Condition: not inspected (used), Year of construction: 2001, machine/vehicle number: AB 143586, 4-SIDED MOULDER WITH 6 TOOL HOLDERS INDEPENDENT SPINDLE MOULDER MOTORS & UNIVERSAL SPINDLE Brand : SCM Type (Model) : SUPERSET XL Serial number : AB 143586 Ref : 071713 Comp 6 Year : 2001 (Photos taken before overhaul) MACHINING CAPACITIES : - Finished wood machining capacities Thickness x Width : 6 to 120 x 25 to 240 mm - Minimum single-part machining length: 450 mm - Table and infeed fence rapid adjustment: 10 mm - Feed speed: 5 to 25 m/min - Profiling capacity on 2nd lower horizontal spindle with Ø 200 tool: 15 mm - Shaft rotation: 6000 rpm COMPOSITION OF THE SCM SUPERSET XL MOULDER : - Robust cast-iron frame - Control panel - Infeed table, length: 2500 mm Floor height: 910 mm Lateral spring-loaded infeed press - 1/ Lower horizontal shaft 7.5 kW (L: 250 mm) - 2/ Right headstock 7.5 kW (L: 140 mm) - 3/ Left headstock 7.5 kW (L: 140 mm) - 4/ Upper horizontal shaft 7.5 kW (L: 250 mm) - 5/ Lower horizontal profiling shaft 7.5 kW (L: 250 mm) - 6/ Universal shaft 360° 7.5 kW (L: 240 mm) Options to the installed feed system : - Short part feeder - Pneumatic exclusion from the table for feeder unit in front of the planer spindle - Tandem quick-exclusion feeder in front of right-hand vertical unit - Quick-exclusion tandem feed unit in front of universal unit - Flange-mounted drive wheel for left-hand vertical unit with manual horizontal movement - Additional vertical roller press Other options: - Two-sector press shoe positioned after the horizonta shaft - Vertical presser shoe for use with universal shaft from below - Pump for manual lubrication of the machining table - Manual centralized lubrication - Illumination inside tilting guard OTHER FEATURES : - Power supply: 380 v. Three-phase - 50 Hz - Star-delta starting - Total installed power: 47.2 kW IN 96 A - Raise/lower motor: 0.55 kW - Drive motor: 2.2 kW - Ø 140 mm notched roller drive via cardan shafts - Pneumatic pressure on drives - Digital indicators on each setting - Axial adjustment of 2 vertical shafts: 0 to 80 mm - Axial adjustment of 3 horizontal shafts and planer: 0 to 45 mm - Diameter of tool-holder shafts: 40 mm. - Min-max diameter of profiling tools: Ø 100-200 mm - Min-max diameter of planing tools: Ø 120-140 mm - Machine equipped with 4 tool holders with 4 sharpenable knives : . vertical: Ø 120, length 2x130 . horizontal: Ø 120, length 2x240 mm. Dcjlsupzkaen H Hamjg - Electric raising & lowering with precision manual finishing - Suction: 4x Ø 120 mm & 1x Ø 150 mm - CE marked - Top & bottom emergency stop Transport dimensions: 4850 x 1650 x h. 1620 mm Weight: 2950 kg Please consult us for the supply of consumables, accessories and/or suction systems.

Condition: ready for operation (used), Year of construction: 2001, Pos. 1 BKGD-1100 Double band saw 1 pc. - Year of manufacture: 1987 - Made in Sweden - Working height: 1000 mm - Largest cutting height: 350 mm - Largest distance between saw blade and pressure side: 250 mm - Largest distance between the saw blade and the flare side: 250 mm - Smallest distance between the saw blades: 13 mm - Cutting width: 100-120 mm - Blade length: 6300 mm - Feed rate: 10-60 m/min - Motor power (saw): 2x18.5 kW - Motor power (pump): 4 kW - Firing speed: 680 1/min - Feed roller tiltable, max.: 45° - Hydraulic tank: 95 litres - Tank for cleaning fluid: 2x10 litres - Weight: 3000 kg Pos.2 Weinig E1 High-Mech feed magazine 1 pc. - Year of construction: 2001 - Feed max.: 80 m/min - Workpiece length: 1800-6100 mm - Workpiece width: 50 -230 mm - Workpiece thickness: 12-100 mm Pos.3. Weinig Hydromat 23 6 spindle planer/ profiling machine 1 pc. - Year of construction: 2001 - Working width: 230 mm - Working height: 160 mm - Play arrangement: • 1. bottom 11 kW 6000 1/ min (joint) • 2. right 7.5 kW 8000 1/ min • 3. left 7.5 kW 8000 1/min • 4. top 11 kW 6000 1/ min (joint) • 5. top 7.5 kW 6000 1/ min (joint) • 6. bottom 7.5 kW 6000 1/min (joint) - Feed rollers in the table: 3 pieces - Feed, max.: 60 m/min - Counter bearing: for 1st, 4th, 6th spindle Pos.4. pull-out magazine 1 pc. - Year of manufacture: 2018 - Hungarian manufacturer - Outfeed conveyor: 6000 mm (driven) - Cross belt: 5 rubber conveyor belt (driven) Pos. 5. Metron 05C 100/200 metal detector 1 pc. Pos.6. Weinig Rondamat 960 profile knife grinding machine 1 pc. - Year of construction: 2002 - Grinding of planing knives and profile knives - Grinding disc D: 150/225 mm - Grinding disc width: 2,3,4,10 mm - Grinding disc bore: 60 m - Grinding disc motor power: 1.1 kW - Grinding disc speed: 1700,2000,2400,3000 1/min Dceln H Herqhggoamog - with cooling unit - Working width, max.: 240 mm Pos.7. Weinig OptiControl tool measuring and display system 1 pc. Pos. 8. Weinig setting gauge 1 pc. - for planer blade adjustment in the planer head Pos. 9. Weinig Hydro planing heads, profile heads, tongue and groove set - 27 pcs. Pos.10. BÖHL Junior S-450 VA wrapping machine 1 pc. - Year of construction: 2002 - Wrapping machine for profiles and long goods - Product dimensions: • Width: 50-420 mm • Height: 20 -300 mm • Length: 1000 - infinite mm • Max. cross-section diagonal: 420 mm - PE stretch film thickness: 17-50 my - Roll diameter: 220 mm - Roll width: 125 mm - Feed rate: max. 20 m/min - Power: 3 kW - Infeed table - Outfeed table

Condition: used, Year of construction: 1991, Working width: 230 mm Working height: 130 mm Working shafts: 4 Spindle arrangement: bottom, right, left, top Motor power shaft bottom: 5.5 kW Motor power shaft right: 5.5 kW Motor power shaft left: 5.5 kW Motor power shaft top: 5.5 kW Adjustment of lower shaft: Crank Right shaft adjustment: crank Adjustment shaft left: Crank Top shaft adjustment: electric Planing heads: strip knives Feed speed: infinitely variable Dcelsuzkwnon H Hamjg Feed roller pressure: pneumatic Power consumption: Motor brake: automatic Suction connection: Machine length: Machine width: Weight:

Condition: ready for operation (used), working width: 240 mm working height: 150 mm spindles: 5 spindles set: bottom/right/left/top/bottom spindles speed: 6000 RPM spindles diameter: 40 mm minimal diameter of tool: 100 mm max diameter of tool: 200 mm motors: 3x 5,5kW; 2x 4kW; 2,2kW pneumatic pressure of feeding rolls year: 2010 Doln H Hett At Nsamecg

Condition: as good as new (ex-display), Year of construction: 2024, Working width: 510 mm Planing shaft: tersa Dsln Hsl D Rwws Hamscg Number of knives: 4 Dressing table length: 2800 mm Dressing table adjustment: lever Gap removal indicator: scale Indication hollow - pointed joint: - Dressing fence angle adjustable: yes Motor power: 7 kW machine length: 2800 mm Machine width: 1000mm Weight: 800 kg

Condition: ready for operation (used), working width 230mm working height 120mm 4 spindles two axes spindles regulation spindles diameter 40mm dimensions adjusted from panel spindles delta/star start two feeding speed table lubrication year 1998 Dcjln H Haetq Hlrjmjg

Condition: as good as new (ex-display), Year of construction: 2022, Working width: 530 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2900 mm Dressing table adjustment: lever Hollow point adjustment: no Gap removal indicator: scale Dcoln Hehpl Sze Hamog Hollow pointed joint display: - Dressing fence angle adjustable: yes Motor power: 5,5 kW machine length: 2900 mm Machine width: 1000mm Weight: 810 kg

Condition: ready for operation (used), Year of construction: 1989, Working width 300mm Working height 200mm 5 spindles Spindles diameter 50mm Spindles set: 1. Bottom – 7,5kW 2. left – 7,5kW 3. right – 7,5kW 4. top – 11kW 5. bottom – 7,5kW Feed speed max 34m/min – variator Feeder with cardan Toothened roll in the table before first head Djln H Horz Nnfoamscg Table lubrication Jointer on two last heads

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric with table positioning Display planing thickness: digital display Feed speed: infinitely variable 5 - 22 m/min Infeed roller: steel jointed pressure beam: jointed Dcsln H Haehpl T Rsmsg Pull-out roller: Rubber 2 x Table rollers: Yes Engine power: 9.2 kW Suction connection: 160mm Machine length: 1200mm Machine width: 1200mm Weight: 1000kg

Condition: good (used), working width 230mm working height 120mm 5 heads Doln H Haoiqxtismscg heads set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder feeder with cardan pneumatic pressure of rolls

Condition: new, Year of construction: 2022, Working width: 410 mm Planing shaft: Tersa Number of knives: 3 Dressing table length: 1800 mm Dressing fence angle adjustable: yes 45° to 90 Motor power: 4,4 kW Dcslei Ezrton H Hameg Motor brake: yes, automatic Suction connection: 100mm Machine length: 2000 mm Machine width: 750 mm Weight: 295kg

Condition: used, max working width 530mm max working height 180mm Dcjln H Haervhgpsmjg max working height with side heads 170mm changenable side heads rolls in the table manual regulation of side heads two feeding speed electric table adjustment weight 2600kg

Condition: new, Year of construction: 2022, Working width: 410 mm Planing height: 230 mm Planing shaft: Tersa Number of knives: 3 Height adjustment: hand wheel Display planing thickness: scale Feed speed: 7 m/min Feed roller: Steel Pressure beam: - Extraction roller: steel Dcolnsi Ezr Ee H Hamjg Table rollers: no Engine power: 4.4 kW suction connection: 100mm Machine length: 800mm Machine width: 700mm Weight: 205kg

Condition: ready for operation (used), working width 240mm Dslnerf Ty Dj H Hamscg working height 120mm 6 spindles spindles set: bottom/right/left/top/top/bottom spindles speed 6000 RPM - two last 8300 RPM two axes heads regulation spindles diameter 40mm electric regulation of working height variable regulated feeder pneumatic pressure of feeding rolls

Condition: new, Year of construction: 2022, Working width: 410 mm Planing height: 230 mm Planing shaft: Strip knife Number of knives: 3 Height adjustment: Handwheel Display planing thickness: Scale Feed speed: 7 m/min Feed roller: Steel Doln H Hajg Hf H Esmecg Pressure beam: - Extraction roller: steel Table rollers: no Engine power: 4,4 kW Suction connection: 100mm Machine length: 800mm Machine width: 700 mm Weight: 205kg

Condition: excellent (used), working width 230mm working height 160mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head Dcjln H Heqmmfusamsg variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Djln H Hjgr Udvsamocg Dressing stop angle adjustable: yes Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: like new (used), Year of construction: 2000, working width 230mm working height 120mm 6 spindles spindles set: bottom/right/left/top/bottom/uni spindles speed 6000 RPM two axes heads regulation pneumatic pressure of feeding rolls Dcsln H Haoqffa Nemeg variable regulated feeder year 2000

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Djln Hjl D Rxfe Hamecg Number of knives: 4 Height adjustment: electric display planing thickness: digital display Feed speed: infinitely variable 5 - 22 m/min Feed roller: steel pressure beam: jointed Extraction roller: Rubber 2 x table rollers: no engine power: 9,2 kW suction connection: 160mm Machine length: 1200mm Machine width: 1200mm Weight: 1000kg

Condition: excellent (used), spindle diameter: 40 mm, spindle speed (min.): 6,000 rpm, working width 230mm working height 140mm 6 spindles spindles set: bottom/right/left/right/top/bottom spindles diameter 40mm Doln H Hajp N Ehfomjcg variable regulated feeder electric adjustment of infeed fence electric adjustment of infeed table ATS fast locking spindle system EM11 feeder isn't included

Condition: new, Year of construction: 2022, Working width: 410 mm Planing shaft: strip knife Delegzln Hen H Hamocg Number of knives: 3 Dressing table length: 1800 mm Dressing fence angle adjustable: yes 45° to 90 Motor power: 4,4 kW Motor brake: yes, automatic Suction connection: 100mm Machine length: 2000 mm Machine width: 750 mm Weight: 295kg

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/bottom table lubrication pneumatic pressure of feeding rolls two axes heads regulation spindles speed 6000 RPM electric adjustment of pressure beam feeder with cardan variable regulated feeder solid silenced cabinet Dcsln Hopkwaxj Hamjg

Condition: used, Year of construction: 2008, Working width: 410 mm Planing shaft: Strip cutter Dcsln H Haeq Tcziemsg Number of knives: 4 Planer table length: 2500 mm Dressing fence angle adjustable: yes 45° to 90 Motor power: 5.5 kW Motor brake: yes, automatic Suction connection: 100mm Machine length: 2500 mm Machine width: 750 mm weight: 570 kg

Condition: excellent (used), working width 230mm Dcsln H Haspccy Aomog working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles speed 6000 rpm variable feeding speed adjustment to 30m/min pneumatic pressure of feeding rolls POWERCOM Controll infeed table length 2470mm

Condition: excellent (used), working width 230mm Djln Hsm H T Imj Hamjcg working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Memory System control table lubrication spindles speed 6000 RPM