Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ibjxsrp DIEHL VS 81 Tapeless Veneer Splicer; Handles stock from 1/64" thick & 6" min. length up to 42" wide, 14 - 75 stitches/[...]: -- 1.5 HP Variable speed feed motor, 15 - 85 FPM, 42" throat, 100" x 75" table. -- Manual raise and lower temperature controls (200 - 500°) for heater bars. -- This machine was overhauled in 2012, and is ready for your production needs. more
4

Bürkle EFA 800

PetershagenGermany dealership location
6478 km
1984
used
Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984 Q8xylxmyr more
3

Rietberg KUPER EMZ/2M

Heinrich-Kuper-Straße 10-15, 33397 Rietberg, DEGermany
6468 km
1997
good (used)
"machine FUENDVERKL manufacturer Kuper type EMZ/2M part Id-no. 2240472 year of construction 1997 feed m/min. 15-35 m/min feed speed infinitely variable yes veneer thicknesses approx. 2 mm standard heating tube yes trimming yes working width 3200 mm passing width 3900 mm total connected load 3,5 kw connection 400/50 Volt / Hz E7fhtpll machine dimension 1 length 4800 mm width 1800 mm height 1650 mm weight 1200 kg site Rietberg " more
2

Veneer saw MAYER FSK

Hof, DeutschlandGermany
6760 km
1982
good (used)
Very well preserved veneer saw, cutting length 3000 mm from a training workshop. The machine was never in production use and is offered in very reasonably priced. 7vkb3ar more
1
Elect./Voltage: Bbuqhj9lnc KUPER EMZ-2 Double End Splicer; -- The cross-banding operation is done on both ends of the veneer sheet simultaneously. It reinforces longitudinally spliced veneers by means of a resistant glue thread which is applied at the ends across the grain. -- The special infeed system of the gluing heads pulls tightly together even fine end splits. This veneer edge protection avoids damage which often occurs during further [...]: -- Stitches veneers from 0.4 - 2 mm thi... more
6

Bürkle EFA 1300

PetershagenGermany dealership location
6478 km
1990
used
Manufacturer: Bürkle, Type: EFA 1300, Year: ca.1990, PVAC-Dispersions-Folienkleber: yes, Work piece length min-max mm: 500-3200, Work piece width min-max mm: 200-1300, Work piece thickness min-max mm: 3-60, Kaschiergeschwindigkeit: 25, Doppelseitig Folienauftrag: yes, Folienrollenmagazin: 1, Feeding speed continous adjustable: yes, Inlet conveyor: yes, Querreinigungsbürste: yes, Bürstmaschine längs: yes, Plattenvorwärmzone: no, Kleberauftragmaschine : yes, Abwickeleinheit: yes, Prägekalander: ye... more
6
Peeling line – Raute 3HV66 Vsd2se -Lathe 3HV66 -Logfeeder -Frame for XY -Clipper -Stacker Price 115.000 eur FOT Finland We also have: -Log feeder -Raute big size press -Steinemann sander -Sharper more
6
Real wood veneer American cherry tree in Moebelquailitaet Bwq9n The packages are from a master. Please note the PDF file with more accurate collection of individual packages. See more veneers from a loading company, resolution "more offers of this provider". more


Other
every day

New machines via email!

Be informed!
6
Peeler RFR totally recondition and in a very good shape to work, also available a three decks magazine of bobines 2800 mm. width, rolling and unrolling device and also a 2800 mm. clipper Y2dzbyh9 more
2

Cross measuring machine Metraplan

D - Nordrhein-WestfalenGermany dealership location
6504 km
used
Cross measuring machine Metraplan for Furnier Kmcrflk year of manufacture: 1996 max. veneer size 5200 mm with Kleistronik measuring unit with 1 table front table and 1 back table with spare lights more
1

4-DECK VENEER DRYER COE M62

SOUTHUnited States dealership location
518 km
1966
used
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Glmwncnns COE Model M62, Veneer Roller Jet Dryer fully complete with the following major components and features: -- Veneer Feeder and Unloader, -- 4-Decks, -- 16-Sections, -- Steam heated, -- Half of the Jet Nozzle Boxes have been changed to the M72 style. more
6
Manufacturer: Kleistronik, Type: KT 96000 Funiermessanlage, Year: 2005, Programm: Auswertungssoftware für Funierpakete, Funierparketvermessung: yes, Barcodedrucker: yes, Einlaufband: yes, Scanner: yes, Auslaufband : yes, Feeding speed m/min: 60, Software Auswertung: yes, Flächenermittlung: yes, Schnittstelle SAP: yes, Wight approx. kg: 500, Year :2005 Lrxib more
1
Log length adjustable from 1400mm to 2900mm Mzlxavnt We also have Peeling line –Raute 3HV66 -Log feeder -XY Centralation system -Clipper -Stacker -Raute big size press -Steinemann sander -Sharper more
3
SLICER TN 4000 IN GOOD CONDITIONS Pkqbgff9f more
3

Lengthwise measuring machine Metraplan

D - Nordrhein-WestfalenGermany dealership location
6504 km
used
Lengthwise measuring machine Metraplan for veneer year of manufacture approx. 1990 max. veneer size 1200 mm with Kleistronik measuring unit with spare light Guy8uyclc more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuqj9z8bl FISHER+RUCKLE Crossfeed Veneer Splicing Line consisting of the following major components and features: -- FISHER+RUCKLE Type FBM-28 Prefeeder. -- FISHER+RUCKLE Type FLM-28 Crossfeed veneer splicer, 31-1/2" to 109-1/2" (800 - 2,780 mm) max. veneer length, 1/40" - 1/16" (0.6 - 1.5 mm) thickness, 2-3/4" (70 mm) min. width, Moisture Content: 8 - 12%. -- Feed speed 8 - 28 FPM (1.8 - 8.5 MPM), approx. (40) strips per minute Finished Veneer sheet si... more
5

Guillotine Monguzzi TRM 2L

Europa - Italia Italy dealership location
7093 km
1993
used
TECHNICAL DATA: Cutting length mm: 3200 Witw0 Double knife: Yes Number of motors: 2 Total connection kW: 10 Weight Kg: 11.500 more
6

Special line for production of Honeycomb Kuper

Europe - LithuaniaLithuania dealership location
7218 km
2006
used
Made by company Kuper. Finished product: furniture elements. Construction of honeycomb board: Outside layer: veneer Intermediat layer: DMP/MDF/HDF board Internal layer: frame with honeycomb filler or without Intermediat layer: DMP/MDF/HDF board Outside layer: veneer Construction of veneered board: Outside layer: veneer Internal layer: DMP/MDF/HDF board Outside layer: veneer Dimensions of raw material: Width: 300 – 1.200 mm Length: 600 – 2.500 mm Thickness: 16 – 60 mm if board with honeycomb fil... more
1
Different Working Diameters and Working Length Equipment available from Stock. Dtqacu more
5

VENEER PEELER R.F.R. P16

SollanaSpain dealership location
6444 km
1978
used
VENEER PEELER MAKE: R.F.R. MODEL: P16 LENGTH: 2.700 M.M. DIAMETER: 1.600 M.M Wcqs9x8r2 1 HYDRAULIC SPINDLE / 1 MECHANIC SPINDLE. WITH STAY-LOG BAR. more
3
Peeling line – deroulage A.CREMONA for beech, 2700×1400 mm With coil winding and hydraulic cutter/guillotine for manual selection of material. 9iovrgsdn Logs up to diameter 1400 mm and length 2700 mm more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Bbuqjmxszj FISHER RUCKLE OMNIMASTER Feed Through Veneer Splicer; Veneer glue application with longitudinal splicing in one pass, single glue applicator. -- Veneer strip length: 133" to 29-1/2" min., veneer strip width 1-15/16" minimum. -- During production the operator has all specifications within the field of vision. All adjustments can be made without interruptions. -- Glue application: Adjustable gluing unit ensures a perfect glue application. T... more
1
1400 mm max. Diameter of Logs to peel. Bagagwtce more
5
Vertical slicer. Make: A.CREMONA Model: TZ Y9p2kmov Working width: 5200 mm more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. H8kl0jf FISHER RUCKLE SPLICEMASTER Veneer SplicerPre-glued veneer splicer . Enables high speed runs and high production numbers.• Capacity: • Working width of 47-1/2" (1,200 mm), veneer thickness of 0.4 - 3 mm (1/64" - 7/64"); min. veneer length of 11-4/5" (300 mm) to unlimited max; min. veneer width of 1-3/4" - 47-1/4" (45 mm - 1,200 mm)• Variable feed speed from 16 - 164 FPM (5 - 50 MPM).• Heating section length of 47-1/4" (1,200 mm); max. heati... more
1
Kdhfldtv7 Different working sizes; 3 or 4 BINS; FULLY REFURBISHED EQUIPMENT. more
1

VERTICAL SLICER CAPITAL 5400

SollanaSpain dealership location
6444 km
1980
used
VERTICAL SLICER. 2sdovx3lu MAKE: CAPITAL WORKING WIDTH: 5.400 M.M. more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Csrzhafq Tapeless Veneer Splicer; 1.5 HP TEFC variable speed feed motor, 15 - 85 FPM feed speed; handles stock from 1/64" thick and 6" min. length up to 42" wide. -- Equipped with: 4-Roll infeed matching roll assembly, thermostatic controls for upper-and-lower heater bars (200° - 500° F temperature range). -- Complete with: Automatic oil mist lubrication; outfeed with powered take away roll for veneer, start/stop push buttons for feed motor, and over... more
1
COMPLETE LINE with all available services. Fqylegb more
4
Dubrne Telescopic peeler make Cremona S2-P more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Sszy7o FEZER Model 3SE 3,6 1P+2R, 5-Section Veneer Press Dryer complete with the following features: -- 141-3/4" Max. drying width x 33' long drying tunnel plus 80" long cooling section, single deck top & bottom screen type feed, top screen heavier for pressing effect on the veneer (304-stainless steel B-18-12-12-14), bottom screen 304-stainless steel (B-12-12-12-14). -- Heat is generated by (5) gas fired thermal oil boilers. The thermal oil heaters provi... more
1
4400 mm working width; Kdhfbsob3 3 floors; EXCELLENT CONDITION. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Ncbzn FEZER Model FM-30, Veneer Slicer System complete with the following features: -- 12" Max. lumber slicing width with an up to 10" high cant, veneer thickness 1/85" to 3/8" and with +/- accuracy of 0.002"; fixed knife with a 75ø fixed knife bias angle. -- Upper feed beam with continuous belt feed for 164 FPM or 246 FPM, 26 HP feed motor, 6 HP head elevator motor for "rapid" dual speed up & down travel; feed head can be raised to 16" opening for easy ma... more
1
PRACTICALLY NEW EQUIPMENT, AS NEW CONDITION. Kdhccgvzs more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. Csoz2h7g FISHER RUCKLE SPLICEMASTER Veneer SplicerPre-glued veneer splicer . Enables high speed runs and high production numbers.• Capacity: • Working width of 47-1/2" (1,200 mm), veneer thickness of 0.4 - 3 mm (1/64" - 7/64"); min. veneer length of 11-4/5" (300 mm) to unlimited max; min. veneer width of 1-3/4" - 47-1/4" (45 mm - 1,200 mm)• Variable feed speed from 16 - 164 FPM (5 - 50 MPM).• Heating section length of 47-1/4" (1,200 mm); max. heat... more
1
Working Length: 4000 mm EXCELLENT CONDITIONS COLOMBO EREDI Italy Leading Second-hand Solutions Worldwide for Wood Based Panels Industries IT. Headquarters | COLOMBO EREDI & Co. S.r.l.| Via Flavio Gioia, 1 | P.O. Box 97 | Kszkh I-20852 VILLASANTA | MB | more
1
Elect./Voltage: 400 V, 50/60 Cy, 3 Ph. 3yvgixrh FISHER RUCKLE SPLICEMASTER Veneer SplicerPre-glued veneer splicer . Enables high speed runs and high production numbers.• Capacity: • Working width of 47-1/2" (1,200 mm), veneer thickness of 0.4 - 3 mm (1/64" - 7/64"); min. veneer length of 11-4/5" (300 mm) to unlimited max; min. veneer width of 1-3/4" - 47-1/4" (45 mm - 1,200 mm)• Variable feed speed from 16 - 164 FPM (5 - 50 MPM).• Heating section length of 47-1/4" (1,200 mm); max. heat... more
Working Length: 4000 mm V2izpxfuc more
1
Elect./Voltage: 240/480 V, 60 Cy, 3 Ph Bbuqhaofzb KUPER KLM Dual Glue Applicator --Dual glue applicator applies glue to veneer edges for later glue up. -- Specifications: --2" Min. x 15-3/4" max. veneer width, --15-3/4" min x unlimited veneer length --Dual vertical roll type glue applicators with glue pot reservoirs (one each side) apply glue. -- Approx. 8' long powered roll infeed, left hand fence line with multiple vertical round guides --Right hand side adjustable (in & out) for ven... more
3
4800 working width 4 sections Kxexk23n 4 decks 2 meters cooling section EXCELLENT CONDITIONS SPECIAL PRICE more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glmqok338 65" Throat cap., 3 HP gearmotor drive unit (new clutch and gear motor), automatic strip type plug-feeder, - cap. of up to (40) plugs/Min., table dimensions 39" x 47", veneer thickness 1/32" to 3/16", profile P-34 dies. -- Patch length 1.63" min. to 4" max., patch width .88" min. to 2" max., table height 35". -- Tool sequence: Veneer patch is cut by table die and scrap is ejected into discharge chutes, veneer patch blank is then positioned again... more
Complete peeling line composed by Electronic Centering and Charging Device Double Telescopic Peeling Lathe Rotary Clipper Yqjxt0 Vacuum Stacker Device more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbuqjwiynk FISHER-RUCKLE GLUEMASTER Veneer Glue Application Machine --The glue application machine, Gluemaster, applies the glue to both sides of the veneer package, in one pass, independent of veneer length. --Pressure Rollers: During the glue application, the veneer packages are pressed uniformly by the pressure rollers. Thereby it is possible to glue even difficult veneers and avoid glue between the veneer strips --Glue application dosage: During the g... more
N. 3 pieces TN/E 4000 N. 4 pieces TN/4000 Y987d23 Max. log length 4000 mm Max. log width 800 mm Max. log height 1200 mm Veneer thickness range 0.3 – 4 mm more
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bb7lbmjhob COE 4 Ft. Veneer Peeling Line with the following major components and features: -- Log cut-off saw. -- Geometric lathe charger. -- Dual spindle 4' COE Model 263 Lathe: &#9679 Diameter of outer spindle 7" &#9679 Diameter of inner spindle 4" &#9679 Max. swing 48" &#9679 Knife length 56" &#9679 Lloyd controls including motor starters &#9679 Main drive DC-AC 165 HP/200 HP -- Veneer conveyor to clipper. -- Pneumatic [...] AVAILABLE: VENTEK Veneer... more
Complete Plywood Plant V2i3pc73m more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbuqgnl0q9 Veneer patcher RAIMANN Model ASA 1650. Drive 61" Throat cap., 3 HP gearmotor with new/rebuilt drive unit, strip type mechanical plug-feeder mechanism - cap. of up to (40) plugs/Min.; thickness of veneer patchable 1/32" - 1/5" (0.08 mm - 0.2 mm) (soft woods), 1/20" - 3/16" (hard woods). P-34 dies. -- Tool sequence: Veneer patch is cut by table die and scrap is ejected into discharge chutes, veneer patch blank is then positioned against the under... more


Other
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close