Condition: good (used), Functionality: fully functional, working length: 3,000 mm, working width: 1,300 mm, total width: 1,250 mm, total length: 3,450 mm, total height: 2,250 mm, pressing force: 10 t, overall weight: 1,200 kg, ORMA beam press brake Specification: • condition - used • maximum gluing dimensions - 300 x 130 cm Cgobuevkxxue Rwkajt • minimum gluing height - 31 cm • foot pedal to control the pistons (separately vertical, separately horizontal) • 8 cm wide beams • two vertical pistons with a diameter of 45 mm and two smaller horizontal pistons with a diameter of 25 mm • max. vertical piston pressure - approx. 10,000 kg • max. horizontal piston pressure - approx. 3,500 kg • 2.2 kW pump motor • overall dimensions 345 x 125 x 225 cm (length x width x height) • weight approx. 1200 kg Additional information: • good technical condition • stable and very strong construction • chains for adjusting the lower beam included • the machine worked in a carpentry shop until its last days, so it has acceptable signs of use, but does not require a major financial outlay and is immediately ready for further work • the price does not include VAT and transport costs

Condition: ready for operation (used), SECOND-HAND GLUEING PANEL HOT PRESS ITALPRESSE MOD. GB 13 - Working dimensions 3500x1600 mm Csbu Rwkernkl Ieasgt - Loading and unloading table - Heating system diathermic oil 120° - Side hydraulic cylinders - RECONDITIONED

Condition: used, Ormamachine model LS CA T1 panel press comprising: Cgoboq H S Ixju Rwkast - Feeder; - Press; - 1st cutting group; - 2nd cutting group; - Unloading.

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) Cgjbujd Nnwls Rwkast - Special pressing units + 2.950 € net ---

Condition: ready for operation (used), Heavy hydraulic press Csbu Rwkeu R U Szjasgt

Year of construction: 2000, Condition: ready for operation (used), Columbus C S Contura Cgebu Rjvg Inkswkast Permanently elastic press cushion for every veneer press 2200 x 1000 mm

Condition: new, Year of construction: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD THE ADVANTAGES FOR YOU AT A GLANCE: - Fully automatic 24h operation possible - Long service life - Low maintenance costs - Compact construction - Direct incorporation into existing production facilities possible - More than 35 years’ experience The RUF LIGNUM Classic wood briquette press is ideally suited to briquetting medium quantities of wood chips that are produced as a waste product of the wood processing industry. Thanks to the process of briquetting, additional revenue can be earned and storage and transport costs are cut. Another advantage can be found in the flexibility of our wood briquette presses. They can press various grain sizes of material into high-quality briquettes, completely without the use of binding agents. As a result, as a valuable source of energy, RUF briquettes actually have a higher utilisation value and an optimum CO2 balance. Our LIGNUM range also performs well in terms of having a high level of energy efficiency and a low level of wear and tear, thanks to our innovative RUF hydraulics. Cgsbu Rwsnxkrbjkast - Max. throughput rate (kg/h) Wood: 410 - Power (kW): 30 - spec. Pressure, max. (kg/cm²): 1700 - briquette formats (mm): 150x60 - Size (m) Lenght x Width x Hight: 2,1 x 1,9 x 2,0 - ca. weight (t): 3,3 t - with suction hoods - PACKAGING TABLE is GRATIS

Condition: used, SECOND-HAND HOT PRESS KOLMAG - Platens dimensions 2500X1300 mm - N. 4 cylinders Cjbu Rsrnkmajwkaegt

Condition: used, Veneer press OTT Cgobu Rovdaymowkajt Type JU 60S Pressing area max. 225x120 cm Electric

Condition: good (used), Refurbished machine Basic machine starts at a price of 147.700 € net *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 14 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Csbu Rwke E Dqujaogt Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: excellent (used), Minda 2500/1300 400 mm 90 T electric plates Cgjbu Retwp Scswkaet

Condition: new, Year of construction: 2025, Dealer wanted! Tariff number: 84659600 Briquette diameter: 70 mm Front bushing: 120 mm Briquette stroke max.: 100 mm Briquette stroke opt.: 80 mm Throughput (depending on material): up to max. 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil quantity: 220 liters Silo diameter: 1200 mm Silo shape: 12-corner Silo content: approx. 1.0 qbm Pump: 75 liters Cgsbu Rovucclswkajt Hydraulic pre-compressor The feed must be free of metals and mineral contamination. Damage to the pressing tools and/or increased wear may result.

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min Cebjh Tm A Esu Rwkaogt adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: used, SECOND-HAND UPHOLSTERY PRESS OMA Cgjbu Rwornkmhjkast

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Press panels in very good working condition. Cgsbjt Uduxou Rwkajt

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Cobu Roqd Uy Aowkajgt Weight: 3000 kg Total power: 33 kW

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Number of manual hydraulic cylinders vertical: 4 Number of manual hydraulic cylinders horizontal: 2 Press pressure: 1500 kg Cgjbeiwfhweu Rwkajt Machine length: 4000 mm Machine width: 750 mm Machine height: 2250 mm

Condition: new, Year of construction: 2025, Dealer wanted! Tariff number: 84659600 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (depending on material): 30-60 kg/h* Cebu Rwovuccfskasgt *depending on bulk density *based on a bulk density of 200 kg per cubic meter Engine power: 5.5 kW Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil quantity: 110 liters Silo diameter: 1000 mm Silo shape: 12-corner Silo content: approx. 0.7 qbm Pump: 27 liters Hydraulic pre-compressor The feed must be free of metals and mineral contamination. Damage to the pressing tools and/or increased wear may result.

Condition: new, Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Csbu Rwkodpbn Ajajgt Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

Condition: used, SECOND-HAND MOLDING PRESS VILMAR Cgobu Rwkjrm Ry Ueaet - Plates dimensions mm. 900x500 - N. 3 cylinders

Condition: excellent (used), Functionality: fully functional, Tiger TM/8-E hydraulic veneering press Cebuevgmmre Rwkajgt Shelf length 3300mm Shelf width 1300mm Maximum charge height 400mm Press on 8 cylinders Cylinder diameter 70mm Shelves heated with water Machine weight 4600kg Machine dimensions 403x153x208cmH

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Cgebu Rslnanwewkaet

Condition: as good as new (ex-display), Year of construction: 2024, Pressing area: 3000mm x 1300mm Opening: 450mm Heating: electric / thermal oil maximum temperature: 120° plate surface: stainless steel Press opening: automatic - timer / manual Emergency stop: yes pull cord Cobu Rwkohpl U Ioaogt Press pressure: 120t Number of cylinders : 6 Current consumption: 36A Power consumption: 21 kW Machine length: 3600 mm Machine width: 1800 mm weight: 4500kg

Condition: used, SECOND-HAND BENDING PRESS MENON - Working dimensions 1640x1000 - Opening 750mm Cgebu Rwkjrm Rz Ieaet - N. 4 cylinders

Condition: new, Year of construction: 2023, Pressing area: 3000 mm x 1800 mm Execution: wall mounting Cgobuoiwfhzs Rwkaet Number of manual hydraulic cylinders: 3 Pressing pressure: 1500 kg Cylinder stroke: 60 mm Hold down: 1 Machine length: Machine width: Machine height: