Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Dsb E Djghgd So Ivlsut Injection Molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: used, Year of construction: 2010, operating hours: 4,500 h, Functionality: fully functional, Model: BF-3008 Version: Hydraulic/diesel Weight: 50 tons. No-load shaft speed: 3 rpm Wax shaft speed: 2.2 rpm Max. total developable cup: 130,000 daN*m Maximum permissible oil flow via gear motor: 240 l/1 Maximum operating pressure: 260 bar maximum total installed power unit: 368 kW Feeding motor unit Diesel engine: IVECO Mod. Cursor C 13 Djb Eswf Hnrs D Ivleut power 368 kW (500 hp) at 1800 rpm/1 Pump: Dual 280 cc each, variable displacement pump with constant power regulator Calibration: 360 kW (489 hp) at 1800 rpm 34cc servo and auxiliary pump Year of construction: 2007 Operating hours: 4500 hours

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic pressing system with a pressing force of 60 tons, designed for economical reduction of the volume of (recyclable) waste in industry and crafts: Dujb E D Ivjra A E Ueljt Cardboard boxes Foams PET bottles Insulating mats and other pressed materials. Horizontal baler, waste press DIXI 60 SLD with tipper Technical specifications: Pressure:, 60 tons, Unit pressure:, 6.81 kg/cm², Power supply:, 400V / 7.5kW Beam dimensions:, 800x1100x1200 mm, Number of ties:, 3 Beam weight:, approx. 370-410 kg, Tie:, manual Loading opening:, 990 x 1110 mm, Machine weight:, 5420 kg Average pressing cycle:, 47 sec Year of production:, 2011-2016

Condition: new, - Motor power 15kW - Control SPS supported, with two-hand safety circuit - cutting force 50to - idle speed ca.22,3 mm/sec - Splitting table straight design Dueb E D Ivjfbx Nbsljt - cutting channel: - max. length ca.3000mm - max. opening ca.1250mm - machine weight ca.4,8to goods to order price and further information on request

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding. Deb E D Ivjghgd Ioleut

Year of construction: 2007, Condition: used, Functionality: fully functional, Model: GM 2400 Overall dimensions: 8400 x 2400 mm H = 5500 mm Version: Hydraulic/diesel Panel mounting dimensions: 1850 x 2300 mm Blades: with interchangeable sectors Weight: 45000 kg Thickness of the buckets: 200 mm Motorization: 4 x 110 kW /4 x 200 kW/ 800 HP Duob E Dewf Hk Te Ivlot Diesel Engine: MAN/Type 02842 LE201/ 597kW Pumps: 2 x Rexroth hydraulics Year of construction: 2007

Condition: new, Container filling system / conveyor belt system Rotating tower with horizontally rotatable and longitudinally movable conveyor belt on stable galvanized frame, rotatably mounted. Incl. conveyor belt and high belt for automatic filling of three large capacity containers. SPS control distribution belt gear motor 2,2kW / conveyor width 900mm axis distance 5500mm drive slewing ring 0,6kW Rotation drive +/- 90 Conveyor belt conveyor width 600mm / centre distance 4000mm / drive 1,1kW Deb E D Ivsb Sp D Roljut High belt conveyor conveyor width 600mm / centre distance 4700mm / drive 1,1kW Colouring according to customer requirements Ordered goods Price and further information on request

Condition: new, General: The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Duebeghgd Do E D Ivlst Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Dusb E D Ivsghgdyeljt Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled.

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. Dobjghgdvs E D Ivljut APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Dujb Eeghgdno D Ivlet Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes.

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Dob E D Ieghgdkevlsut Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Technical details: Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Dujb E D Isghgdgjvlst Construction and demolition wood Veneers, MDF and chipboard

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a supplement to the ZWS series. The series was designed as a cost-effective solution specifically for shredding wood residues in small and medium-sized wood processing companies. AT A GLANCE: Compact design Stable welded steel construction Large-volume hopper for material feeding Rotor made of solid steel with screwed knife holders PLC control for fully automatic operation Technical data SMART 600: Inlet 600 x 840 mm Motor 11 / 15 kW Deb E Djghgdcs Ivlout Rotor diameter 250 mm Rotor speed 80 - 120 13 rotor knives Technical data SMART 600 S: Inlet 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 - 120 26 rotor knives

Condition: new, In every calculation of the economy and public life, waste transports are an essential factor. Here, it is less the weight but more the volume that is important. The constantly rising transport costs of these wastes are increasingly an economic problem. Particularly important in the sales sector is the disposal of the large quantities of styrofoam or packaging films. The VOLUMEN-ZERKLEINER ensures a volume reduction of up to 80 percent at this point. Bottles of all types and sizes, e.g. champagne bottles, can be crushed without any problems without a depressing device. The unpacking of expired foodstuffs is also possible. Furthermore, reject products such as medicines, data carriers or counterfeit products can be rendered unusable. Food scraps and food waste, even bones, can be shredded with the VR60, collected and converted into electricity and heat in biogas plants. Think also, for example, of a deposit bottle machine. The PET bottles are pressed and kept under lock and key until they are taken away because of the barcode present. By using the VOLUME SHREDDER, one could make the barcodes of the PET bottles unrecognizable and thus achieve a huge volume reduction. Shredded bottles could now be collected in a large container and would therefore not have to be collected daily from the collection points. The vertically moving, wear-free knives of the shredder ensure a quiet and clog-free working process. ALL ADVANTAGES AT A GLANCE Rotation-free shredder No material build-up due to non-rotating knives Automatic feeding by the movement of the knives Automatically reversing knives in V-shape prevent jamming or sticking Quick component change due to modular system Intelligent control by compact logic system (PLC) One-button operation Ejection of the material optionally also possible via conveyor belt Shredder module can also be integrated into existing plants Low blade wear and maintenance costs due to highly abrasion-resistant steel with a nominal hardness of 600 HBW VR60 IN DETAIL Dimensions: 90 cm x 70 cm x 85 cm Weight: approx. 190 kg Power consumption: 3 kW Connected load: 400 V three-phase alternating current Duebsghgc Ho E D Ivljt

Condition: new, For the industrial production of rectangular briquettes The ZBP 500 briquettes pressable materials into highly compressed briquettes. The briquettes are easy to store and can be easily transported thanks to their stackability. The briquettes are formed in the press chamber of the hydraulic press unit using a pressure cylinder. This means that up to nine briquettes can be produced per minute with a pressing force of 1 kg/cm². Standard equipment: Djb Eoghgcqe D Ivleut Safety limit switch for oil temperature and level Oil cooler Automatic briquette length monitoring Automatic fill level monitoring for hoppers Control cabinet with PLC control for fully automatic operation Options: Hopper attachment can be supplied individually according to customer requirements Press stamp with lettering/logo

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (on customer request) Left- or right-hand design Hydraulics with separate oil tank All series can also be equipped as "DUO" variants Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood processing industry. Enormous storage and transport costs are claimed for this on a daily basis. Briquetting presses offer an ideal solution to this problem, as briquettes, on the other hand, are easy and space-saving to store and transport. In addition, spontaneous combustion is much less. The briquetting presses require little space, are robustly built and equipped with low-maintenance technology. Whether wood, paper, biomass, foam or polystyrene - the ZBP briquettes any suitable material. With a throughput capacity of up to 35 - 130 kg/h, they are particularly suitable for small and medium-sized companies. Versatile set-up options due to availability as left-hand and right-hand versions. So start briquetting! Dusb Ejghgcis D Ivlst

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes can be ideally introduced for combustion in wood gasifiers and in smaller wood chip boilers / heating systems. Any material from a wood processing plant (chips, dust, etc.) can be briquetted. Wood chips, sawdust, sawdust etc. accumulate in all craft and industrial enterprises of the wood-processing industry. Enormous storage and transportation costs are claimed for this every day. Briquetting presses offer an ideal solution to this problem, as briquettes, on the other hand, are easy and space-saving to store and transport. In addition, spontaneous combustion is much less. The briquetting presses require little space, are robustly built and equipped with low-maintenance technology. Whether wood, paper, biomass, foam or polystyrene - the ZBP briquettes any suitable material. With a throughput capacity of up to 35 - 130 kg/h, they are particularly suitable for small and medium-sized companies. Dujb E D Ieghgcbevlst

Condition: new, machine/vehicle number: Baureihe PM / Neumaschine, The impact disc mills (fine mills) of the PM series are high-speed centrifugal mills for fine grinding of almost all thermoplastics. Typical tasks are the fine grinding of regrind or primary material from profile, pipe or sheet extrusion. In addition, these mills can be used in the food, chemical and pharmaceutical industries. Dujbjghgb Ne E D Ivljt The material is centrally fed by the stationary grinding disc with dosing element. Fine grinding takes place between the rotating and stationary grinding discs. The material is discharged by means of pneumatic suction.

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Width: 800 mm Rotor blades: 5 Dsbjghgb Eo E D Ivlout Stator blades: 2 Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Duobeghgbzs E D Ivljt Drive: 5.5 kW

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact cutting mills in the GSC series are completely soundproofed cutting mills and therefore particularly quiet. The integrated soundproofing ensures ideal accessibility to the cutting mill itself and for changing the blades and screens thanks to its well thought-out design. The noise protection is based on the use of the latest soundproofing materials. The housings, manufactured in a stable steel/welded construction, in conjunction with the V-cut rotors (except GSC 300/300), enable a long service life and universal applicability. The tangential housing geometry means that even bulky feed materials are easily accepted and shredded by the rotor. All machines in the GSC series always deliver high-quality ground material - regardless of whether the feed material is injection molding or blow molding waste, profiles, plates or films. The types in the GSC series are cost-effective, very reliable, easy to clean and have a long service life. Integrated sound insulation: The integrated sound insulation ensures a pleasant working environment with a low noise level. The optimal design ensures ideal accessibility to the machine. Duebeghgbwe E D Ivljt Mobile compact design: The integrated sound insulation makes the cutting mills compact and mobile. The machines can be transported to any location using a pallet truck or forklift. ZERMA offers a variety of options such as extraction systems, conveyor belts, metal detectors, fine material separators.

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Djbeghgbto E D Ivlout Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. Dueb E D Iveghgbhsljt In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA auxiliary mills of the GSL series 180/120 to 180/430 were developed as low-speed mills especially for applications in the injection moulding sector. They have a rotor diameter of 180 mm and working widths of 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be reground several times. The material to be shredded is fed via a noise-reduced feed hopper of sandwich construction, which is available in different versions depending on the type of feed. Depending on the task, the side mills of this series are mounted on a low or high chassis and completed with a corresponding suction/outlet trough. Together with numerous options, the side mills are extremely variable in use. In addition to the usual advantages of all low-speed mills, such as low noise emission and almost dust-free grinding material, the GSL 180/120 to GSL 180/430 beside-the-machine mills are characterized above all by their knife, rotor, quick-snap system and by their good accessibility. Dob Eoghgbdo D Ivljut