Trimming saw

ACMA 5200

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lhjdpov Hwk Uofx Ab Tjc Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Lodpfer Ilxvjx Ab Tjhc

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm Lodpexiu Dtofx Ab Tehc max. cutting height 170 mm motor 11 kW

Condition: ready for operation (used), Technical characteristics tank 1000 mm tank length 4600 mm trays dimension 700 x 4000 mm height 700 mm Lhjdpfx Abot Hzvws Tec max closed length 4700 mm electric boiler programming example: wood thickness 45/60 mm initial humidity 35/45% plate temperature 45/60 C ° total time 90 H (manufacturer data cannot be committed) Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 4600 mm Width: 1000 mm Height: 1100 mm Weight: 1500 Kg

Condition: used, Year of construction: 1989, functionality: fully functional, Used dip installation, manufacturer Bachhäubl HS2 12.5 - 12.50 m long x 1.50 m wide x 1.50 m high, clear internal dimensions; - Year of manufacture: 1989; - Control unit with timer relay for setting immersion time. - Wooden support with frame approx. 7 m long, hold-down device with 7 prongs, approx. 7 m long; - Basin interior in good condition, - single-walled, without collection tray! - Weight approx. 8.5 tons - Transport dimensions approx. 13.00 x 2.35 x 2.80 m Lhedpsx Aktwjfx Ab Toc - Installation is supplied without impregnation agent and without sludge, - free loaded on truck!

Condition: good (used), Year of construction: 1995, functionality: fully functional, Used dipping plant, manufacturer Wichmann, type WH 6.0 Lhodpfx Asx Akq Neb Tec - 6.0 m long x 1.75 m wide x 1.75 m high, clear internal dimensions; - Year of manufacture: 1995; - Control via SPS Moeller PS4 with program selection; - Wooden support approx. 5 m long, hold-down device approx. 5 m long with frame; - Double-walled with leakage sensor; - Internally partially rusted; - Transport dimensions: approx. 7.50 m long, 2.44 m wide, 2.98 m high (with guide rails removed); - Weight approx. 10.0 tons; - Plant empty, loaded onto truck free of charge.

Year of construction: 1985, condition: excellent (used), machine/vehicle number: (20020324 EG) - VK-RES, DEMAG KBK crane canopy crane runway with dimensions approx. 16.5 x 7 m (7 m bridge - double-girder crane) Payload / lifting capacity 500 kg - 0.5 tonnes Technical specifications of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable tray, brackets/suspension, etc. Incl. Demag PK2 500 kg chain hoist - lifting height approx. 4.5 m Crane is disassembled and immediately available Lhedpfxsty S I Ej Ab Tec Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or pickup by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125kg - 1600kg Please inquire about your crane runway, including load capacity and dimensions, without obligation.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet Ljdew Tkt Hjpfx Ab Tjhc S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device control system and electrical cabinet

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 170 mm, cutting width (max.): 1,000 mm, total length: 7,900 mm, total width: 2,250 mm, overall weight: 2,500 kg, cutting length (max.): 6,700 mm, saw drive: 11,000 W, Cutting length max. 6700 mm Cutting height max. 170 mm Cutting width between saw blade and fence approx. 1000 mm Saw motor 11 kW Saw blade lowers on return stroke Lhedpfju Hhpljx Ab Tec Hydraulic feed Table extension Cross fence Electric fence adjustment Can also be used for cross cutting

Year of construction: 1998, condition: excellent (used), 1. Stingl automatic retailer circular (multilama): - Cutting height 240mm - cutting width 740mm (passing 900mm or more) Ljdpfx Ajdzdvceb Tehc - Main motors 2 x 110 kw - Automatic advance - 4 cutting groups with hydraulic drive, variable (axle in axle) - longitudinal discharge and lateral transfer - Automatic cut to the desired length, integrated in the machine, immediately before the evacuation - Waste separator - Complete, modern electric panel 2. Stingl automatic circular cutting circle: - Cutting height 100mm - Cutting width 700mm - power 75kw - waste disposal with waste separators and the main piece separately - automatic (mechanical) sorting on 8-12 lengths - Complete, modern electric panel Both circulars are fully automatic and can work without operator, or a single operator for both! The mechanics of both circulars is Stingl !!!! The machine can also be sold separately.