Used Other presses for woodworking for sale (57)

Condition: used, Brand:Comil Type:CF2000 E+N Fgelir Raeimdx Tjvob Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine

Condition: good (used), machine/vehicle number: Code: 0168, Code: 0168 Brand: STROMAB Fjlirol Snzve Ravogb Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Condition: excellent (used), The working width of the shafts is 1400 mm The shafts are heated with grease - COREMA TM/OH - 2036 S UL device Fgjlirstpp Azs Ravsb You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. 31.2.3

Year of construction: 2008, Condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety Fgolir Raolcd Szevob even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1999, Condition: used, Membrane press Orma PM/AIR Fslirov Ukn Ae Ravsgb Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Documentation available: No - Serial number: 52850199 - Press drive: drijving_pers. Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 4500x1500x2000 mm Weight 6500 kg Fjlijv A Hmdsr Ravogb Total power requirement 2 kw

Condition: good (used), price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Fgolir Reg Uk Eisavob Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Condition: good (used), Code: 0344 Brand: VALENTINI MACCHINE - ITALY Model: 25/13 Folisu Tufwjr Ravogb Pneumatic clamp desk for drawers, wooden elements , strip panels and various materials Technical data: Work table dimensions mm 2500 x 1300 Work table height mm 720 N° 7 positionable pistons with adjustable stroke N° 8 positionable support squaring Compressed air 7 atm Overall dimensions mm 2500 x 1300 x 920 h Weight kg 980

Year of construction: 1998, Condition: excellent (used), table height: 2,250 mm, table width: 4,000 mm, Extra large heat press! For sale in excellent technical condition. Fgelijwfp R Aer Ravob

Year of construction: 2015, Condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Press bonding framework of internal and external doors " Companies Lignum-Evert Johanson --- pneumatic-hydraulic press bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded hardware give one year warranty Fjlirecczuqe Ravjgb

Condition: excellent (used), Year of construction: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Fgolir Raotgq Ibeveb Universal Gluing Stand / Frame Press Pressing area approx. L x W 3800 x 3000 mm Installation depth approx. 1300 mm 6 hand hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° Including access ladder - on casters, pull-over NEW MAGNETIC LOCKS Ideal press for joinery shops that produce frames, solid wood panels, or windows in special shapes. Equipped with various pressing elements, see photos. Note: Used Machines: • Errors in technical specifications and subject to prior sale. • Prices quoted are for pickup from location - free shipping! Prices quoted are for pickup from location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 3480x1500x2000 mm Feliev A Hk Nor Ravsgb Weight 5500 kg Total power requirement 2 kw

Year of construction: 1985, Condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN Fgolijtqqr Esr Ravjb ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: ready for operation (used), Make of press: POTTIN Manufacturer hydraulic system + electrical control: Rucks Maschinenbau Cold press - no integrated heating Type: Lower piston column press Nominal pressing force: 814 kN Pressing surface. 580x600 mm Hydraulic pressure: 7 - 180 bar Press cylinder: 1 x Ø 240 mm Closing speed: approx. 15 mm/sec Fjlir Rsulfq Njavjgb Pressing speed: approx. 7 mm/sec Opening/stroke: 300 mm Incl. operating instructions All data without guarantee

Condition: ready for operation (used), Length of the folding shutters up to 3000 mm Width of the folding shutters up to 700 mm Vertical pressure adjustable up to 8000 kg Horizontal pressure 2500 kg Fgelish Nui Njr Ravjb

Year of construction: 2009, Condition: used, SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR SOLID WOOD PANELS STROMAB MOD. SL1 - CE RULES Fgslijmzbk Der Raveb - Volt. 400/50 - Year 2009

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Fjleb Evnksir Ravjgb A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 3750x1650x1970 mm Weight 5000 kg Total power requirement 6 kw Fgelirjv A Hkpe Ravob

Condition: ready for operation (used), - max. gluing length 30m - max. gluing width 2m - height of cylinder feet 23cm Felov Hhizjir Ravjgb - lifting of finished material The machine is still in use and connected to the power supply. Possibility of dismantling and loading onto a truck.

Condition: used, Pair of hydraulic pre-assembly clamps, for chair assembly, Camam brand, SI/PM model, used, tested Fgolelmrzxsir Ravjb

Year of construction: 1999, Condition: used, SECOND-HAND CLAMP COUPLE FOR CHAIR ASSEMBLY CAMAM MOD. SIPM TTS - CE (1999) - Hydraulic pump power HP 5.5 (kW 4.0) - productivity 60-120 assambled chairs/hour Felir Rsimbvhjavogb - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Year 1999

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 4450x1550x2950 mm Weight 4800 kg Fgslir Rsvz Hy Isavob Total power requirement 1,6 kw

Condition: used, Pair of hydraulic pre-assembly clamps, for chair assembly, Camam brand, model SI/PM T-TS, used, tested. Fslepfp E Eoir Ravogb

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 3450x1550x2950 mm Weight 4500 kg Felovz Hyzeir Ravegb Total power requirement 1,6 kw

Year of construction: 2025, Condition: new, Dimensions (L/W/H) 2950x1550x2950 mm Weight 4000 kg Total power requirement 1,6 kw Fgjlsvz Hyusir Raveb