Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Djlneu Uhq Ao U T Hfsut Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor:6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Year of construction: 2001, Condition: excellent (used), vertical longitudinal feeder on pneumatics for planers and drills, after renovation, new electrics Djlevcac Sjn U T Hfjut

Condition: good (used), Year of construction: 1994, MEBA type TBM 12.5 immersion system - 12.50 m long x 1.22 m wide x 1.25 m high, clear dimensions; - Year of construction 1994; - Control TBS 6.9 with program selection, - Wooden support 7 m long, hold-down device 6 m long; - with drip tray, - the system is fully functional, but the paint in the pool has peeled off in some places. peeled off in some places. - Weight approx. 9.5 tons - Transport dimensions approx. 13.15 x 2.10 x 2.67 m - Operating instructions and documentation in German - Plant is empty, free truck! - max. package dimensions 0.75 m high x 1.10 m wide, - loaded free on truck!!! Second-hand dipping plant, product MEBA type TBM 12,5 Dipping basin: 12.50 m long, 1.22 wide, 1.25 high (inner dimensions), year of manufacture 1994, Automatic microprocessor control unit including 16 programs to select the operating cycle and operating time and integrated overflow protection. Wood rest: 7.00 m long, 70 tons carrying capacity, Holding-down clamp: 6.00 m long, Collecting basin: 13.25 m long; 2.10 wide; 1.05 high (outer dimensions), The dipping basin and the drain pan form one unit. Doln U Tju E H Tyo Hfsut Total weight of approx. 10.00 tons, Transport-measure: 13.25 m long, 2.67 m high, 2.10 m wide, Plant works, however the paint has peeled off in individual areas of the basin, wood rest and the holding-down clamp. The plant is empty, loaded free truck. The maximum package size that can be dipped is 0.75 m high x 1.2 m wide.

Year of construction: 2001, Condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit. Djlnortn Nzs U T Hfout

Condition: not inspected (used), WD FR8RM edging line - maximum length of wood 7000 mm - minimum timber length 1100 mm - width of wood max 700 mm - maximum height of wood 100 mm - made in Germany TECHNICAL PARAMETERS: 1 cascade cross feeder - total length 7250 mm - total width 2100 mm - distance between chains 300 mm - five sections with chain - motor power 4 kW - six drop chains 2 cross feeder - total length 7000 mm - total width 2300 mm - feed motor power 0.75 kW - material levelling saw - power of saw engine 2.2 kW - blade diameter max 350 mm - cutting height 80 mm 3 centering roller table - total length 7000 mm - total width 160 mm - five bottom drawing rollers Deln U Tstwmlaj Hfsut - roller diameter 160 mm - length 1000 mm - four hydraulic top presses - six material centering clamps - hydraulic feed 4 WD edging machine - motor power 55 kW - two moving sleeves - sleeves length 60 mm - max diameter of discs 400 mm - disc spacing hydraulic - four bottom pulling rollers - two top trailing rollers 5 drop receiving table - total length 7850 mm - total width 1200 mm - four top presses - 70 mm prism guide - hydraulic feed

Condition: refurbished (used), Year of construction: 2017, Söderhamn Eriksson Band Sawline 3 quad saw grups included reducers, 120 mm – 500 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 5.5(6.2) m. Feeding speed of the sawing line can be adjusted from 25 m/min to 90 m/min. - Top diameter: 120–500 mm - Maximum log diameter: 550 mm - Cant width in Chipper Canter 1: 75(82)–410 mm - Cant width in Chipper Canter 2: 75(82)–410 mm - Saw kerf: 2.7–3.2 mm - Chip length: 20–30 mm Sawline: 1) Log infeed 2) Butt-end reducer 1200mm 3) Debarker Cambio 850 (six tools) 4) 3D log sacnner (rema logbark) 5) Automatic log turner 6) Customill sawgrup 1 included reducer (4 bands) 7) Bord separator (first sawgrup) 8) Reducer 2 Söderhamn/Kocum 240-12 9) Customill sawgrup 2 (4 bands) 10) Bord separator (second sawgrup) 11) Customill sawgrup 3 (4 bands) 12) Edger line 1 Söderhamn Edgar 5200 (up to 35 pcs/min) 13) Edger line 2 Catech/Arivislanda (up to 40 pcs/min) 14) Gunnarssons combisorting line 40 pins (trimming 3 dm stepps) 15) Renholmen stacker W=1,6mH=1,6-1,8mL=5.6m 16) Automatic stick layer system of stick placers (25x50x1630) Waste handling conveyors Deljl Snpcon U T Hfsut electric and control system, hydraulic systems included.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 11265, cutting height (max.): 300 mm, working width: 450 mm, Year of construction 2002 maximum length of wood feed table: 13+m maximum wood length take-off table: 13+m 1. Undertable pivoting saw 2. 5 axis Universal mill Typ UF 5 - W plan cutter head 350 x 60 mm - dovetail cutter 60 x 38 mm - finger cutter 3. Free place for universal mill 4. Combi support with 3 vertically working drill units - WT 363 3,0 KW 1500 U/min - WT 362 2,2 KW 2850 U/min - WT 362 2,2 KW 2850 U/min 5. Combi support with 3 horizontally working tools - standard slot cutter width 8 mm length 630 mm - Drill unit 2,2 KW 2850 rpm ; drill 7 x 460 mm - Pivoting drill unit(0°-45°) 2,2 KW 2850 rpm drill 14 x 630 mm 6. Timber beam turning station Duolsr Aiyisn U T Hfst 7. 3 Marker - 1 in front - 1 back - integrated in the table 8. lift table 4000 Kg 9. loading conveyor 2,2 mtr ( 5 Arms) 10. unloading 6 arms OPTIONAL: LIFTINGTABLE 4000 Kg = +10.000€

Year of construction: 2014, Condition: reconditioned (used), Parameter Unit Value Technical data Number of cutting systems kpl. 1 Horizontal clearance mm up to 600 - according to order Vertical clearance mm max. 360 Main motor kW 7,5 Feed motor kW 0,55 Lifting motor of cutting system kW 0,55 Feed adjustment m/min continuously adjustable Conveyor belt pcs. 1 Length of band saw mm 4010 Width of band saw blade mm 32 - 50 - according to order Dsln U T Hsttic Ssfjut Thickness of band saw blade mm 0,9 -1,25 Module mm 22,2 Length of working table mm 3000 - standard Width of the working table mm 230 Height of the machine m 2,50 Machine width m 2,25 Machine length m 3.0 Weight kg 700 net price vat invoice machine after major renovation

Condition: used, Chain conveyor IDC000114 - length: 17 m - width: 1000 mm, - electric motor: 11 kW - height: 850 mm - used for wood chips and saw dust Dusln U T Hsvldl Ajfst

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. Dujlnonygvrj U T Hfot 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: excellent (used), Year of construction: 1993, Functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm Dusln U T Hot Hf T Hefjt TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: good (used), min width of the middle prism after cutting 80mm max width of middle prism after cutting 280mm electric saw advance diameter of spindles 70mm max diameter of circular saw blade 800mm max cutting height 260mm max number of circular saws 2 pcs length of feeding track 5000mm engine power 2x15kW Dujln U T Hju Evquefst

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, The Neva TR 88 is a vertical thin-cutting frame saw often used for precise and efficient wood cutting, especially in the production of thin wood strips such as lamellas. It is a machine valued for its durability and accuracy, making it an ideal tool for industries producing materials for multi-ply boards or door panels. Technical specifications: - Cutting width: 150 mm - Cutting height: 45-200 mm - Thickness of cut: 1.3-1.4 mm - Number of frame strokes: 450 strokes per minute - Power of main motor: 11 kW - Feed speed: 1.5 m/min (continuously adjustable) - Central lubrication system - Minimum material length: 250 mm - Dimensions (L x W x H): 2500 x 750 x 1650 mm Duoljukg H Asn U T Hfot - Weight: 2200 kg This saw is distinguished by its ability to make thin cuts with high precision, making it an ideal choice for manufacturers of multi-layer wood panels. In addition, the machine is very versatile thanks to its simple saw frame changing mechanism.

Condition: new, Agrosilva produce scrapper conveyors according customer needs Scrapper conveyors for wood chips, saw dust and bark. Duolnju Trrzs U T Hfst Width up to 1200 mm Length up to 50 m

Condition: good (used), Swedish multi-saw ARIVISLANDA DS74+1 - 160kW; Dismantled in March 2024 from a working line ; 4 hydraulic servo floating saws; Technical condition as in the photos. Deletrxgbon U T Hfeut

Year of construction: 2014, Condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m Doln U Tsmv Ekys Hfsut TECHNICAL PARAMETERS: main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), The machine is fully operational, more information will provide by phone Duelouz H Txjn U T Hfjt

Condition: excellent (used), Year of construction: 1978, Scholz AUTOCLAW Wood autoclave is a specialized device used for pressure impregnation of wood. It is a hermetic chamber in the shape of a large, thick-walled tube, in which the process of saturating wood with protective agents is carried out. The impregnation process in autoclaves takes place in several stages: 1. the wood is placed in a sealed chamber. 2. a vacuum is created, removing air from the wood cells. 3. the chamber is flooded with impregnant. 4.Then high pressure is created, injecting the protective agent into the structure of the wood. 5. Finally, vacuum is again applied to fix the impregnant. Pressure impregnation in autoclaves ensures deep and even saturation of wood with protective agents, which significantly increases its durability and resistance to degrading agents such as moisture, insects and fungi. Wood treated in this way can last up to 20 years in harsh outdoor conditions. Duoln Uot Tq Sze T Hfot TECHNICAL DATA: Manufacturer: Scholz Year: 1978 Capacity: 44,200 liters Weight: approximately 30 tons Length: 14.5 m Width: 2 m Inside cart rails Pressure: 16 bar Operating temp.: 203 degrees Autoclave with full accessories, in very good condition

Year of construction: 2024, Condition: new, Log deck for small logs Width total ca. 4 m Length total ca. 3.5 m Chain way 4 pieces Chain way width ca 3.8 m Chain way length ca. 3 m Motor 3 kW Duoln U T Hsu Rqn Esfst

Condition: good (used), Double saw for cutting side boards behind the canter. Good condition. Circular saw motors 2x 45kW; Saw spacing by hydraulic servos. Feed rate 60m/min. Doln Ustrxlkj T Hfeut

Condition: good (used), Barking diameter up to 66 cm 26kW motor Delneumflve U T Hfjut

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Trak Laimet 120 Technical condition: very good Technical data: - Total length that the tables 15.5 m - Width 2.2 m - Cutting length: 8 m - Maximum diameter: 70cm - Lower motor 30kw - Upper motor 18.5kw Dujln U Tety A Atj Hfjt

Year of construction: 2024, Condition: new, Roller conveyor/V conical ribbed or slick rollers for small logs and wooden posts Conveyor total length ca. 5.7 m Conveyor total width ca. 0.7 m with covers Main frame width 0.5 m Drive 1.5 kW V-roller conical with blades roll edge diameter 290 mm roll center diameter 160 mm Dujlnju Rp Ahj U T Hfjt roll length 300 mm

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Djln Ustuyr Io T Hfout Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: excellent (used), Functionality: not functional, Söderhamn Eriksson sawmill line including log handling and log sorting line. The line consists of two sets of band saws: for bundling and for sawing the bundle, and is the first line so configured in Poland. The line includes: Log handling line including sorting: 1. log feeder 2. root inflow reducer 3. measurement of the thickness of the material calculates m3 4. cross-cutting machine 5. metal detector 6. 13 boxes for logs Doln Uorm Au No T Hfjut 7. HDS gripper 8. debarker + bark chipper 9. conveyors of material to the sawmill line Length approx. 120m Söderhamn Eriksson lumber line: 1. debarking machine 2. bundling trimming machine 3. 4 - band sawmill 4. 3-belt bandsawing machine 5. edging machine 6. timber sorting machine 22 pockets 7. lumber stacker 8. feeders and receivers ( Drawing of the line layout can be found in the attachments) Equipment: 1. wide-belt saw rolling machine 2. wide-belt saw sharpener 3. compressors 4. rolling machine 5. several band saws Wooden hall with dimensions: Length: 72m Width: 28m Height: 8m The new set is a cost of approx. 12 million euros. About 50 trailers are needed to transport the whole thing. To arrange a viewing, please contact us in advance.