Print counter (m): 66,6 Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Dampening preparation: technotrans alpha.d Iedpfxsvcxwzo Agzjtr Powder device: Grafix

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 16035, Format (mm): 229x162 Max. Speed: 560 pcs / min. Paper weight (g / m2): 90 Counter : 53000 /h Performance data // Technical data The specified values are listed as the machine-technical performances using original W + D format parts and components. The achievable performance in practice depends on various parameters beyond our control, e.g. on the characteristics of the materials to be processed, the product and blank shape, window size and position of the windows, feed direction, position and type of the closure flap, as well as the print motif and printing ink. STANDARD The machine is used to print on both sides of pre-made envelopes and mailers with conventional offset printing inks. The printing units are arranged in satellite form around a central counterpressure cylinder. Power: Perfecting: perfecting: Max. 1200 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in double use Max. 700 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 162 mm in single use Max. 500 envelopes per minute for papers according to DIN 6733 with a surface mass of 60-165 g / m2 for format heights up to 229 mm in single use Max. 700 envelopes per minute for papers according to DIN 6733 Ijdoh Icf Uepfx Agzetr with a surface mass of 60-165 g / m2 For format heights up to 180 mm in single use

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 Itedpfx Aevw Ai Regzsr Speed: 13000 Sheets / h Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.