Used Vertical turning lathes for sale (194)

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, travel distance X-axis: 626 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, workpiece diameter (max.): 260 mm, Equipment: documentation/manual, Tools in the pictures are included in the sale. TECHNICAL DETAILS Control: SIEMENS SINUMERIK 840 Speed: 5,500 rpm Swing diameter: 260 mm Travel path - X: 626 mm Travel path - Z: 250 mm Spindle bearing diameter: 32 mm Nominal speed: 1,200 rpm Rapid traverse speed X-axis: 60 m/min Rapid traverse speed Z-axis: 30 m/min Turret positions: 12 pieces MACHINE DETAILS Cgelevvt A Sen Hpfcot Machine length: 1,685 mm Machine width: 2,400 mm Machine height: 2,850 mm Machine weight: 8 t EQUIPMENT - Spindle head with short taper DIN 55026: A6 - Pallet conveyor WPS - KNOLL system (2010) - SAUTER turret (12 places) - Documentation available

Condition: used, Year of construction: 2013, Technical details: turning diameter: 250 mm swing diameter: 250 mm turning height: 200 mm total power requirement: 37,7 kW chuck diameter: 315 mm spindle speed max.: 5500 1/min travel -x axis: 625 mm travel -y axis: +100/-80 mm travel -z axis: 250 mm worktool system: VDI 30+40 weight of the machine ca.: 8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm Cgolsvxuc Een Hpfcst and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining. *

Condition: used, Year of construction: 2001, Technical details: turning diameter: 300 mm swing diameter: 350 mm turning height: 275 mm x-axis: 925 mm z-axis: 250 mm clamping chuck diameter: 200 mm Feed speed: 30 m/min. total power requirement: 45 kW weight of the machine ca.: 7 t Cgolnovb Dq Do Hpfcjt Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories *

Condition: good (used), Webster and Bennett 48” CNC EV Vertical Borer Serial No. 8008 Year 1988 Siemens 840Di Control Table 48” Max swing 60” Cgsln Hpotv Nm Refcot Max height under elevating rail 40” Ram type machine with ATC, Swarf Conveyor, Full Surround Guarding, Coolant Pump Main motor 44KW

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Manufacturer Scherer Feinbau Type VDZ 220 DS Year of manufacture 2010 Control Siemens Technical data Chuck diameter mm 315 Drive power (100%ED) kW 37.7 Torque (100%ED) Nm 300 Max. speed rpm 5500 X-stroke mm 625 Y-stroke mm +100/-80 Z-stroke mm 250 Tool system VDI 30+40 Spindle interface A6 Cgjln Hpfevu R I Njcot

Condition: good (used), Year of construction: 2011, For sale is an EMAG VL 5i F ex location Cgoln Heup Tinjpfcet

Condition: as good as new (ex-display), Year of construction: 1997, machine/vehicle number: 1MB241H-6D-A111-A1, spindle speed (max.): 5,000 rpm, input voltage: 380 V, overall weight: 400 kg, power: 18 kW (24.47 HP), Spindle from Weiss GmbH, type 174405B, year of manufacture 1997. Cgjlnstq H Suo Hpfcet Unused, stock. For further details see type plate / pictures. Packaging and loading included.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 103345, - Control Siemens Sinumerik - Chip conveyor Knoll Cjlnjhur Sko Hpfcsgt Frequency: 50 Hz Operating voltage: 400 V Connected load: 43 KW Rated current: 78 A

Condition: used, Year of construction: 2010, Make RASOMA Model DZS 250-2 Year of Build 01.2010 Technical Details: Control SIEMENS SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Technical Details: Control CNC » SIEMENS » SINUMERIK 840D Spindle Speed 3.500 rpm Turning diameter 260 mm Turning lenght 400 mm Tool Capacity 12 x Tailstock No Chuck Celn Hpokyth Isfcsgt diameter max. 260 mm Sled path X (per sled) approx. 900 mm Slide path Z 400 mm Turning spindle unit Spindle head A 6 (DIN 55026) Diameter in the front bearing 120 mm Spindle bore 38.1 mm Main drive Motorized insertion spindle with AC built-in motor, water-cooled, infinitely variable lubrication Lifetime grease drive power at 100% ED 28.3 kW at 40% ED 36 kW Speed ​​range 3500 rpm Torque on the turning spindle max. at 100% ED 300 Nm Feed drive X-axis via linear motor 1FN3 Rapid traverse speed 100 m/min Feed force 6915 N Z-axis via 1FT6 AC servomotors Rapid traverse speed 30 m/min Ball screw diameter 40 mm Feed force » 8 kN Tool system Disk turret tool holder mount VDI 40 tool positions 12 tool disk SW 320 position measuring system X-axis incremental linear length measuring system LC 183 Compressed air connection 6 bar Dimensions Length 5.276 mm Width 2.400 mm Height 3.310 mm

Condition: good (used), Webster & Bennett CNC Ram Type VTL Year 1986/2005 Table 1500mm dia. 10 Station Automatic Tool Changer Max Turning Dia 54” Celnetv Nm Do Hpfcjgt Fanuc Oi-TC Control Fully Enclosed Guards Automatic Tool changer Tooling Table Jaws Swarf Conveyer

Condition: good (used), Year of construction: 1952, Functionality: fully functional, feed length X-axis: 2,500 mm, feed length Y-axis: 1,600 mm, workpiece weight (max.): 12,000 kg, VTL SK25, complete Cgelovulczon Hpfcjt

Condition: refurbished (used), Plate diameter 1300 mm Max. turning diameter 1900 mm Vertical traverse travel 1200 mm Max. turning height on chuck 1700 mm Chuck motor power 52 Kw Revolutions of the plate: RANGE 1 0-100 Rpm RANGE 2 0-400 Rpm Vertical travel Z axis 700 mm X-axis transverse travel 2650 mm Driven tool 24 Kw Driven tool revolutions: RANGE 1 0-400 Rpm RANGE 2 401-2000 Rpm C-axis with Heidenhain angular encoder +-5". 6-spindle changer for turning tools. One of them with CAP-TO C-6 with two outputs. 2 pallet changer for the chuck. Cgoln Hpfomdqibscot Machine repaired and mechanically adjusted. CNC and digital drive to be chosen by the buyer.

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Celn Hjia Rtdjpfcjgt Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2016, Condition: defective spare-parts repository (used), Offered is a VTC 250 shaft turning machine, which has four axes. Two turrets with eleven tool places each are installed in the machine. The machines were decommissioned several years ago and subsequently put into storage. As you can see in the pictures, the VTC will be sold in untested condition as spare parts carrier. The control system of the VTC 250 is no longer present in the machine. Other accessories such as chip conveyors, coolant systems or workpiece transport systems are not part of the advertisement. Cgjln Hsk Rumqspfcot TECHNICAL DATA workpiece diameter: max. 100 mm workpiece height: max. 630 mm TOOL CARRIER 2x EMAG turret, each equipped with 11x VDI 40 without driven tools + 1x gripper Price and delivery time of the machine after arrangement.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 97128, travel distance X-axis: 625 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 5,500 rpm, turning diameter: 250 mm, turning height: 200 mm, clamping diameter: 315 mm, TECHNICAL DETAILS Control: Siemens 840 D turning diameter: 250 mm Rotation diameter: 250 mm Turning height: 200 mm Chuck diameter: 315 mm Travel distance X-travel: 625 mm Y-travel: +100 / -80 mm Z-travel: 250 mm Spindle Spindle speed (max.): 5,500 rpm Drive power of the synchronous spindle: 37.7 kW Max. Torque: 300 Nm Tool system Tool system: VDI 30 + 40 Machine bed Material: Hydropol (special concrete and steel) Celnjuyi Icj Hpfcegt Typical components: Ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings, joint journals, MACHINE DETAILS Machine weight: approx. 8 tons Total power requirement: 37.7 kW Note: Machine is set up but not connected & can be inspected under power on request

Condition: excellent (used), Year of construction: 2017, operating hours: 32,952 h, Functionality: fully functional, travel distance X-axis: 850 mm, controller model: Siemens 840D-SL, EMAG VERTICAL TWIN-SPINDLE TURNING CENTER - VSC 160 TWIN Csljui Hm Sjn Hpfcegt Machine was in production until 08/2024 (interlinked with several machines) Available immediately System is dismantled ready for transport Self-collection at the Haldensleben site Optional loading/transport can be offered

Year of construction: 2007, operating hours: 63,000 h, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS Cgslnsmrqtve Hpfcot X-way: 725 mm Z-way: 200 mm chuck diameter: 160/200 mm swing diameter: 725 mm Main spindle: 2 pieces Control: Siemens 840D spindle flange (DIN 55026): 5 size Spindle bearing: 80 Ø - front Maximum speed: 6500 min-1 spindle distance: 955 mm Main drive: 2 pieces AC asynchronous motor 44/100 % ED: 24/16 kW Maximum power: 24 kW Full power from spindle speed: 1500 min-1 Torque 44/100 % ED: 153/102 Nm Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force in X and Z: 5.5/11 kN Ball screw diameter in X/Z: 50/40 mm Typewriter turret straight shank adaptor DIN 69880: 2 x 12 pcs. Shank diameter: 40 mm MACHINE DETAILS Operating voltage: 400 V Control voltage direct current: 24 V Control voltage alternating current: 230 V frequency: 50 Hz Connected load: 45 kW Supply line fuse: 100 A machine length: 3500 mm machine width: 2300 mm machine height: 2500 mm machine weight: 12000 kg Operating hours: 63000 h EQUIPMENT Documentation Hinged chip conveyor Coolant cleaning with 2 pumps Cooling system 2x jaw chuck

Year of construction: 2010, Condition: ready for operation (used), Lathe CTV 250 - R Manufacturer DMG Gildemeister Serial number 6860000451 Switch-on hours: 46.491 Cgeln Hoi Ewq Sopfcjt spindle hours 30.748 floor space 4m x 3m optional cooling unit for connection of two CTV 250

Condition: refurbished (used), Year of construction: 2012, Offered is a vertical turning and grinding center EMAG VSC 250 DS. The machine will be mechanically overhauled and rebuilt by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER Cgoln Heh Tkdqepfcet EMAG wheel turret, 12x VDI 40 console with grinding spindle 18 kW, 45000 1/min Delivery time and additional equipment of the machine on request.

Condition: excellent (used), Year of construction: 2017, operating hours: 39,603 h, Functionality: fully functional, controller model: Siemens 840D-SL, VERTICAL TWIN-SPINDLE TURNING CENTER - EMAG VSC250 TWIN Csln Hpsuiw E Sofcogt Systems (operating hours and wear similar): 3x VSC250 TWIN available Machines were in production until 08/2024 (interlinked with several machines) Available immediately Systems are dismantled ready for transport Self-collection at the Haldensleben site Optional loading/transport can be offered

Condition: good (used), Year of construction: 2016, Offered is a vertical CNC-turning machine VLC 100 with the year of manufacture 2016. The machine is ideal for the production of chuck parts with a diameter of max. 100 mm. With its integrated automation and the pick-up spindle, the machine is characterized by short distances and ensures short chip-to-chip times. CONTROL Siemens 840 DSL TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm Chuck diameter: 160 mm Swing diameter: 210 mm Strokes X / Z: 650 / 375 mm MAIN SPINDLE power (40% / 100% ED): 16.7 / 14.5 kW torque (40% / 100% ED): 74 / 55 Nm Cjlonmywksn Hpfcsgt speed: max. 6,000 rpm Rapid-traverse rate X / Z: 60 / 30 m/min TOOL CARRIER EMAG wheel turret, 12x BMT55 for driven tools Price, delivery time and equipment of the machine on request.

Condition: repair required (used), Year of construction: 2003, Functionality: fully functional, Vertical lathe SCHUSTER Futureline VTM 350 8x Schuster VTM 350 available Available from 03/2025 Coln Hpju Dlpdefcjgt System is currently still connected, in production and can be inspected. The system is currently operated interlinked (2x VTM 350 and 1x assembly machine) Self-collection at the Haldensleben site - professional transportation from the hall The system is offered disconnected and dismantled from the interlinking.

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, year of last overhaul: 2023, Offered is a VSC 250 vertical turning center, which has been mechanically and electrically overhauled by EMAG. The control system was upgrated to Siemens Sinumerik One. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens Sinumerik One TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 Cgsln Horq Damopfcot Delivery time and additional equipment of the machine on request.

Condition: excellent (used), Year of construction: 2018, operating hours: 27,000 h, Functionality: fully functional, controller model: Siemens S840D SL, VERTICAL TURNING CENTER FTC 180-F Units (operating hours and wear similar): 2x FTC 180-F Manual loading conversion (conveyor belt) FSC 600 available Systems were in production until 07/2021 Cjln Hpfsuni A Ijcogt Available immediately Systems still need to be dismantled Self-collection (disassembly and transport) at the Haldensleben site Dismantling/loading/transport can be offered as an option

Condition: excellent (used), Year of construction: 2018, operating hours: 26,651 h, Functionality: fully functional, controller model: Siemens S840D-SL, VERTICAL TURNING CENTER FTC 180-F WITH AUTOMATION FSC600 Systems (operating hours and wear similar): 6x FTC 180-F with FSC 600 available Machines were in production until 07/2021 Available immediately Systems still need to be dismantled Self-collection (disassembly and transport) at the Haldensleben site Celn Hpounixijfcjgt Dismantling/loading/transport can be offered as an option